Replacement V3 Water/Methanol Injectors (Qty 2), Includes Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of flow for each injector
Includes 2 Complete Injector Assemblies and 2 sets of Swirl Generators
Replacement V3 Water/Methanol Injectors (Qty 2), Includes Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of flow for each injector
Includes 2 Complete Injector Assemblies and 2 sets of Swirl Generators
| Weight | 0.08 kg |
|---|---|
| Dimensions | 3 × 2 × 0.5 cm |
| air_freight_prohibited | false |
| not_carb_approved | true |
| carb_acknowledgement_required | true |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| regular_stock | t |
| units_per_sku | 1 |
| upc | 840879027025 |
| brand | AEM |
| part_number | 30-3313 |
Snow Performance Water-Methanol Injection systems provide increased performance with or without nitrous. Water Methanol Injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing which results in increased power and torque. When used with Nitrous, the need for timing retard is greatly reduced or eliminated. Boosted applications especially benefit from reduced intake temperatures. NX Water / Methanol systems include the latest technology and the highest quality components available. This innovative plate combines the performance and safety benefits of Water Methanol injection with the horsepower and throttle response improvements of a carburetor shear plate. This design places the water methanol nozzle in the center of the Carb bores for excellent cylinder to cylinder distribution. The system includes a high output water methanol pump, a 3 quart tank, filtered nozzles, push lock line as well as everything needed for the installation. Fits on Dominator or 4500 series intake flanges. Stage 2 systems are activated by a two dial electronic controller that progressively controls water methanol output by either boost or vacuum.
5 Gallon Tank that includes Conductive Fluid Level Sensor
V2 Water/Methanol Injection 5 Gallon Tank Kit with Conductive Fluid Level Sensor
For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 4 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder (Quick-Connect Fittings/High Temp Nylon). NOTE: Nozzles not included and must be purchased separately.
Kit Contents: 20′ Red High Temp Nylon Tubing, 4-Port Distribution Block, High Flow Solenoid Upgrade, 4 Nozzle Holders, Required Quick Connect Fittings
The New Snow Performance High-capacity High Pressure Tank holds up to 54 fluid ounces (1600ml) of water/methanol!,, The tank is manufactured from billet aluminum and anodized in black. The High-capacity tank uses O-ring seals to insure no leaks!, Pumpless water/methanol systems utilize your current nitrous system or Co2 pressure system to inject the water/methanol mixture into the intake charge pipe at high pressure through the included user adjustable 100-400PSI regulator, eliminating the need for an electric pump while providing excellent atomization even in extreme boost applications. The adjustable pressure regulator allows the user to fine tune the amount of water methanol injected into the engine without swapping different size nozzles. Both systems include:,, 54oz High Capacity Tank, Stainless Braided Lines, 0-500psi Gauge, 100-400psi Adjustable Regulator, 0-35psi Hobbs Switch, LED Activation Status Indicator, Water/Methanol Solenoid, 100% Methanol Resistant Fittings (Nickel Plating, Hard Anodizing, EPDM), Snow Performance Hyper-Sonic Water/Methanol Nozzle, Snow Performance Low Profile Nozzle Holder, Snow Performance Low Profile High Flow Check Valve, Relay and Relay Harness
Reviews
There are no reviews yet.