0
6
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
6 Shopping Cart 4,808.67 $

SPC Performance Toyota Light Truck UCA

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms on many Toyota trucks and SUVs. Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC’s integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications. Get more droop travel: SPC’s arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80deg of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +1deg of caster built into them. Using its patented ball joint design the arm will get you 0deg to +4deg of caster and +-2deg of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need replacement cams for the lower control arm? Check out SPCp/n 25445, which will replace corroded cam bolt assemblies. * On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray finish for the best corrosion protection available. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

  • SPC Adjustable Front Upper Control Arms are the industry standard in off-road and racing applications
  • Patented design for extra camber and caster adjustment
  • SPC ball joints are oversized and provide 80 of travel

1,226.84 $

SKU 25485
brand SPC Performance
Add to wishlist Add to compare

Description

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms on many Toyota trucks and SUVs. Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC’s integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications. Get more droop travel: SPC’s arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80deg of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +1deg of caster built into them. Using its patented ball joint design the arm will get you 0deg to +4deg of caster and +-2deg of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need replacement cams for the lower control arm? Check out SPCp/n 25445, which will replace corroded cam bolt assemblies. * On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray finish for the best corrosion protection available. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

  • SPC Adjustable Front Upper Control Arms are the industry standard in off-road and racing applications
  • Patented design for extra camber and caster adjustment
  • SPC ball joints are oversized and provide 80 of travel

Specification

Weight 21.5 kg
Dimensions 14.5 × 14.3 × 5 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

t
units_per_sku

1
upc

082642254850
brand

SPC Performance
part_number

25485

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 81383

    SPC Performance Audi B9 Front Upper Control Arm Set Left & Right Pair

    No Reviews

    Adjust front camber and caster +-1.5deg on the Audi B9 platform with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. For the left hand (LH) side, use #81381. For the right hand (RH) side, use part number #81382. Want to be able to adjust both sides? Use part #81383. Forged 6061-T6 Aluminum construction for maximized strength at minimum weight OE style, maintenance free, bootedball joints Large 18mm threaded adjuster links Replacement pinch bolts included California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • Kit includes both arms for both sides of the vehicle, order one kit per vehicle
    • OE style bushing and ball joint maintain factory feel and noise reduction
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Comes with pinch bolt hardware
    1,232.27 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 81373

    SPC Performance Audi and VW Adjustable Control Arm Kit

    No Reviews

    Adjust front camber and caster +-1.5deg on the Audi C6 and D3 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes four arms to replace both upper links on both sides of the vehicle. For the left hand (LH) side, use #81371. For the right hand (RH) side, use part number #81372. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • Kit includes both arms for both sides of the vehicle, order one kit per vehicle
    • OE style bushing and ball joint maintain factory feel and noise reduction
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Comes with pinch bolt hardware
    1,232.27 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 81371

    SPC Performance Audi and VW Rear Adjustable Control Arm – Left

    No Reviews

    Adjust front camber and caster +-1.5deg on the Audi C6 and D3 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, and harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the left hand (LH) side. For the right hand (RH) side, use part number #81372. Want to be able to adjust both sides? Use part number #81373. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joints boots on these arms? We have replacement kit available! Part No. 81354. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • OE style bushing and ball joint maintain factory feel and noise reduction
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Kit includes both arms for the LEFT side only
    • Comes with pinch bolt hardware
    616.13 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 6 Cart Garage
support@ucperformance.com