0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

SPC Performance Audi B9 Front Upper Control Arm Set Left & Right Pair

Adjust front camber and caster +-1.5deg on the Audi B9 platform with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. For the left hand (LH) side, use #81381. For the right hand (RH) side, use part number #81382. Want to be able to adjust both sides? Use part #81383. Forged 6061-T6 Aluminum construction for maximized strength at minimum weight OE style, maintenance free, bootedball joints Large 18mm threaded adjuster links Replacement pinch bolts included California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

  • Kit includes both arms for both sides of the vehicle, order one kit per vehicle
  • OE style bushing and ball joint maintain factory feel and noise reduction
  • Forged 6051-T6 aluminum for strength and weight reduction
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Comes with pinch bolt hardware

1,232.27 $

SKU 81383
brand SPC Performance
Add to wishlist Add to compare

Description

Adjust front camber and caster +-1.5deg on the Audi B9 platform with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. For the left hand (LH) side, use #81381. For the right hand (RH) side, use part number #81382. Want to be able to adjust both sides? Use part #81383. Forged 6061-T6 Aluminum construction for maximized strength at minimum weight OE style, maintenance free, bootedball joints Large 18mm threaded adjuster links Replacement pinch bolts included California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

  • Kit includes both arms for both sides of the vehicle, order one kit per vehicle
  • OE style bushing and ball joint maintain factory feel and noise reduction
  • Forged 6051-T6 aluminum for strength and weight reduction
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Comes with pinch bolt hardware

Specification

Weight 8.4 kg
Dimensions 15.2 × 6.5 × 3.3 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

t
units_per_sku

1
upc

082642813835
brand

SPC Performance
part_number

81383

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: KTA252

    Whiteline 16-18 Volkswagen Golf R (MK7) Front Lower Control Arms

    No Reviews

    Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints (if applicable).
    Whiteline Control arm – lower arm.

    • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
    • Internal grease reservoirs provide continual self lubrication for optimum friction management.
    • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
    668.08 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 72610

    SPC Performance 99-11 Porsche 996/997 06-16 Cayman Front or Rear Adjustable Control Arm (Pair of 2)

    No Reviews

    Make the non-adjustable lower control arms on your 996 or 997 Porsche adjustable for up to 2 camber adjustment. This pair of 6061-T6 aluminum arms (2) from SPC will give easy on-the-car adjustability as well as get you track ready, while maintaining OE Noise Vibration and Harshness (NVH) levels with booted ball joints and high durometer bonded rubber bushings. SPC offers the only greaseable and rebuildable ball joint on the market. If you wear out your ball joint race with heavy track use, (it happens) you can get a rebuild kit and avoid the cost of a whole new arm. These arms come with preset turning torque, if you want a looser or tighter ball joint simply change preload by turning the retainer. This set can be used for front or rear, so if you want adjustability on all four corners get two sets. Note: Rear suspension fitment excludes vehicles with Xenon headlamp option. Note: modules equipped with hydraulic bushings must be pressed out and reused from the original control arms.
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    1,300.78 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 81372

    SPC Performance Audi and VW Right Adjustable Control Arm

    No Reviews

    Adjust front camber and caster +-1.5deg on the Audi C6 and D3 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the right hand (RH) side. For the left hand (LH) side, use part number #81371. Want to be able to adjust both sides? Use part number #81373. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • OE style bushing and ball joint maintain factory feel and noise reduction
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Kit includes both arms for the RIGHT side only
    • Comes with pinch bolt hardware
    616.13 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com