0
6
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
6 Shopping Cart 3,078.67 $

Mishimoto 2019+ Ford Ranger 2.3L Intercooler Pipe & Boot Kit – Polished

The 2019-2023 Ford Ranger 2.3L EcoBoost is one of the most capable small trucks on the planet. With its direct-injected and turbocharged engine producing 310 lb-ft of torque, the 2019-2023 Ranger combines efficiency with capability. The 2.3L EcoBoost engine under the hood of the Ranger produces plenty of power to let you roam free, but what if you want more? Adding a tune and more boost is a great way to squeeze more power from the Ranger, but the stock intercooler pipes can only handle so much boost. That’s why Mishimoto has developed this aluminum intercooler pipe and boot kit for the 2019-2023 Ford Ranger 2.3L EcoBoost.Our all-aluminum intercooler pipes are constructed of mandrel-bent aluminum with a polished or micro-wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe, allowing for up to 25-percent better flow and dyno-proven max gains of 9.7 wheel horsepower and 9 lb-ft of torque when combined with Mishimoto intercooler pipes. The Mishimoto intercooler pipes are also larger than stock, with a 19.86-percent increase in volume to let your turbo breathe easy.This kit includes Mishimoto Silicone Boots with DuraCore(TM) technology. Mishimoto DuraCore technology is a synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to standard silicone, DuraCore(TM) provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto high-torque worm gear clamps for consistent holding power.Like all our Ranger products, this 2019-2023 Ford Ranger 2.3 EcoBoost Intercooler Pipe and Boot Kit is a direct fit and is backed by our Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.

  • Increases internal volume by 26.4-percent on the hot side and 13.7-percent on the cold side for more power potential
  • Improves flow by 25.6-percent on the hot side and 16.6-percent on the cold side
  • Dyno-proven max gains of 9.78 hp and 9 ft-lbs of torque

602.42 $

Out of stock
SKU MMICP-RGR-19KP
brand Mishimoto

Description

The 2019-2023 Ford Ranger 2.3L EcoBoost is one of the most capable small trucks on the planet. With its direct-injected and turbocharged engine producing 310 lb-ft of torque, the 2019-2023 Ranger combines efficiency with capability. The 2.3L EcoBoost engine under the hood of the Ranger produces plenty of power to let you roam free, but what if you want more? Adding a tune and more boost is a great way to squeeze more power from the Ranger, but the stock intercooler pipes can only handle so much boost. That’s why Mishimoto has developed this aluminum intercooler pipe and boot kit for the 2019-2023 Ford Ranger 2.3L EcoBoost.Our all-aluminum intercooler pipes are constructed of mandrel-bent aluminum with a polished or micro-wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe, allowing for up to 25-percent better flow and dyno-proven max gains of 9.7 wheel horsepower and 9 lb-ft of torque when combined with Mishimoto intercooler pipes. The Mishimoto intercooler pipes are also larger than stock, with a 19.86-percent increase in volume to let your turbo breathe easy.This kit includes Mishimoto Silicone Boots with DuraCore(TM) technology. Mishimoto DuraCore technology is a synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to standard silicone, DuraCore(TM) provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto high-torque worm gear clamps for consistent holding power.Like all our Ranger products, this 2019-2023 Ford Ranger 2.3 EcoBoost Intercooler Pipe and Boot Kit is a direct fit and is backed by our Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.

  • Increases internal volume by 26.4-percent on the hot side and 13.7-percent on the cold side for more power potential
  • Improves flow by 25.6-percent on the hot side and 16.6-percent on the cold side
  • Dyno-proven max gains of 9.78 hp and 9 ft-lbs of torque

Specification

Weight 5 kg
Dimensions 20 × 14 × 8 cm
air_freight_prohibited

false
not_carb_approved

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
carb_acknowledgement_required

true
clearance_item

t
regular_stock

false
units_per_sku

1
upc

811580039737
brand

Mishimoto
part_number

MMICP-RGR-19KP

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: MMICP-MK8-22WBK

    Mishimoto 22+ Volkswagen GTI MK8 (MQB) Intercooler Pipe Kit Black

    No Reviews

    Improve the flow of the charged air through your MK8 with the Mishimoto Intercooler Pipe Kit. The GTI has a long pedigreed history in the realm of hot-hatchbacks, especially when it comes to models powered with 4-cylinder turbo engines. The stock piping in Volkswagen’s star player, however, doesn’t quite live up to the hype. Full of bends, restrictive diameters, and constructed from degradation-prone materials, the stock charge pipes are a restriction for your MK8, especially when cranking up the boost.
    —-
    These pipes feature a robust, mandrel-bent aluminum construction and 5-layer, heat-resistant silicone couplers to ensure a sturdy and long-lasting connection to and from the intercooler. The 30.9% increase in airflow is thanks to a reduced amount of restrictive bends and an increase of piping diameter to 2.75”, meaning your turbo can breathe easier than ever.
    —-
    The Mishimoto MK8 Intercooler Pipe Kit is available in a polished or wrinkle black finish to suit the style of your MK8. We also stand behind the craftsmanship of our products which is why this piping kit also includes the Mishimoto Lifetime Warranty.
    Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.

    • 10% increase in average diameter over stock piping
    • 30.9% increase in flow over stock components
    • Fits stock and Mishimoto intercoolers
    570.93 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SES1116ICPWR

    Injen 15-16 BMW M3(F80)/M4 (F82/83) 3.0L L6 Twin Turbo 2PC Aluminum Int. Charge Pipe – Wrinkle Red

    No Reviews

    Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
    SES Intercooler Pipes, Part No. SES1116ICPWR, 2015-2018 BMW M3 L6-3.0L(tt) F80, 2015-2020 BMW M4 L6-3.0L(tt) F82/83, 2019-2020 BMW M2 COMPETITION L6-3.0L(tt) F87.
    BMW M3 (F80) 3.0L L6 Twin turbo S55 Intercooler charge pipes. Included two 1/8in. Female NPT bungs for water/meth injection or datalog sensors.Mandrel bentAluminum tubing with CNC machined turbo inlet flanges for O.E. fitment

    • This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
    • Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation
    • Manufactured from 2.25″Lightweight 6061-T6 Mandrel-Bent Aluminum Piping
    • Available in Polished, Wrinkle Black, or Wrinkle Red finishes
    • Beaded Tube Ends to Help Prevent Couplers from Coming Off
    • Fits specific applications equipped with the S55 engine
    • Stainless Steel Band Clamp with Inner Protective Liner
    • Increase Throttle Response and Decreases Turbo Lag
    • Unique Injen Logo Plate for a Refined Style
    • Injen Technology Limited Lifetime Warranty
    • Mandrel-bent Tubing for Increased Flow
    • Includes two TIG-Welded 1/8″NPT ports
    • Automotive Grade Silicone Couplers
    • Precision CNC machined flanges
    • Made in Pomona, California USA
    772.08 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: MMICP-F80-15

    Mishimoto 2015+ BMW F8X M3/M4 Charge Pipe Kit – Wrinkle Black

    No Reviews

    Keep the boost flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 Charge Pipe Kit. The air-to-water intercooler keeping IAT?s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, It’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55?s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and OEM styled connection to the air-to-water intercooler. The Mishimoto 2015+ BMW F8X M3/M4 Performance Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation.
    Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.

    • Unique cast midsection for perfect fitment between engine and air intake
    • Full aluminum TIG-welded construction for maximum durability
    • Includes bung for simple integration of methenol injection
    492.88 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SES1116ICPWB

    Injen 15-16 BMW M3(F80)/M4 (F82/83) 3.0L L6 Twin Turbo 2PC Aluminum Int. Charge Pipe – Wrinkle Black

    No Reviews

    Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
    SES Intercooler Pipes, Part No. SES1116ICPWB, 2015-2018 BMW M3 L6-3.0L(tt) F80, 2015-2020 BMW M4 L6-3.0L(tt) F82/83, 2019-2020 BMW M2 COMPETITION L6-3.0L(tt) F87.
    BMW M3 (F80) 3.0L L6 Twin turbo S55 Intercooler charge pipes. Included two 1/8in. Female NPT bungs for water/meth injection or datalog sensors.Mandrel bentAluminum tubing with CNC machined turbo inlet flanges for O.E. fitment

    • This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
    • Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation
    • Manufactured from 2.25″Lightweight 6061-T6 Mandrel-Bent Aluminum Piping
    • Available in Polished, Wrinkle Black, or Wrinkle Red finishes
    • Beaded Tube Ends to Help Prevent Couplers from Coming Off
    • Fits specific applications equipped with the S55 engine
    • Stainless Steel Band Clamp with Inner Protective Liner
    • Increase Throttle Response and Decreases Turbo Lag
    • Unique Injen Logo Plate for a Refined Style
    • Injen Technology Limited Lifetime Warranty
    • Mandrel-bent Tubing for Increased Flow
    • Includes two TIG-Welded 1/8″NPT ports
    • Automotive Grade Silicone Couplers
    • Precision CNC machined flanges
    • Made in Pomona, California USA
    772.08 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 6 Cart Garage
support@ucperformance.com