0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

SPC Performance Chevrolet Corvette C2/C3 Adjustable Upper Control Arms (Pair)

This unique, patented design provides the most adjustability and best clearance of any arm available for the ’63-’82 GM Corvette and ’65-’70 Impala applications. Sold as a pair, these forged steel adjustable arms come with ball studs that are 1/2″ taller than stock to improve camber curve. Dial in some caster combined with the ability to adjust camber, yields a truly ‘modern’ feeling suspension. The ball joints are greaseable and fully rebuildable. Additionally, OE length and 1/4″ extended studs are also available to fine tune ride characteristics and maximize specific suspension geometry. Consider combining upper control arms with available lower control arms to complete the transformation of any Pro Touring, Track Ready, or daily driven street use American Muscle car. Sold as pairs. US Patent No. 9,751,370.
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

  • Patented design provides most adjustment on the market
  • OE Length and additional 1/4″ length stud available
  • Front Adjustment Range: Camber/Caster ±3.00°
  • Greaseable and rebuildable ball joints
  • Required: 1 per axle
  • Sold as a pair

1,500.68 $

Out of stock
SKU 97160
brand SPC Performance

Description

This unique, patented design provides the most adjustability and best clearance of any arm available for the ’63-’82 GM Corvette and ’65-’70 Impala applications. Sold as a pair, these forged steel adjustable arms come with ball studs that are 1/2″ taller than stock to improve camber curve. Dial in some caster combined with the ability to adjust camber, yields a truly ‘modern’ feeling suspension. The ball joints are greaseable and fully rebuildable. Additionally, OE length and 1/4″ extended studs are also available to fine tune ride characteristics and maximize specific suspension geometry. Consider combining upper control arms with available lower control arms to complete the transformation of any Pro Touring, Track Ready, or daily driven street use American Muscle car. Sold as pairs. US Patent No. 9,751,370.
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

  • Patented design provides most adjustment on the market
  • OE Length and additional 1/4″ length stud available
  • Front Adjustment Range: Camber/Caster ±3.00°
  • Greaseable and rebuildable ball joints
  • Required: 1 per axle
  • Sold as a pair

Specification

Weight 26 kg
Dimensions 17 × 10.5 × 9.8 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

false
units_per_sku

1
upc

082642971603
brand

SPC Performance
part_number

97160

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 81388

    SPC Performance 17+ Audi A4/S4/ 18+ Audi A5/S5 Front Adj Upper Multi Link Control Arm Kit

    No Reviews

    Get ready for the track with this four (4) arm set of adjustable upper links for the Audi B9 platform. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis sealed flex joints replace the compliant inner bushings with a free pivoting, minimum compliance, joint. You will feel the difference in handling. Forged 6061-T6 Aluminum construction for maximized strength at minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjusterlinks Replacement pinch bolts included xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance joint. Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • Kit includes both arms for both sides of the vehicle, order one kit per vehicle
    • xAxis racing style sealed flex joints for reactive handling
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Comes with pinch bolt hardware
    1,500.68 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 81363

    SPC Performance 09-17 Audi A4/RS4/S4 / 09-16 Audi A5/S5 Front Adj Upper Multi Link Control Arm Kit

    No Reviews

    Adjust front camber and caster +-1.5deg on the Audi B8 and C7 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, and harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes four arms to replace both upper links on both sides of the vehicle. For the left hand (LH) side, use #81361. For the right hand (RH) side, use part number #81362. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • Kit includes both arms for both sides of the vehicle, order one kit per vehicle
    • OE style bushing and ball joint maintain factory feel and noise reduction
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Comes with pinch bolt hardware
    1,232.27 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 35665

    SPC Performance 2021-Up Ford Ranger Adjustable Upper Control Arms – Pair

    No Reviews

    Designed, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design gives more adjustability than any other arm on the market, use it in combination with cam adjusters on the lower arm to maximize tire clearance and minimize the need for frame mods. Use SPC #63020 to adjust thrust angle, replace OE lower cams with #86220. Sold as pairs. US Patent No. 7,513,514.
    Adjustable front upper control arms for the Ford Ranger with chromoly tube steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • New ball joint has 25% larger stud cross section than OE for superior strength & E-Nickel coating for superior corrosion protection while providing 80° of articulation & extended threads make these arms compatible with knuckle gusset kits
    • Arm’s adjustment range combine with OE adjusters corrects alignment angles for improved driveability and reduced tire wear & possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications
    • One piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation & low turning torque for reduced wear and extended life that tests like OE
    • New xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel & superior noise vibration and harshness (NVH) characteristics
    • Chromoly tube and forged steel nose construction provides maximum strength & clearance with additional caster provision for lifted vehicles built-in
    • New fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint
    • Front Adjustment Range: Camber ±2.00° / Caster -1.00° to +3.00°
    • Required: 1 per axle
    • Sold as a pair
    1,232.32 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 35670

    SPC Performance Ford Ranger Front Upper Adjustable Arms (PR)

    No Reviews

    Designed, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A tubular frame and Forged steel adjustment nose design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering”. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design gives more adjustability than any other arm on the market, use it in combination with cam adjusters on the lower arm to maximize tire clearance and minimize the need for frame mods. Use SPC #63020 to adjust thrust angle, replace OE lower cams with #86220. Sold as pairs. US Patent No. 7,513,514.
    Adjustable front upper control arms for the Ford Ranger with chromoly tube steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • New ball joint has 25% larger stud cross section than OE for superior strength & E-Nickel coating for superior corrosion protection while providing 80° of articulation & extended threads make these arms compatible with knuckle gusset kits
    • Arm’s adjustment range combine with OE adjusters corrects alignment angles for improved driveability and reduced tire wear & possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications
    • One piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation & low turning torque for reduced wear and extended life that tests like OE
    • New xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel & superior noise vibration and harshness (NVH) characteristics
    • Chromoly tube and forged steel nose construction provides maximum strength & clearance with additional caster provision for lifted vehicles built-in
    • New fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint
    • Front Adjustment Range: Camber ±2.00° / Caster -1.00° to +3.00°
    • For Aluminum Knuckles Only!
    • Required: 1 per axle
    • Sold as a pair
    1,232.32 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com