-
Upgrade the front or rear non-adjustable factory trailing arms on your Porsche 996 and 997 with this pair of fully adjustable arms from SPC Performance. Constructed from forged 6061-T6 aluminum with a hard black anodize finish, they adjust with an easy to reach threaded adjuster and maintain factory ride with SPC’s xAxis sealed flex joints which eliminate binding and bushing compliance. When you install these links on the front, you will be able to adjust caster +-1.25deg. SPC has maintained the OE form sothat you will be able to reuse your factory air deflector without modification. When you install these arms on the rear you will be able to adjust set-back +-1/2 inch (+-13mm). Designed for street use as well as the rigors of the track, these arms will letyou put your alignment angles where you want them for the way you drive. Need camber adjustment? Consider SPC’s adjustable camber arms, PN# 72610. These SPC arms are designed to work together to make your suspension fully adjustable. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. -
Adjust toe +-3deg with this pair of adjustable toe links. SPC’s forged aluminum construction avoids any weight penalty while maintaining factory strength. The integrated ball joint means smooth bind free articulation and no maintenance required. Sold as pairs. Need more adjustment options? Consider our camber arms, SPC PN 72610, and our caster/setback arms, SPC PN 72630. These are also available as a complete performance package: see SPC PN 72600. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. -
Get ready for the track with this four (4) arm set of adjustable upper links for the Audi C6 and D3 platforms. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis sealed flex joints replace the compliant inner bushings with a free pivoting, minimum compliance, joint. You will feel the difference in handling. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance, joint Don’t need the added benefits of our performance arms? Use SPC arm with OE type bushings – part #81373 for two sets of arms to correct both sides of the vehicle, #81371 for the left side, or part #81372 for the right. Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Kit includes both arms for both sides of the vehicle, order one kit per vehicle
- xAxis racing style sealed flex joints for reactive handling
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Comes with pinch bolt hardware
-
Extend total toe cahnge on many Scion, Lexus, and Toyota models with SPC’s replacement rear toe adjustment arm. Many of these mondels come with factory adjustment but need more due to factory recalls, lowering, or collision repair. SPC’s remove & replace rear link provides +-3.0deg of toe change. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. -
Designed, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #25440 or #25435 depending on year. Sold as pairs. US Patent No. 7,513,514.
Adjustable front upper control arms for the 4th & 5th Generation 4Runner, FJ Cruiser, and Lexus GX with forged steel connstruction, sealed modern architecture ball joints, and xAxis™ seald flex joint joints in bonded rubber bushings
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- New ball joint has 25% larger stud cross section than OE for superior strength & E-Nickel coating for superior corrosion protection while providing 80° of articulation & extended threads make these arms compatible with knuckle gusset kits
- Arm’s adjustment range combine with OE adjusters corrects alignment angles for improved drivability and reduced tire wear & makes it possible to move the tire forward to maximize clearance for 33’s without frame or fender modifications
- One piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation & low turning torque for reduced wear and extended life that tests like OE
- New xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel & superior noise vibration and harshness (NVH) characteristics
- Forged steel arm construction provides maximum strength & clearance with additional caster provision for lifted vehicles built-in
- New fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint
- Front Adjustment Range: Camber ±2.00° / Caster 0.00° to +4.00°
- Required: 1 per axle
- Sold as a pair
-
Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms on many Toyota trucks and SUVs. Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC’s integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications. Get more droop travel: SPC’s arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80deg of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +1deg of caster built into them. Using its patented ball joint design the arm will get you 0deg to +4deg of caster and +-2deg of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need replacement cams for the lower control arm? Check out SPCp/n 25445, which will replace corroded cam bolt assemblies. * On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray finish for the best corrosion protection available. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- SPC Adjustable Front Upper Control Arms are the industry standard in off-road and racing applications
- Patented design for extra camber and caster adjustment
- SPC ball joints are oversized and provide 80 of travel
-
This pair of rear lower control arms are direct replacements for weak or bent factory units. Made of 3/16″ wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise and xAxis joints in the opposite end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for offroad use, these are the arms for you. Need articulation or alignment changes in the front? Check out the 25455 front adjustable upper control arms! California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Increasesarticulationwith xAxis sealed flex joint.
- 3/16′ wall DOM steel tube construction
- Direct replacement for OE arms
- 2x stronger than the OEM arms
-
This pair of rear lower control arms are direct replacements for weak or bent factory units. Made of 3/16″ wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of road noise and xAxis sealed flex joints in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for offroad use, these are the arms for you. Need articulation or alignment changes in the front? Check out the 25480 front adjustable upper control arms! California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Increasesarticulationwith xAxis sealed flex joint.
- 3/16′ wall DOM steel tube construction
- Direct replacement for OE arms
- 2x stronger than the OEM arms
-
Designed, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #25440 or #25435 depending on year. Sold as pairs. US Patent No. 7,513,514.
Adjustable front upper control arms for the 2nd & 3rd Generation Tacoma with forged steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- New ball joint has 25% larger stud cross section than OE for superior strength & E-Nickel coating for superior corrosion protection while providing 80° of articulation & extended threads make these arms compatible with knuckle gusset kits
- Arm’s adjustment range combine with OE adjusters corrects alignment angles for improved drivability and reduced tire wear & makes it possible to move the tire forward to maximize clearance for 33’s without frame or fender modifications
- One piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation & low turning torque for reduced wear and extended life that tests like OE
- New xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel & superior noise vibration and harshness (NVH) characteristics
- Forged steel arm construction provides maximum strength & clearance with additional caster provision for lifted vehicles built-in
- New fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint
- Front Adjustment Range: Camber ±2.00° / Caster 0.00° to +4.00°
- Required: 1 per axle
- Sold as a pair
-
Designed, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #25450. Sold as pairs. US Patent No. 7,513,514.
Adjustable front upper control arms for the Toyota Tundra and Sequoia with forged steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Arm’s adjustability combine with OE adjusters corrects alignment angles for improved drivability and reduced tire wear & makes it possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications
- Ball joint’s one piece polymer race with modern grease formula ensures quiet smooth operation & low turning torque for reduced wear and extended life that tests like OE
- New ball joint has 25% larger stud cross section than OE for superior strength & E-Nickel coating for superior corrosion protection while providing 80° of articulation
- New xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel & superior noise vibration and harshness (NVH) characteristics
- Forged steel arm construction provides maximum strength & clearance with additional caster provision for lifted vehicles built-in
- New fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint
- Front Adjustment Range: Camber ±2.00° / Caster 0.00° to +4.00°
- Required: 1 per axle
- Sold as a pair
-
Spec 00-03 Audi TT 1.8L Stage 2 Clutch Kit
-
Spec 00-03 BMW M5 5.0L SS-Trim Twin Disc Clutch Kit
Showing 32425–32436 of 36755 results