6 Cylinder Rocker/Pushrod Kit Includes: Full Set of (16) Magnum Rocker Arms.
Our rocker arm and pushrod kit for Chevrolet 173 V6 includes a set of our 1.6 ratio Magnum rockers and 6.165″ long High Energy pushrods.
Available in a 1.52 ratio kit under RP1414-12
6 Cylinder Rocker/Pushrod Kit Includes: Full Set of (16) Magnum Rocker Arms.
Our rocker arm and pushrod kit for Chevrolet 173 V6 includes a set of our 1.6 ratio Magnum rockers and 6.165″ long High Energy pushrods.
Available in a 1.52 ratio kit under RP1414-12
| Weight | 5.6 kg |
|---|---|
| Dimensions | 13.6 × 9.6 × 2.3 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 036584480099 |
| brand | COMP Cams |
| part_number | RP1414-12 |
Edelbrock part #77770 Red Roller Rocker arms are designed for small block Chevy’s using 3/8″ studs. This 1.5:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are centerless ground for superior quality. A high quality Torrington needle bearing fulcrum combined with a roller tip ensure smooth operation and performance. The full body design will accommodate up to 1.65″ diameter springs. Thick-walled adjusting nuts and 4140 steel poly locks are included.
Edelbrock part #77770 Red Roller Rocker arms are designed for small block Chevy’s using 3/8″ studs. This 1.5:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum.
Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L)
COMP Cams is proud to announce another industry first: a bolt-in-ready Bushed Shaft Rocker System for GM LS engines. Thanks to innovative engineering, this patent pending Bushed Shaft Rocker System increases valve train stability and durability while decreasing deflection and providing bolt-in convenience for LS1, LS3 and LS7 cylinder heads. The COMP Cams Bushed Shaft Rocker System improves valve train stability and durability by securing all eight rocker arms onto a single rocker shaft. Thin tri-layer rocker arm bushings reduce rocker arm deflection and eliminate the high Hertz loading that can occur in needle bearing equipped rockers. Reduced rocker deflection increases valve train stiffness, ensuring that your LS is more efficient and durable under high loads. COMP Cams engineers worked to ensure long-term valve train durability by perfecting rocker to valve stem geometry and provisioning for supplementary pressurized oiling via threaded ends on the rocker shafts. Additionally, each rocker shaft is Plasma Nitrided, further increasing the system’s durability even when used with aggressive solid roller valve trains. The COMP Cams Bushed Shaft Rocker System for GM LS delivers high-level valve train stability, precise fitment, truer valve train geometry and increased load-bearing capacity in a package that is ready to bolt in that requires no machine work.
This pair of Max-Lift BSR Shaft Mount Rockers for Rectangle Port (LS3/L92) LS engines is a bolt-in rocker upgrade that requires no machine work to install. Clears factory valve covers while greatly increasing valvetrain rigidity.
See 1981-16 for LS1/2/6. See 1983-16 for LS7.
Pontiac: G8 09 – 09 6.2 L Engine, Hummer: H2 08 – 09 6.2 L Engine, Chevrolet: Tahoe 08 – 09 6.2 L Engine, GMC: Yukon XL 1500 07 – 14 6.2 L Engine, Chevrolet: Silverado 1500 07 – 09 6 L Engine, GMC: Yukon XL 1500 07 – 09 6 L Engine, Chevrolet: Suburban 1500 07 – 09 6 L Engine, Chevrolet: SS 14 – 17 6.2 L Engine, GMC: Sierra 08 – 16 6.2 L Engine, GMC: Sierra 1500 07 – 09 6 L Engine, Chevrolet: Corvette 08 – 13 6.2 L Engine, Pontiac: G8 08 – 09 6 L Engine, Cadillac: CTS 09 – 15 6.2 L Engine, Cadillac: Escalade EXT 07 – 13 6.2 L Engine, Cadillac: Escalade ESV 07 – 16 6.2 L Engine, GMC: Sierra 1500 07 – 13 6.2 L Engine, GMC: Yukon 07 – 14 6.2 L Engine, Chevrolet: Silverado 1500 09 – 13 6.2 L Engine, Chevrolet: Camaro 10 – 16 6.2 L Engine, Cadillac: Escalade 07 – 16 6.2 L Engine, Chevrolet: Avalanche 07 – 09 6 L Engine
Ferrea Acura Integra 92-93 1.7L B17 / 94-00 1.8L B18 / 01-06 2.0L K20 Roller Rocker Arms – Set of 8
Edelbrock part #77780 Red Roller Rocker arms are designed for small block Ford’s using 3/8 studs. This 1.6:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are centerless ground for superior quality. A high quality Torrington needle bearing fulcrum combined with a roller tip ensure smooth operation and performance. The full body design will accommodate up to 1.65″ diameter springs. Thick-walled adjusting nuts and 4140 steel poly locks are included.
Edelbrock part #77780 Red Roller Rocker arms are designed for small block Ford’s using 3/8 studs. This 1.6:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum.
Ford:Small-Block:289 (4.7L)-351W (5.8L)
Reviews
There are no reviews yet.