0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

SPC Performance Porsche Adjustable Trailing Link Pair

Upgrade the front or rear non-adjustable factory trailing arms on your Porsche 996 and 997 with this pair of fully adjustable arms from SPC Performance. Constructed from forged 6061-T6 aluminum with a hard black anodize finish, they adjust with an easy to reach threaded adjuster and maintain factory ride with SPC’s xAxis sealed flex joints which eliminate binding and bushing compliance. When you install these links on the front, you will be able to adjust caster +-1.25deg. SPC has maintained the OE form sothat you will be able to reuse your factory air deflector without modification. When you install these arms on the rear you will be able to adjust set-back +-1/2 inch (+-13mm). Designed for street use as well as the rigors of the track, these arms will letyou put your alignment angles where you want them for the way you drive. Need camber adjustment? Consider SPC’s adjustable camber arms, PN# 72610. These SPC arms are designed to work together to make your suspension fully adjustable. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

489.96 $

SKU 72630
brand SPC Performance
Add to wishlist Add to compare

Description

Upgrade the front or rear non-adjustable factory trailing arms on your Porsche 996 and 997 with this pair of fully adjustable arms from SPC Performance. Constructed from forged 6061-T6 aluminum with a hard black anodize finish, they adjust with an easy to reach threaded adjuster and maintain factory ride with SPC’s xAxis sealed flex joints which eliminate binding and bushing compliance. When you install these links on the front, you will be able to adjust caster +-1.25deg. SPC has maintained the OE form sothat you will be able to reuse your factory air deflector without modification. When you install these arms on the rear you will be able to adjust set-back +-1/2 inch (+-13mm). Designed for street use as well as the rigors of the track, these arms will letyou put your alignment angles where you want them for the way you drive. Need camber adjustment? Consider SPC’s adjustable camber arms, PN# 72610. These SPC arms are designed to work together to make your suspension fully adjustable. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Specification

Weight 4.9 kg
Dimensions 23.4 × 4.6 × 4.3 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

t
units_per_sku

1
brand

SPC Performance
part_number

72630

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 81361

    SPC Performance 09-17 Audi A4/RS4/S4 / 09-16 Audi A5/S5 Front Upper Multi Link Control Arm – Left

    No Reviews

    Adjust front camber and caster +-1.5deg on the Audi B8 and C7 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the front upper arms on the left hand (LH) side. For the right hand (RH) side, use part number #81362. Want to be able to adjust both sides? Use part number #81363. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • OE style bushing and ball joint maintain factory feel and noise reduction
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Kit includes both arms for the LEFT side only
    • Comes with pinch bolt hardware
    449.96 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 72052

    SPC Performance 03-08 Nissan 350Z/03-07 Infiniti G35 Rear Adjstbl Camber Arms w/Toe Cams&Lock Plates

    No Reviews

    Dial in +-3deg camber and +-2deg toe to maximize your suspension set-up on the 350Z and G35 with this set of race ready adjustable rear lower control arms (RLCA), camber lockout plates, and extended range toe cams from SPC. Specifically designed for track use, the arms include SPC’s xAxis sealed flex joints that perform like monoballs, but with non-metal bushings. These arms combine xAxis with forged steel receivers and straight-arm construction to minimize compliance under load. Included lockout plates will replace the OE camber cams to give you that extra assurance that your camber is locked in. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • Inludes SPC’s xAxis sealed flex joints that perform like monoballs for smooth operation
    • Race ready adjustable rear lower control arms designed for the performance minded
    • Maximize suspension set-up on the 350Z and G35
    • Dial in 3 camber and 2 toe
    402.44 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 35665

    SPC Performance 2021-Up Ford Ranger Adjustable Upper Control Arms – Pair

    No Reviews

    Designed, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design gives more adjustability than any other arm on the market, use it in combination with cam adjusters on the lower arm to maximize tire clearance and minimize the need for frame mods. Use SPC #63020 to adjust thrust angle, replace OE lower cams with #86220. Sold as pairs. US Patent No. 7,513,514.
    Adjustable front upper control arms for the Ford Ranger with chromoly tube steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • New ball joint has 25% larger stud cross section than OE for superior strength & E-Nickel coating for superior corrosion protection while providing 80° of articulation & extended threads make these arms compatible with knuckle gusset kits
    • Arm’s adjustment range combine with OE adjusters corrects alignment angles for improved driveability and reduced tire wear & possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications
    • One piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation & low turning torque for reduced wear and extended life that tests like OE
    • New xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel & superior noise vibration and harshness (NVH) characteristics
    • Chromoly tube and forged steel nose construction provides maximum strength & clearance with additional caster provision for lifted vehicles built-in
    • New fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint
    • Front Adjustment Range: Camber ±2.00° / Caster -1.00° to +3.00°
    • Required: 1 per axle
    • Sold as a pair
    899.96 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 81358

    SPC Performance 98-08 Audi A4/S4/RS4 / 98-05 VW Passat Front Adj Upper Racing Control Arm Kit

    No Reviews

    Get ready for the track with this four (4) arm set of adjustable upper links for the Audi B5/B6/B7 and C5 platforms. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis sealed flex joints replace the compliant inner bushings with a free pivoting, minimum compliance joint. You will feel the difference in handling. SPC Arms Feature: Forged 6061-T6 Aluminum contruction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance joint Don’t need the added benefits of our performance arms? Use SPC arms with OE type bushings – part #81353 for two sets of arms to correct both sides of the vehicle, #81351 for the left side, or part #81352 for the right. Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • Kit includes both arms for both sides of the vehicle, order one kit per vehicle
    • xAxis racing style sealed flex joints for reactive handling
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Comes with pinch bolt hardware
    1,095.95 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com