0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

Snow Performance Pumpless Water/Methanol System

NX Pumpless water/methanol systems inject the water/methanol mixture into the intake charge pipe at high pressure(user adjustable 100-400PSI) providing excellent atomization even in high boost applications. These systems include a pressurized reservoir that eliminates the need for an electric pump. The adjustable pressure regulator allows the user to fine tune the amount of water methanol injected into the engine without swapping different size nozzles. This system also includes a water/methanol solenoid, billet aluminum distribution block, filtered nozzles, and nickel plated fittings.

1,693.81 $

Out of stock
SKU SNO-2190-BRD
brand Snow Performance

Description

NX Pumpless water/methanol systems inject the water/methanol mixture into the intake charge pipe at high pressure(user adjustable 100-400PSI) providing excellent atomization even in high boost applications. These systems include a pressurized reservoir that eliminates the need for an electric pump. The adjustable pressure regulator allows the user to fine tune the amount of water methanol injected into the engine without swapping different size nozzles. This system also includes a water/methanol solenoid, billet aluminum distribution block, filtered nozzles, and nickel plated fittings.

Specification

Weight 15 kg
Dimensions 20 × 15 × 15 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

false
units_per_sku

1
upc

653374979467
brand

Snow Performance
part_number

SNO-2190-BRD

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 30-3352

    AEM V3 Water/Methanol Injection Kit – Multi Input (NO Tank)

    No Reviews

    Racers with high compression naturally aspirated engines or boosted engines who are looking for an alternative to boost-dependent water/methanol injection controllers have a solution in AEM’s Multi-Input WMI controller. The multiple input design enables users to install AEM’s Water/Methanol Injection Kit on both high compression naturally aspirated vehicles (NA) via the MAF/IDC settings and ultra-high boost vehicles (above 40 PSI) using an external MAP sensor. The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency-based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF. The Multi-Input controller is offered in three kits; a one-gallon tank kit with a single injector for gas engines (PN 30-3350), a tank-less kit with a single injector (PN 30-3352), and a five-gallon tank kit with two injectors (PN 30-3351) for HD high-output gasoline applications.
    V2 Water/Methanol Nozzle and Controller Kit, Multi Input Controller – 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP, 200psi WM Pump, DOES NOT INCLUDE TANK

    • · Allows user to choose one of several signal inputs to control flow.
    • · No reservoir allows integration of custom of 3rd party reservoir.
    • · Optional wiring for W/M solenoid built into wiring harness
    • · V3 nozzle included, enhanced atomization of W/M mixture
    701.01 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SNO-211-BRD

    Snow Performance 2.5 Boost Cooler Water Methanol Injection Kit w/ SS Brd Line & 4AN Fittings

    No Reviews

    Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection system is available for all forced induction applications (supercharged/turbocharged). The Stage 2 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2 introduces the VC-50 Controller (ISO 9001 Manufactured). The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to your OEM gauges or mix and match up to two colors. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
    Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol Injection Kit w/ 2.5 Gallon Tank. (Stainless Steel Braided Line, 4AN Fittings)

    1,245.10 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 30-3350

    AEM V3 One Gallon Water/Methanol Injection Kit – Multi Input

    No Reviews

    Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing-without using high-octane racing fuel-for power gains of up to 20%. AEM’s Water Injection Kits utilize robust hardware and deliver more advanced features than any other comparably priced water/methanol injection system.
    V2 Water/Methanol Injection Kit, Multi Input Controller – 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP, 200psi WM Pump, 1.15 Gallon Reservoir, Conductive Fluid Level Sensor
    Boost Dependent and Multi-Input (0-5v/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid “Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device) Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable Precision-machined billet-aluminum injector with integral check valve Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min) 1.15-gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available) 20 feet of injection tubing included LED dash light for system status and low fluid warning

    • Terminated harness features positive lock connector with integrated pump ground circuit and additional wire for optional on/off flow solenoid
    • One machined billet injector with integral check valve to prevent unintended flow
    • Recirculation-style pump with integral fittings for quiet operation
    • LED dash light for system status and low fluid warning
    • Includes “Boost Safe” readiness failsafe system
    • 20 ft. of high-pressure Nylon injection tubing
    770.85 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SNO-50100

    Snow Performance Stg 3 Boost Cooler Water Injection Kit TD (Red Hi-Temp Tubing and Quick Fittings)

    No Reviews

    Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all turbo diesel owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven diesel vehicles that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! This system is 50-State Legal! (C.A.R.B E.0.# D-723).
    Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Universal (Red High Temp Nylon Tubing, Quick-Connect Fittings)
    Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Stage 3 Controller/Harness, 20′ Red High Temp Nylon Tubing, EGT Probe Assembly, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve, E.O.# D-723

    1,426.37 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com