Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler(r) water-methanol injection kit is available for forced induction and N/A applications (supercharged/turbocharged).
Stage 1 Dual Carb N/A or Forced Induction Water-Methanol Injection kit (Nylon)
Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler(r) water-methanol injection kit is available for forced induction and N/A applications (supercharged/turbocharged).
Stage 1 Dual Carb N/A or Forced Induction Water-Methanol Injection kit (Nylon)
| Weight | 10 kg |
|---|---|
| Dimensions | 20 × 15 × 5 cm |
| air_freight_prohibited | false |
| not_carb_approved | true |
| carb_acknowledgement_required | true |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 653374977739 |
| brand | Snow Performance |
| part_number | SNO-202 |
These new controllers retain the “Boost Safe” injection failsafe system, which is an output that will activate if there is a short, loss of continuity or high or low voltage or low fluid condition, allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system.Simplified WiringThe new wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. An integrated Pump Ground circuit is included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive.Improved Injector Flow Rate & Nozzle SizesAEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water/methanol injection, which further optimizes charge air cooling and detonation control. Three resized injector nozzles are in each kit and allow for improved flow capability (a flow graph is available on our website).New Low Level Fluid IndicatorA more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.
V2 Water/Methanol Injection Kit, Standard Controller – Internal MAP with 35psi max, 200psi WM Pump, 1.15 Gallon Reservoir, Conductive Fluid Level Sensor
The AEM Water/Methanol Solenoid is a 2-way, normally closed 12V valve with stainless steel body for use with AEM Water/Methanol Injection Systems. The shut-off valve provides an accurate and consistent shut off and prevents siphoning under vacuum.AEM offers performance automotive accessories to upgrade your existing water/methanol injection (WMI) system including inline water/methanol fluid filters, WMI flow gauges, the Water/Methanol Failsafe Device gauge, and water/methanol system nozzle and jet kits.30-3326 High-Flow Low-Current WMI Solenoid Prevents Unintended Flow
Stainless steel Water/Methanol Injection Solenoid that eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. High flow capability (3,600cc/min) and an low current draw of only 0.75A
Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all turbo diesel owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven diesel vehicles that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! This system is 50-State Legal! (C.A.R.B E.0.# D-723).
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Universal (Red High Temp Nylon Tubing, Quick-Connect Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Stage 3 Controller/Harness, 20′ Red High Temp Nylon Tubing, EGT Probe Assembly, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve, E.O.# D-723
Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all turbo diesel owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven diesel vehicles that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! This system is 50-State Legal! (C.A.R.B E.0.# D-723).
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Universal (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive Stage 3 Controller/Harness, (3) 1′, (1) 2′, (1) 20′ Stainless Steel Braided Line, EGT Probe Assembly, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve, E.O.# D-723
Reviews
There are no reviews yet.