-
Give your 2018-2023 Kia Stinger GT extra cooling power with the Mishimoto Performance Intercooler Kit. The Stinger made quite the splash upon its release and shook up the mid-sized sports sedan segment. While the Lambda II GDI 3.3T provides one of the best platforms out there today, the intercooling system has the potential to hold the Stinger back. We’ve replaced the entire intercooling system, from turbo to throttle body to provide optimized airflow. The Mishimoto Performance Intercooler replaces the tube and fin core coupled to plastic end tanks with a robust bar and plate core, TIG-welded to cast aluminum end tanks for vastly improved heat dissipation and flow. We also expanded our core for a 94-percent increase in core volume and a 74-percent increase in external fin surface area.We kept the aluminum construction of the stock pipes, but increased the inner diameter to 3in for increased flow through the system with minimal pressure drop. We also made sure to overhaul the piping merger manifold, increasing the inlets to 2in and outlet to 3in for a 51-percent boost in flow straight out of the turbos, while retaining compatibility with the stock recirculation valves. Our piping kit is finished in a sleek micro-wrinkle black powder coat to retain the OEM+ look under the hood and is linked together with our 5-layer silicone couplers.Our intercooler kit isn’t just about a new look but will perform. Once on the dyno, the combination of the larger piping diameters, and increased intercooler size equated to a 29 degree F drop in outlet temperatures with a gain of 8whp and 8wtq on stock tuning. We also made sure to turn up the boost with our testing and installed a stage 1 map tune on our Stinger and recorded a 41 degree F drop in outlet temperature with a 6whp and 8wtq gain on top of the tune.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.- Includes performance intercooler, piping, cast aluminum merge manifold, and couplers for optimal flow and performance
- Max power gains of 8 whp and 8 wtq on stock tune with an additional 6 whp and 8 wtq on top of stage 1 tuning
- Drops intercooler outlet temperature by 29F on stock tune and 41F on stage 1 tune
-
Give your 2018-2023 Kia Stinger GT extra cooling power with the Mishimoto Performance Intercooler Kit. The Stinger made quite the splash upon its release and shook up the mid-sized sports sedan segment. While the Lambda II GDI 3.3T provides one of the best platforms out there today, the intercooling system has the potential to hold the Stinger back. We’ve replaced the entire intercooling system, from turbo to throttle body to provide optimized airflow. The Mishimoto Performance Intercooler replaces the tube and fin core coupled to plastic end tanks with a robust bar and plate core, TIG-welded to cast aluminum end tanks for vastly improved heat dissipation and flow. We also expanded our core for a 94-percent increase in core volume and a 74-percent increase in external fin surface area.We kept the aluminum construction of the stock pipes, but increased the inner diameter to 3in for increased flow through the system with minimal pressure drop. We also made sure to overhaul the piping merger manifold, increasing the inlets to 2in and outlet to 3in for a 51-percent boost in flow straight out of the turbos, while retaining compatibility with the stock recirculation valves. Our piping kit is finished in a sleek micro-wrinkle black powder coat to retain the OEM+ look under the hood and is linked together with our 5-layer silicone couplers.Our intercooler kit isn’t just about a new look but will perform. Once on the dyno, the combination of the larger piping diameters, and increased intercooler size equated to a 29 degree F drop in outlet temperatures with a gain of 8whp and 8wtq on stock tuning. We also made sure to turn up the boost with our testing and installed a stage 1 map tune on our Stinger and recorded a 41 degree F drop in outlet temperature with a 6whp and 8wtq gain on top of the tune.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.- Includes performance intercooler, piping, cast aluminum merge manifold, and couplers for optimal flow and performance
- Max power gains of 8 whp and 8 wtq on stock tune with an additional 6 whp and 8 wtq on top of stage 1 tuning
- Drops intercooler outlet temperature by 29F on stock tune and 41F on stage 1 tune
-
Kia came out of nowhere to stake their claim in the luxury sedan market segment. With the intuitive automatic transmission coupled to the 3.3L twin-turbocharged V6, It’s no wonder the likes of standard benchmarks are worried. The real question is, how long will that last. Direct injection combined with the high-compression of turbocharging means a hotbed for carbon buildup. Luckily, Mishimoto is here to keep your Stinger running to its full potential with the 2018+ Kia Stinger GT Direct-Fit Catch Can Kit.The 2018+ Kia Stinger GT catch can kit is mounted with a robust, application-specific bracket, our patent pending compact 2-port catch can is installed in line with the factory PCV system in order to separate fuel vapors and oil droplets from the relieving crankcase pressure. As an extra layer of defense, our catch can also includes a 50-micron bronze filter designed for capturing any rogue blow-by particles. Installation is a breeze with our pre-molded hoses, keeping the time you spend under the hood to less than 30 minutes. Like all of our products, the Mishimoto 2018+ Kia Stinger GT Direct-Fit Catch Can Kit is covered under the Mishimoto Lifetime Warranty to protect your investment on more than one level.Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you?ve seen what We’ve seen in the bottom of our catch cans, you won?t want that draining back into your oil either.
Engine oil catch can kit designed to capture oil vapors and prevent buildup in the intake system. Helps maintain efficiency, reduce carbon deposits, and improve performance with durable components and easy installation.- Robust, application-specific bracket mounts the can in a serviceable location away from most intake and supercharger kits
- Single can mounts in line with the PCV system to separate oil from air using a 50 micron bronze filter
- Installs in under 30 minutes
-
Upgrade your 2019-2025 Chevy Silverado or GMC Sierra 1500 with a radiator built to handle the toughest jobs and weekend adventures. Crafted from TIG-welded aluminum with durable aluminum side brackets, our Performance Aluminum Radiator replaces the factory’s brittle plastic components to eliminate cracks and leaks while ensuring a precise, secure fit. — With a 119% increase in core volume and 31% increase in fluid capacity over stock, this radiator delivers exceptional cooling performance to keep your engine running at peak efficiency. A 7-row internal oil cooler improves heat transfer compared to the OEM’s 6-row design, while strutted tubes along the top and bottom rows add strength and rigidity to withstand vibration, pressure, and chassis flex. Foam applied to the back of the core ensures a proper fan shroud seal, maximizing airflow for consistent cooling no matter the conditions. — For added protection, the radiator includes a magnetic drain plug that captures debris and metal fragments circulating through the cooling system. Whether you’re hauling heavy loads, towing uphill, or exploring the backcountry, our Performance Aluminum Radiator keeps your truck cool, reliable, and ready for anything. Like every Mishimoto product, it’s backed by our Lifetime Warranty for complete confidence on every drive.
Aluminum radiator engineered for efficient heat dissipation and optimal engine cooling. Precision-fit design ensures easy installation, corrosion resistance, and reliable performance across varied driving conditions.- Strutted tubes along the top and bottom rows for added rigidity under vibration and chassis flex
- Oversized 7-row internal oil cooler for improved cooling efficiency compared to stock rejection
- TIG-welded aluminum construction for maximum durability and reliability
-
Mishimoto’s performance intercooler is the perfect upgrade for your 2019-2024 Dodge Ram 6.7L Cummins. Engineered for exceptional cooling capacity and reliability, this intercooler features robust cast aluminum end tanks and a dense bar-and-plate core. With increased core volume, it supports substantial boost pressures, making it ideal for both stock and modified trucks. The included silicone boots, featuring DuraCore(TM) technology, provide superior resistance to heat, pressure, fuel, and oil, ensuring long-lasting performance. Available in sleek silver or stealth black, this intercooler is a must-have for Cummins owners seeking to elevate their truck’s performance. Backed by Mishimoto’s Lifetime Warranty, you can trust in the quality and durability of this premium upgrade.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.- Demonstrated to reduce outlet temperatures by 20F compared to stock
- 44.7% less restrictive than stock
- 63% larger core than stock
-
The 2019 – 2023 Ford Ranger 2.3L EcoBoost is one of the most capable small trucks on the planet, and it deserves a cooling system that’s equally capable. This Mishimoto Performance Aluminium Radiator is constructed from high-quality aluminium with precision TIG-welded end tanks for increased durability and resistance to heat and pressure. The direct-fit design means this radiator fits without any trimming or modifications. To make sure our radiator performs as well as it fits, we’ve also increased its core volume by 78 percent and its fluid capacity by 51.3 percent. Core thickness is increased by 43.7 percent, and external fin surface area is increased by 95 percent to make the most of the air coming through the grille. This Mishimoto 2019 – 2023 Ford Ranger 2.3L EcoBoost Performance Aluminium Radiator includes a magnetic drain plug to keep your coolant free of metallic debris and is backed by our Mishimoto Lifetime Warranty to keep your Ranger cool as long as you own it.
Aluminum radiator engineered for efficient heat dissipation and optimal engine cooling. Precision-fit design ensures easy installation, corrosion resistance, and reliable performance across varied driving conditions.- Increases fluid capacity by 51.3-percent over stock radiator
- Increases core volume by 78-percent over stock radiator
- 43.7-percent thicker core than stock radiator
-
From the crisp, cool air atop Pikes Peak to the smell of freshly cut grass at Fenway Park. No matter where you are or where you’re going, the 2019-2023 Ford Ranger was built to take in the world. To do that, however, your 2.3L EcoBoost Ranger needs to breathe, and Mishimoto is here to let it breathe easy.Our 2019-2023 Ford Ranger 2.3L EcoBoost Performance Air Intake lets your truck breathe wherever you go. Our intake’s precision-engineered and rotational-molded design maximizes airflow to the turbocharger. By eliminating bends and smoothing the flow path, we’ve improved airflow by 49-percent over the stock intake.By improving flow, we’ve let the 2.3L EcoBoost under the hood of your Ranger breathe, resulting in power gains up to 6.3 horsepower and 7.9 lb-ft of torque on the stock tune. Even better, the Mishimoto 2019-2023 Ranger 2.3L EcoBoost intake installs in only about an hour and is backed by our Mishimoto Lifetime Warranty for a lifetime of performance.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- Dyno-proven gains of up to 6.3 horsepower and 7.9 lb-ft of torque on stock tune
- Improves flow over stock intake by 49-percent
- Installs in about 1 hour
-
Whether you’re cruising the city streets or crawling through dusty trails, help your 2019-2023 Ford Ranger breath freely and cleanly with our Borne Off-Road Snorkel and Mishimoto Performance Intake Bundle. With this bundle, you will be getting the best of both worlds: added performance from the Mishimoto Performance Air Intake to give you the power you need to conquer any terrain and added protection from dirt, dust, debris, and water with the Borne Off-Road Snorkel. Our snorkel provides a fresh air inlet that is over 24 inches above the stock location, allowing your engine to pull in cleaner air. The precision rotational-molded tube is made from durable, UV-resistant cross-linked polyethylene that can withstand the heat of the sun and any debris the trail can throw at it. Moving inside the engine bay, the Mishimoto Performance Air Intake kit features a precision-engineered and rotational-molded design that maximizes airflow to the turbocharger and reduces restriction. By eliminating bends and smoothing the flow path, we’ve improved airflow by up to 49% over the stock intake. The last piece of the puzzle is the provided optional Fresh Air Duct Plug. Our performance intake allows the Ranger to breathe freely through its large fresh air duct that pulls air from the grille area. This duct provides fresh and cool air to the intake on the street, but it needs to be sealed on the trail. This intake plug does just that. When installed, this plug allows your Ranger to breath only through the snorkel for the freshest air on the trail. The plug fits securely into the duct but is easily removable when it’s time to return to the street. The Mishimoto 2019-2023 Ford Ranger Intake Bundle combines flow, durability, and improved utility to provide you with the ultimate intake system upgrade. As with all Mishimoto and Borne Off-Road products, this kit also includes our signature Lifetime Warranty.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- Designed in-house utilizing the latest technology in 3D CAD modeling, 3D printing, and flowbench testing technology
- Complete intake bundle includes Borne Off-Road Snorkel kit and Mishimoto Performance Air Intake System
- Fits 2019-2023 Ford Ranger 2.3L EcoBoost
-
Whether you’re cruising the city streets or crawling through dusty trails, help your 2019-2023 Ford Ranger breath freely and cleanly with our Borne Off-Road Snorkel and Mishimoto Performance Intake Bundle. With this bundle, you will be getting the best of both worlds: added performance from the Mishimoto Performance Air Intake to give you the power you need to conquer any terrain and added protection from dirt, dust, debris, and water with the Borne Off-Road Snorkel. Our snorkel provides a fresh air inlet that is over 24 inches above the stock location, allowing your engine to pull in cleaner air. The precision rotational-molded tube is made from durable, UV-resistant cross-linked polyethylene that can withstand the heat of the sun and any debris the trail can throw at it. Moving inside the engine bay, the Mishimoto Performance Air Intake kit features a precision-engineered and rotational-molded design that maximizes airflow to the turbocharger and reduces restriction. By eliminating bends and smoothing the flow path, we’ve improved airflow by up to 49% over the stock intake. The last piece of the puzzle is the provided optional Fresh Air Duct Plug. Our performance intake allows the Ranger to breathe freely through its large fresh air duct that pulls air from the grille area. This duct provides fresh and cool air to the intake on the street, but it needs to be sealed on the trail. This intake plug does just that. When installed, this plug allows your Ranger to breath only through the snorkel for the freshest air on the trail. The plug fits securely into the duct but is easily removable when it’s time to return to the street. The Mishimoto 2019-2023 Ford Ranger Intake Bundle combines flow, durability, and improved utility to provide you with the ultimate intake system upgrade. As with all Mishimoto and Borne Off-Road products, this kit also includes our signature Lifetime Warranty.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- Designed in-house utilizing the latest technology in 3D CAD modeling, 3D printing, and flowbench testing technology
- Complete intake bundle includes Borne Off-Road Snorkel kit and Mishimoto Performance Air Intake System
- Fits 2019-2023 Ford Ranger 2.3L EcoBoost
-
The 2019-2023 Ford Ranger 2.3L EcoBoost is one of the most capable small trucks on the planet. With its direct-injected and turbocharged engine producing 310 lb-ft of torque, the 2019-2023 Ranger combines efficiency with capability. The 2.3L EcoBoost engine under the hood of the Ranger produces plenty of power to let you roam free, but what if you want more? Adding a tune and more boost is a great way to squeeze more power from the Ranger, but the stock intercooler pipes can only handle so much boost. That’s why Mishimoto has developed this aluminum intercooler pipe and boot kit for the 2019-2023 Ford Ranger 2.3L EcoBoost.Our all-aluminum intercooler pipes are constructed of mandrel-bent aluminum with a polished or micro-wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe, allowing for up to 25-percent better flow and dyno-proven max gains of 9.7 wheel horsepower and 9 lb-ft of torque when combined with Mishimoto intercooler pipes. The Mishimoto intercooler pipes are also larger than stock, with a 19.86-percent increase in volume to let your turbo breathe easy.This kit includes Mishimoto Silicone Boots with DuraCore(TM) technology. Mishimoto DuraCore technology is a synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to standard silicone, DuraCore(TM) provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto high-torque worm gear clamps for consistent holding power.Like all our Ranger products, this 2019-2023 Ford Ranger 2.3 EcoBoost Intercooler Pipe and Boot Kit is a direct fit and is backed by our Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- Increases internal volume by 26.4-percent on the hot side and 13.7-percent on the cold side for more power potential
- Improves flow by 25.6-percent on the hot side and 16.6-percent on the cold side
- Dyno-proven max gains of 9.78 hp and 9 ft-lbs of torque
-
The 2019-2023 Ford Ranger 2.3L EcoBoost is one of the most capable small trucks on the planet. With its direct-injected and turbocharged engine producing 310 lb-ft of torque, the 2019-2023 Ranger combines efficiency with capability. The 2.3L EcoBoost engine under the hood of the Ranger produces plenty of power to let you roam free, but what if you want more? Adding a tune and more boost is a great way to squeeze more power from the Ranger, but the stock intercooler pipes can only handle so much boost. That’s why Mishimoto has developed this aluminum intercooler pipe and boot kit for the 2019-2023 Ford Ranger 2.3L EcoBoost.Our all-aluminum intercooler pipes are constructed of mandrel-bent aluminum with a polished or micro-wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe, allowing for up to 25-percent better flow and dyno-proven max gains of 9.7 wheel horsepower and 9 lb-ft of torque when combined with Mishimoto intercooler pipes. The Mishimoto intercooler pipes are also larger than stock, with a 19.86-percent increase in volume to let your turbo breathe easy.This kit includes Mishimoto Silicone Boots with DuraCore(TM) technology. Mishimoto DuraCore technology is a synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to standard silicone, DuraCore(TM) provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto high-torque worm gear clamps for consistent holding power.Like all our Ranger products, this 2019-2023 Ford Ranger 2.3 EcoBoost Intercooler Pipe and Boot Kit is a direct fit and is backed by our Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- Increases internal volume by 26.4-percent on the hot side and 13.7-percent on the cold side for more power potential
- Improves flow by 25.6-percent on the hot side and 16.6-percent on the cold side
- Dyno-proven max gains of 9.78 hp and 9 ft-lbs of torque
-
It’s only been four years since the first Ford Ranger 2.3L EcoBoost rolled off the assembly line, but those four years have been rough on some of the plastic parts under your Ranger’s hood. Your coolant expansion tank is probably beginning to show its age thanks to thousands of heating and cooling cycles bathed in orange or pink coolant. It’s likely developed that classic dingy yellow tone, and it may be hard to see the coolant level through the side of the tank that gets more opaque by the day. Soon enough, that plastic expansion tank will become brittle, and one misplaced elbow or especially deep pothole has the potential to start a cascade of coolant. Luckily, Mishimoto’s 2019-2023 Ford Ranger all-aluminum expansion tank is built to last a lifetime.—-Our Ford Ranger EcoBoost expansion tank is constructed from aircraft-grade aluminum and precision TIG-welded to create a durable expansion tank that can withstand thousands of heat cycles and high pressures without cracks or leaks. On the outside, we’ve included a high-visibility sight glass and stamped cold-fill line to make checking your coolant level easy, while the available micro-wrinkle black powder coated or polished finishes suit any style. Our fill neck also accepts the stock expansion tank cap to keep maintenance easy. Inside, baffles keep coolant cycling into the engine, no matter how steep the road or trail gets.—-Like all of our products, this aluminum expansion tank for your 2019-2023 Ford Ranger 2.3L EcoBoost is backed by our Mishimoto Lifetime Warranty for a lifetime of durability and worry-free running.
Engine coolant reservoir designed to store and regulate excess coolant for proper system operation. Durable construction resists heat and pressure, helping prevent leaks and maintain optimal temperature.- Internal baffles keep coolant near overflow port during aggressive driving, preventing air entry into coolant system
- High-visibility sight glass and stamped cold-fill line allow for quick reading of coolant level
- Full-aluminum construction with durable precision TIG-welds
Showing 59905–59916 of 83665 results