-
5 Gallon Tank that includes Conductive Fluid Level Sensor
V2 Water/Methanol Injection 5 Gallon Tank Kit with Conductive Fluid Level Sensor- -Comes with all the hardware necessary for installation.
- -Universal and can be used on 3rd party applications.
- -Comes with level sensor with flying lead.
- -Preinstalled 90° 1/4″ push lock fitting.
-
V2 Water/Methanol HD Controller Kit – Internal MAP with 40psi max
V2 Water/Methanol HD Controller Kit – Internal MAP with 40psi max, CONTROLLER ONLY- -Barb fitting on the controller to connect boost line
- -Color coded harness for ease of installation.
- -System status LED on controller.
- -40PSI rated HD controller.
-
V2 Water/Methanol Multi Input Controller Kit- 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP
V2 Water/Methanol Multi Input Controller Kit- 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP, CONTROLLER ONLY- -Color coded harness for ease of installation.
- -Can be used on NA and boosted applications.
- -Multiple triggers to activate system.
- -LED system status light
-
The new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. The Multi Input controller has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.
V2 Water/Methanol Injection 1.15 Gallon Tank Kit with Conductive Fluid Level Sensor- · Mounting hardware included to ease installation process
- · Compact design for various installation options
- · Built-in level sensor to warn of low level
- · Large reservoir cap to help with refill
-
The new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. The Multi Input controller has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.
V2 Water/Methanol Standard Controller Kit – Internal MAP with 35psi max, CONTROLLER ONLY- -Barb fitting on the controller to connect boost line
- -Color coded harness for ease of installation.
- -System status LED on controller.
- -Integrated fuse.
-
Replacement V3 Water/Methanol Injectors (Qty 2), Includes Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of flow for each injector
Includes 2 Complete Injector Assemblies and 2 sets of Swirl Generators- Includes Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of flow for each injector
- T-Adapter included to run dual nozzles
- Better Atomizing design
- Inject up to 2000cc
-
Water/Methanol Injection 200psi Recirculation Pump w/ 3/8 in NPT Fittings
Water/Methanol Injection 200psi Recirculation Pump w/ 3/8 -inch NPT Fittings- 3/8 NPT Port for custom Hard/Braided Line
- Flows 1 Gallon per minute
- Directional flow
- up to 200 PSI
-
The Nitrous Express direct port nitrous plates are designed to fit factory modern Hemi Engines. This setup is capable of spraying anywhere from 100-400 horsepower. Direct port plates offer an advantage compared to a single nozzle or a throttle body plate, giving you the best distribution possible by feeding an equal amount of nitrous and fuel to each cylinder. The plates bolt under the intake manifold making installation quick and simple. The plates come in at 5/8″ thick so there will be no need to run an aftermarket hood. Made entirely of billet aluminum, anodized in black, and as always proudly made in the USA,, This system includes: Direct port Hemi nitrous plates with stainless fittings, TPS Auto learn switch so the nitrous only activates at wide-open throttle and automatically turns off when you let your foot off the accelerator. Jetting for 100-400HP, Stainless braided N2O and fuel line, Master arming switch, Relay and relay harness, Fuel rail adapter, 15Lb bottle with the billet aluminum Lightning 500 bottle valve and stainless bottle brackets, All necessary hardware to complete the installation.
Direct Port Plate System For 5.7,6.1 and 6.4 Hemi W/ 15Lb Bottle- Direct Port Plate System
-
The Nitrous Express direct port nitrous plates are designed to fit factory modern Hemi Engines. This setup is capable of spraying anywhere from 100-400 horsepower. Direct port plates offer an advantage compared to a single nozzle or a throttle body plate, giving you the best distribution possible by feeding an equal amount of nitrous and fuel to each cylinder. The plates bolt under the intake manifold making installation quick and simple. The plates come in at 5/8″ thick so there will be no need to run an aftermarket hood. Made entirely of billet aluminum, anodized in black, and as always proudly made in the USA,, This system includes: Direct port Hemi nitrous plates with stainless fittings, TPS Auto learn switch so the nitrous only activates at wide-open throttle and automatically turns off when you let your foot off the accelerator. Jetting for 100-400HP, Stainless braided N2O and fuel line, Master arming switch, Relay and relay harness, Fuel rail adapter, 10Lb bottle with the billet aluminum Lightning 500 bottle valve and stainless bottle brackets, All necessary hardware to complete the installation.
Direct Port Plate System For 5.7,6.1 and 6.4 Hemi W/ 10Lb Bottle- Direct Port Plate System
-
For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 4 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder (Quick-Connect Fittings/High Temp Nylon). NOTE: Nozzles not included and must be purchased separately.
Kit Contents: 20′ Red High Temp Nylon Tubing, 4-Port Distribution Block, High Flow Solenoid Upgrade, 4 Nozzle Holders, Required Quick Connect Fittings -
The New Snow Performance High-capacity High Pressure Tank holds up to 54 fluid ounces (1600ml) of water/methanol!,, The tank is manufactured from billet aluminum and anodized in black. The High-capacity tank uses O-ring seals to insure no leaks!, Pumpless water/methanol systems utilize your current nitrous system or Co2 pressure system to inject the water/methanol mixture into the intake charge pipe at high pressure through the included user adjustable 100-400PSI regulator, eliminating the need for an electric pump while providing excellent atomization even in extreme boost applications. The adjustable pressure regulator allows the user to fine tune the amount of water methanol injected into the engine without swapping different size nozzles. Both systems include:,, 54oz High Capacity Tank, Stainless Braided Lines, 0-500psi Gauge, 100-400psi Adjustable Regulator, 0-35psi Hobbs Switch, LED Activation Status Indicator, Water/Methanol Solenoid, 100% Methanol Resistant Fittings (Nickel Plating, Hard Anodizing, EPDM), Snow Performance Hyper-Sonic Water/Methanol Nozzle, Snow Performance Low Profile Nozzle Holder, Snow Performance Low Profile High Flow Check Valve, Relay and Relay Harness
-
Snow Performance Water-Methanol Injection systems provide increased performance with or without nitrous. Water Methanol Injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing which results in increased power and torque. When used with Nitrous, the need for timing retard is greatly reduced or eliminated. Boosted applications especially benefit from reduced intake temperatures. NX Water / Methanol systems include the latest technology and the highest quality components available. This innovative plate combines the performance and safety benefits of Water Methanol injection with the horsepower and throttle response improvements of a carburetor shear plate. This design places the water methanol nozzle in the center of the Carb bores for excellent cylinder to cylinder distribution. The system includes a high output water methanol pump, a 3 quart tank, filtered nozzles, push lock line as well as everything needed for the installation. Fits on Dominator or 4500 series intake flanges. Stage 2 systems are activated by a two dial electronic controller that progressively controls water methanol output by either boost or vacuum.
Showing 1–12 of 17 results