Intercooler Kits

GReddy Nissan Silvia S14/S15 24 LS Intercooler Kit

GReddy Nissan Skyline Trust Intercooler Spec-LS T-24 ECR33 Kit

GReddy Trust 92-96 Toyota Mark II JZX90 Spec-LS Intercooler Kit (Special Order)

Maximize the effect of your intercooler setup with the Mishimoto Mitsubishi Lancer Evolution 7/8/9 Intercooler Kit! This full kit includes the Mishimoto race intercooler as well as the Mishimoto upper and lower intercooler pipes and couplers. This kit provides a direct-fit unit and completely replaces the restrictive and inefficient factory setup. The Mishimoto intercooler utilizes a large, 3.5-inch thick bar-and-plate core that has been designed with a strategic core composition to provide optimal reductions in intake temperatures and minimal pressure loss. This kit will support vehicles from stock to 600 whp! Our 350 whp test vehicle showed an 8 whp / 10 wtq increase in power compared to the stock intercooler and the Mishimoto intercooler was able to reduce temperatures by 28 degrees Fahrenheit. Not only was this intercooler, kit designed with power and efficiency in mind, but our engineers also crafted smooth cast end tanks to promote proper air dispersion through the core, improved airflow, and exceptional durability. Low air intake temperatures are vital for maximum power output, tuning, and performance. Whether you are taking your Evo to the local rallycross or competing in a time-attack, lower temperatures will be beneficial. Mishimoto intercooler pipes are crafted from lightweight, mandrel-bent aluminum and eliminate restrictions in the factory piping, which allows for improved airflow and quicker turbocharger spool. The included silicone couplers provide improved heat and pressure tolerance and can handle all the boost you can throw at them. This kit is available with a silver or stealth black powder-coated intercooler finish for enhanced durability and protection against road debris. As with all our products, the Mishimoto Evolution Race Intercooler includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.
2001-2002 Mitsubishi Lancer Evolution 2.0 Liter, 2003-2006 Mitsubishi Lancer Evolution 2.0 Liter W5M51-2, 2003-2006 Mitsubishi Lancer Evolution 2.0 Liter W5M51-2, 2005-2006 Mitsubishi Lancer Evolution MR 2.0 Liter W6MAA-1, 2005-2006 Mitsubishi Lancer Evolution RS 2.0 Liter W5M51-2, 2006 Mitsubishi Lancer Evolution SE 2.0 Liter W5M51-2

• Provided 8 whp / 10 wtq and reduced intake temperatures by 28 F (16 C) compared to the stock cooler on a vehicle making 350 whp
• Large, 3.5-in thick bar-and-plate core with strategic core composition for optimal cooling and minimal pressure loss
• Direct-fit kit for the Mitsubishi Lancer Evolution 7/8/9

Mishimoto has released a performance intercooler kit for the 2003-2007 Dodge 5.9L Cummins.This kit includes everything you need to improve airflow, substantially decrease air-charge temperatures, reduce EGTs, and support your truck at any power level.The first key component is the Mishimoto intercooler piping; our engineers have maximized airflow by eliminating restrictive bends, allowing for a smooth and unimpeded airflow.The piping is constructed of mandrel bent 3.5 aluminum polished to a mirror finish.This kit includes Mishimoto silicone boots with DuraCore technology and constant-tension T-bolt clamps for accurate and consistent holding force.Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.This effectively increases the life of our boots by preventing leaks and blowouts.This package is rounded out with the Mishimoto intercooler featuring extremely durable cast aluminum end tanks and a bar-and-plate core, all designed to provide cool, dense air to your engine.Our intercooler features an increase in core volume and reduces pressure drop, which results in an overall increase in engine efficiency.All the components in this kit are engineered to last, just like your truck.Offered with either a black or silver core, the Mishimoto 5.9L Cummins intercooler kit is protected by our signature lifetime warranty.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.
2003 Dodge Ram 2500 5.9 Liter 45RFE, 2003 Dodge Ram 2500 5.9 Liter 46RE, 2003 Dodge Ram 2500 5.9 Liter 47RE, 2003-2007 Dodge Ram 2500 5.9 Liter 48RE, 2004-2007 Dodge Ram 2500 5.9 Liter 545RFE, 2007 Dodge Ram 2500 5.9 Liter 68RFE, 2007 Dodge Ram 2500 5.9 Liter AS68RC, 2005-2007 Dodge Ram 2500 5.9 Liter G56, 2004 Dodge Ram 2500 5.9 Liter NV3500, 2003-2005 Dodge Ram 2500 5.9 Liter NV4500, 2003-2004 Dodge Ram 2500 5.9 Liter NV4500HD, 2003-2005 Dodge Ram 2500 5.9 Liter NV5600, 2003 Dodge Ram 3500 5.9 Liter 45RFE, 2003 Dodge Ram 3500 5.9 Liter 46RE, 2003 Dodge Ram 3500 5.9 Liter 47RE, 2003-2007 Dodge Ram 3500 5.9 Liter 48RE, 2004-2007 Dodge Ram 3500 5.9 Liter 545RFE, 2007 Dodge Ram 3500 5.9 Liter AS68RC, 2005-2007 Dodge Ram 3500 5.9 Liter G56, 2004 Dodge Ram 3500 5.9 Liter NV3500, 2003-2005 Dodge Ram 3500 5.9 Liter NV4500, 2004 Dodge Ram 3500 5.9 Liter NV4500HD, 2003-2005 Dodge Ram 3500 5.9 Liter NV5600

• Bar-and-plate construction with cast aluminum end tanks
• End tanks strategically designed for optimal airflow
• Mandrel-bent polished aluminum intercooler pipes

Fed up with high EGTs and an intercooler setup that isn’t keeping up with the demands of your Duramax? The solution is finally here with the Mishimoto 2006-2010 Chevrolet/GMC 6.6L Duramax intercooler kit! This kit includes everything you need to improve airflow, substantially decrease air-charge temperatures, and support your truck at any power level.The Mishimoto intercooler piping is the first key component; our engineers have maximized airflow by eliminating restrictive bends, allowing for a smooth and unimpeded airflow.The piping is constructed of mandrel bent aluminum polished to a flawless finish.This kit includes Mishimoto silicone boots with DuraCore technology and constant-tension T-bolt clamps for accurate and consistent holding power.Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.This effectively increases the life of our boots by preventing leaks and blowouts.This package is rounded out with the Mishimoto intercooler that features cast aluminum end tanks and a bar-and-plate core, all designed to provide cool, dense air to your engine.The Mishimoto Duramax intercooler features a core volume significantly greater than the factory cooler, allowing for cooler intake temperatures, lower EGTs, and increased boost pressure tolerance.All the components in this kit are engineered to last, just like your truck.Offered with either a black or silver core, the Mishimoto 6.6L Duramax intercooler kit is protected by our signature lifetime warranty.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.
2006-2010 Chevrolet Silverado 2500 HD 6.6 Liter 1000, 2006-2007 Chevrolet Silverado 2500 HD 6.6 Liter 4L80-E, 2007-2010 Chevrolet Silverado 2500 HD 6.6 Liter 6L90, 2006-2007 Chevrolet Silverado 2500 HD 6.6 Liter NV4500, 2006 Chevrolet Silverado 2500 HD 6.6 Liter S6-650, 2006-2007 Chevrolet Silverado 3500 6.6 Liter 1000, 2006-2007 Chevrolet Silverado 3500 6.6 Liter 4L80-E, 2006-2007 Chevrolet Silverado 3500 6.6 Liter NV4500, 2006 Chevrolet Silverado 3500 6.6 Liter S6-650, 2007-2010 Chevrolet Silverado 3500 HD 6.6 Liter 1000, 2007-2010 Chevrolet Silverado 3500 HD 6.6 Liter 6L90, 2006-2010 GMC Sierra 2500 HD 6.6 Liter 1000, 2006-2007 GMC Sierra 2500 HD 6.6 Liter 4L80-E, 2007-2010 GMC Sierra 2500 HD 6.6 Liter 6L90, 2006-2007 GMC Sierra 2500 HD 6.6 Liter NV4500, 2006 GMC Sierra 2500 HD 6.6 Liter S6-650, 2006-2007 GMC Sierra 3500 6.6 Liter 1000, 2006-2007 GMC Sierra 3500 6.6 Liter 4L80-E, 2006-2007 GMC Sierra 3500 6.6 Liter NV4500, 2006 GMC Sierra 3500 6.6 Liter S6-650, 2007-2010 GMC Sierra 3500 HD 6.6 Liter 1000, 2007-2010 GMC Sierra 3500 HD 6.6 Liter 6L90

• Mishimoto intercooler featuring cast aluminum end tanks and a bar-and-plate core
• Mandrel-bent aluminum polished pipes eliminate restrictive bends
• Reduces turbo stress and extends life

A high-horsepower Evo demands an intercooler setup that provides optimal airflow and a cool, dense charge of air. Modified vehicles running high boost pressures often have increased air intake temperatures (AITs) and heat soak, both of which can result in diminished performance. Keep your intake temperatures under control with the Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler kit. This intercooler kit is a direct bolt-on unit engineered specifically for the Evo X. Thanks to an efficient 3.5-inch thick bar-and-plate core, this intercooler provides optimal heat dissipation and low AITs. The robust cast aluminum end tanks provide superior durability and smooth, uninterrupted airflow. The intercooler core is a strategic fin design that promotes substantial heat exchange while providing minimal pressure loss across the core. This kit also features polished 2.5-inch mandrel-bent aluminum piping and four-layer 100-percent silicone couplers with heat-resistant embedded fibers. These couplers offer increased heat and pressure tolerance compared to the factory rubber connections. Dependable charge-air connections are essential for reliable operation. The Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit includes high-quality stainless steel T-bolt clamps for each connection. These clamps provide the holding power you need for increased boost pressures! The Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler kit provides a dyno-proven increase of 10 whp and 10 tq, and it will support modified vehicles up to 600 whp! Whether you are making a pass at the drag strip or sliding around a rally stage, this intercooler kit will provide the cooling that your engine needs to perform at its best. This intercooler is available with a powder-coated finish in Sleek Silver or Stealth Black. As with all our products, this intercooler kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.
2010-2011 Mitsubishi Lancer Evolution GSR 2.0 Liter TC-SST, 2008 Mitsubishi Lancer Evolution GSR 2.0 Liter W5M6A, 2010-2014 Mitsubishi Lancer Evolution GSR 2.0 Liter W5M6A, 2008 Mitsubishi Lancer Evolution MR 2.0 Liter TC-SST, 2010-2014 Mitsubishi Lancer Evolution MR 2.0 Liter TC-SST, 2010-2011 Mitsubishi Lancer Evolution MR Touring 2.0 Liter TC-SST

• Full aluminum cast end tanks provide increased durability and smooth, uninterrupted airflow
• Efficient 3.5-in thick bar-and-plate core provides optimal heat dissipation and low AITs
• 10 whp and 10 tq bolt-on power increase

A high-horsepower Evo demands an intercooler that provides optimal airflow and a cool, dense charge of air. Modified vehicles running high-boost pressures often suffer from increased air intake temperatures (AITs) and heat soak, which can result in diminished performance. Keep your intake temperatures under control with the Mishimoto Lancer Evolution X Performance Intercooler. This intercooler is a direct bolt-on unit engineered specifically for the Evo X. Thanks to an efficient 3.5-inch thick bar-and-plate core, this intercooler provides optimal heat dissipation and low AITs. The robust cast aluminum end tanks provide superior durability and smooth, uninterrupted airflow. The Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler provides a dyno-proven increase of 10 hp and 10 tq, and it will support modified vehicles up to 600 hp! This intercooler core is equipped with a strategic fin design that promotes substantial heat exchange while providing minimal pressure loss across the core. Whether you are making a pass at the drag strip or sliding around a rally stage, this intercooler will provide the cooling that your engine needs to perform at its best. This intercooler is available with a powder-coated finish in either silver or stealth black. As with all our products, this intercooler includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.
2010-2011 Mitsubishi Lancer Evolution GSR 2.0 Liter TC-SST, 2008 Mitsubishi Lancer Evolution GSR 2.0 Liter W5M6A, 2010-2014 Mitsubishi Lancer Evolution GSR 2.0 Liter W5M6A, 2008 Mitsubishi Lancer Evolution MR 2.0 Liter TC-SST, 2010-2014 Mitsubishi Lancer Evolution MR 2.0 Liter TC-SST, 2010-2011 Mitsubishi Lancer Evolution MR Touring 2.0 Liter TC-SST

• Full aluminum cast end tanks provide increased durability and smooth, uninterrupted airflow
• Efficient 3.5-in thick bar-and-plate core provides optimal heat dissipation and low AITs
• 10 whp and 10 tq bolt-on power increase

A high-horsepower Evo demands an intercooler that provides optimal airflow and a cool, dense charge of air. Modified vehicles running high-boost pressures often suffer from increased air intake temperatures (AITs) and heat soak, which can result in diminished performance. Keep your intake temperatures under control with the Mishimoto Lancer Evolution X Performance Intercooler. This intercooler is a direct bolt-on unit engineered specifically for the Evo X. Thanks to an efficient 3.5-inch thick bar-and-plate core, this intercooler provides optimal heat dissipation and low AITs. The robust cast aluminum end tanks provide superior durability and smooth, uninterrupted airflow. The Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler provides a dyno-proven increase of 10 hp and 10 tq, and it will support modified vehicles up to 600 hp! This intercooler core is equipped with a strategic fin design that promotes substantial heat exchange while providing minimal pressure loss across the core. Whether you are making a pass at the drag strip or sliding around a rally stage, this intercooler will provide the cooling that your engine needs to perform at its best. This intercooler is available with a powder-coated finish in either silver or stealth black. As with all our products, this intercooler includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.
2010-2011 Mitsubishi Lancer Evolution GSR 2.0 Liter TC-SST, 2008 Mitsubishi Lancer Evolution GSR 2.0 Liter W5M6A, 2010-2014 Mitsubishi Lancer Evolution GSR 2.0 Liter W5M6A, 2008 Mitsubishi Lancer Evolution MR 2.0 Liter TC-SST, 2010-2014 Mitsubishi Lancer Evolution MR 2.0 Liter TC-SST, 2010-2011 Mitsubishi Lancer Evolution MR Touring 2.0 Liter TC-SST

• Full aluminum cast end tanks provide increased durability and smooth, uninterrupted airflow
• Efficient 3.5-in thick bar-and-plate core provides optimal heat dissipation and low AITs
• 10 whp and 10 tq bolt-on power increase

Mishimoto has released a performance intercooler kit for the 2008-2010 Ford 6.4L Powerstroke.This kit includes everything you need to improve airflow, substantially decrease air-charge temperatures, reduce EGTs, and support your truck at any power level.The first key component is the Mishimoto cold-side intercooler pipe; our engineers have maximized airflow by eliminating restrictive bends, allowing for a smooth and unimpeded airflow.The pipe is constructed of mandrel bent aluminum polished to a mirror finish.This kit includes Mishimoto silicone boots with DuraCore technology and constant-tension T-bolt clamps for accurate and consistent holding power.Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.This effectively increases the life of our boots by preventing leaks and blowouts.This package is rounded out with the Mishimoto intercooler featuring a significant increase in core volume, extremely durable cast aluminum end tanks, and a bar-and-plate core, all designed to provide cool, dense air to your engine.Our intercooler reduces pressure drop, which results in an overall increase in engine efficiency.All the components in this kit are engineered to last, just like your truck.Offered with either a black or silver core, the Mishimoto 6.4L Powerstroke intercooler kit is protected by our signature lifetime warranty.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.
2008-2010 Ford F-250 Super Duty 6.4 Liter 5R110W, 2008-2010 Ford F-250 Super Duty 6.4 Liter S6-650, 2008-2010 Ford F-350 Super Duty 6.4 Liter 5R110W, 2008-2010 Ford F-350 Super Duty 6.4 Liter S6-650, 2008-2010 Ford F-450 Super Duty 6.4 Liter 5R110W, 2008-2010 Ford F-450 Super Duty 6.4 Liter S6-650, 2008-2010 Ford F-550 Super Duty 6.4 Liter 5R110W, 2008-2010 Ford F-550 Super Duty 6.4 Liter S6-650

• Mandrel-bent polished aluminum cold-side intercooler pipe
• Bar-and-plate construction with cast aluminum end tanks
• End tanks strategically designed for optimal airflow

OEM intercooler setups are not designed to handle the higher levels of boost that come with modifying your turbocharged vehicle.The Mishimoto intercooler and piping kit is designed as an ideal upgrade for the 2.0L Turbo 2010-2012 Hyundai Genesis Coupe intercooler.The intercooler and piping kit reduces intake temperatures and increases overall cooling efficiency, resulting in a safe increase in horsepower.Unlike most other aftermarket intercooler kits available, modifications to the front bumper and removal of the crash bar are not necessary, since our kit retains OEM fitment.Included in this comprehensive kit is a polished aluminum, black, or gold bar and plate style Z Line intercooler, a complete set of aluminum charge piping, along with all t-bolt clamps and silicone couplers needed for direct bolt-on installation.The Mishimoto Hyundai Genesis Coupe intercooler and piping kit will fit with the OEM radiator, as well as the Mishimoto Hyundai Genesis Aluminum Radiator.Note: For your taste, only one side of the intercooler has the Mishimoto logo.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.
2010-2012 Hyundai Genesis Coupe 2.0 Liter A5SR1, 2010-2012 Hyundai Genesis Coupe 2.0 Liter M6VR1

• Lightweight, mandrel-bent, aluminum pipes eliminate restrictive bends in the stock piping
• Smooth cast end tanks allow the best possible airflow in and out of the intercooler
• No modifications to the front bumper or removal of the crash bar are necessary

OEM intercooler setups are not designed to handle the higher levels of boost that come with modifying your turbocharged vehicle.The Mishimoto intercooler and piping kit is designed as an ideal upgrade for the 2.0L Turbo 2010-2012 Hyundai Genesis Coupe intercooler.The intercooler and piping kit reduces intake temperatures and increases overall cooling efficiency, resulting in a safe increase in horsepower.Unlike most other aftermarket intercooler kits available, modifications to the front bumper and removal of the crash bar are not necessary, since our kit retains OEM fitment.Included in this comprehensive kit is a polished aluminum or black bar and plate style Z Line intercooler, a complete set of aluminum charge piping, along with all t-bolt clamps and silicone couplers needed for direct bolt-on installation.The Mishimoto Hyundai Genesis Coupe intercooler and piping kit will fit with the OEM radiator, as well as the Mishimoto Hyundai Genesis Aluminum Radiator.Note: For your taste, only one side of the intercooler has the Mishimoto logo.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.
2010-2012 Hyundai Genesis Coupe 2.0 Liter A5SR1, 2010-2012 Hyundai Genesis Coupe 2.0 Liter M6VR1

• Lightweight, mandrel-bent, aluminum pipes eliminate restrictive bends in the stock piping
• Smooth cast end tanks allow the best possible airflow in and out of the intercooler
• No modifications to the front bumper or removal of the crash bar are necessary