0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

Snow Performance 94-17 Ford Stg 3 Boost Cooler Water Injection Kit (w/SS Braided Line & 4AN)

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstroke owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstrokes that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Ford 7.3/6.0/6.4/6.7 Powerstroke (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive Stage 3 Controller/Harness, (3) 1′, (1) 2′, (1) 20′ Stainless Steel Braided Line, EGT Probe Assembly, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

1,711.65 $

Out of stock
SKU SNO-520-BRD
brand Snow Performance

Description

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstroke owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstrokes that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Ford 7.3/6.0/6.4/6.7 Powerstroke (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive Stage 3 Controller/Harness, (3) 1′, (1) 2′, (1) 20′ Stainless Steel Braided Line, EGT Probe Assembly, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

Specification

Weight 14.4 kg
Dimensions 20.3 × 15.9 × 15.6 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

false
units_per_sku

1
upc

653374500814
brand

Snow Performance
part_number

SNO-520-BRD

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: SNO-210-BRD

    Snow Performance Stg 2 Boost Cooler F/I Prog. Water Injection Kit (SS Braided Line 4AN Fittings)

    No Reviews

    Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection system is available for all forced induction applications (supercharged/turbocharged). The Stage 2 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2 introduces the VC-50 Controller (ISO 9001 Manufactured). The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to your OEM gauges or mix and match up to two colors. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
    Stage 2 Boost Cooler(tm) Forced Induction Progressive Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
    Kit Contents: 300 PSI UHO Pump, 3Qt Tank, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 5′ Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

    • Adjustable Boost Activated Progressive Water-Meth Delivery
    • 300 PSI UHO Pump/SP Hypersonic Nozzles
    • 100% Methanol Resistant
    • High Flow Check Valve
    • Low Level Monitoring
    • Made In U.S.A.
    941.39 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SNO-2132-BRD

    Snow Performance 11-17 Mustang Stg 2 Boost Cooler F/I Water Injection Kit (SS Braid Line & 4AN)

    No Reviews

    Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for forced induction (supercharged/turbocharged) 2011+?Ford 5.0 Coyote engines. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) 2011+ Ford Mustang GTs equipped with the 5.0L Coyote engine.
    Stage 2 Boost Cooler(tm) 2011-2017 Ford Mustang GT 5.0L Forced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
    Kit Contents: 300 PSI UHO Pump, 2.5 Gal Tank Upgrade, 2011+ 5.0L Ford Mustang GT Throttle Body Spacer Injection Plate Upgrade, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 15′ Stainless Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic Nozzles/High Flow Solenoid/High Flow Check Valve

    1,283.73 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 30-3351

    AEM V2 5 Gallon Diesel Water/Methanol Injection Kit – Multi Input

    No Reviews

    Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing-without using high-octane racing fuel-for power gains of up to 20%. AEM’s Water Injection Kits utilize robust hardware and deliver more advanced features than any other comparably priced water/methanol injection system.
    V2 Water/Methanol Injection Kit, Multi Input Controller – 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP, 200psi WM Pump, 5 Gallon Reservoir, Conductive Fluid Level Sensor
    Heavy-Duty Waterproof High Pressure Injection Pump – Safe for Engine Bay/Frame Rail Mounting AEM’s internally-bypassed water/methanol injection pump is waterproof and safe for mounting in loactions that are exposed the elements. It does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.

    • Terminated harness features positive lock connector with integrated pump ground circuit and additional wire for optional on/off flow solenoid
    • One machined billet injector with integral check valve to prevent unintended flow
    • Recirculation-style pump with integral fittings for quiet operation
    • LED dash light for system status and low fluid warning
    • Includes “Boost Safe” readiness failsafe system
    • 20 ft. of high-pressure Nylon injection tubing
    958.44 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SNO-50100

    Snow Performance Stg 3 Boost Cooler Water Injection Kit TD (Red Hi-Temp Tubing and Quick Fittings)

    No Reviews

    Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all turbo diesel owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven diesel vehicles that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! This system is 50-State Legal! (C.A.R.B E.0.# D-723).
    Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Universal (Red High Temp Nylon Tubing, Quick-Connect Fittings)
    Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Stage 3 Controller/Harness, 20′ Red High Temp Nylon Tubing, EGT Probe Assembly, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve, E.O.# D-723

    1,426.37 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com