Shop

Injen is proud to be introducing the all new Evolution sealed cold air intake system for the 2015-2020 BMW M3/M4 ans 2019-2021 M2 Compeition! This intake has been designed using the some of the most up-to-date engineering tools and techniques to produce a top notch kit. This intake system is on a whole new level with one-piece sealed housings that utilize the all new Injen Twist-lock System (Patent Pending) to securely attach the Injen SuperNano-Web Dry air filters in place. This cold air intake also has our distinctive sight window that not only allows easy inspection of the air filters, but it really pops under your hood too. This kit ships complete with premium hardware to provide you the absolute best intake kit available for your BMW M3 and M4.
EVOLUTION Cold Air Intake System, Part No. EVO1102, 2015-2018 BMW M3 L6-3.0L Twin Turbo (F80), 2015-2020 BMW M4 L6-3.0L Twin Turbo (F82/83), 2019-2021 BMW M2 Competition L6-3.0L Twin Turbo (F87).
BMW 2015-16 M3 (F80) 3.0L Twin Turbo L6 S55Durable rotomolded polyethylene one piece dual enclosed air box with tube; comes with a patented SuperNano-Web dry filter that twist locks into the air box for an air tight seal; the housing includes a Black Badge.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
• Twist-Lock Technology to securely integrate the air filter to the housing
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 22 hp and 27 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene tubes and housings
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Larger Inlet Air Scoop And Induction Tube
• Replacement air filter # X-1097-BB
• Made in Pomona, California USA
• Patent Pending

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Short Ram Air Intake System; Incl. Tubing/Filter/Heat Shield/Hardware/Instruction; w/MR Technology; HP Gains +11.0 HP/Torque Gains +10.0 ft. lbs.; Black;
Lexus 2015-2017 RC350 3.5L V6Tuned air intake system w/MR Tech.;heat shield and SuperNano-Web dry filter HCT-No CARB

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 11 hp and 10 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1034BLK or 1034RED
• Features Injen’s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Features Injen’s patented Air Fusion Technology
• Replacement air filter part number X-1015-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque up to 10 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona California, USA
• No additional tuning required
• Short Ram Air Intake Design

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Short Ram Air Intake System; Incl. Tubing/Filter/Heat Shield/Hardware/Instruction; w/MR Technology; HP Gains +11.0 HP/Torque Gains +10.0 ft. lbs.; Polished;
Lexus 2015-2017 RC350 3.5L V6Tuned air intake system w/MR Tech.;heat shield and SuperNano-Web dry filter HCT-No CARB

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 11 hp and 10 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1034BLK or 1034RED
• Features Injen’s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Features Injen’s patented Air Fusion Technology
• Replacement air filter part number X-1015-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque up to 10 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona California, USA
• No additional tuning required
• Short Ram Air Intake Design

Roto-molded Housing: The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO1200 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Front Mounted Ram Air Scoop: SuperNano-Web Dry Air Filter: “OMG that’s massive!”is all you will hear about this SuperNano-Web Dry air filter that is included in the EVO1200. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock system has allowed our engineers to use the largest filter possible for this application, which increases the available air volume – resulting in added power while keeping the installation process quick and simple. Quality Hardware: Stainless steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit and easy installation. Hassle-Free Installation: Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today.Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a top-notch kit. After hours of designing and dyno testing, Injen is proud to say that the EVO1200 Evolution Air Intake system puts down numbers of up to 7 additional horsepower and 8 lb-ft. of torque.
EVOLUTION Cold Air Intake System, Part No. EVO1200, 2015-2020 Subaru WRX H4-2.0L Turbo.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Patented Twist-Lock Air Filter used to securely integrate the air filter to the housing
• Injen Clear-Vue Window allows you to check the condition of your air filter easily
• Ram air scoop is designed to capture the largest amount of cool air
• Aggressive under hood appearance while maintaining an OE fit
• Stainless steel band clamps with inner protective liner
• Dyno Proven gains of up to 7 hp and 8 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene construction
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1112-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California, USA

The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance Cold Air Intake system to develop some serious bolt-on power. The soul of this Cold Air Intake system is with our smooth, mandrel-bent, over-sized 3.00″ O.D. T6-6061 aluminum tube that provides a smooth, uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! This intake system also features our patented MR (Mega Ram) Technology at the MAF for precise control over the fuel trims with no fear of check engine lights or additional electronic tuning.
SP Aluminum Series Short Ram Air Intake System, Part No. SP1209P, 2015-2021 Subaru WRX H4-2.0L (t)

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Impressive under hood appearance while maintaining an OE fit
• Fully Incorporated Application-Specific Heatshield included
• Optional X-Pedal Throttle Response Controller: P/N PT0002B
• Dyno Proven gains of up to 24 hp and 20 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Innovative Design allows for maximum airflow and power
• Fully serviceable Injen SuperNano-Web dry air filter
• 3.00in Mandrel-bent 6061-T6 aluminum intake tubing
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1078-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional Hydroshield part number 1120BLK
• Made in Pomona, California, USA

The all-new EVO9205 Evolution cold air intake system by Injen Technology is the next generation of performance intake systems for the 2015-2023 Ford Mustang with the 2.3L EcoBoost engine. Every EVO9205 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS.
EVOLUTION Cold Air Intake System, Part No. EVO9205, 2015-2023 Ford Mustang L4-2.3L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
• Large forward-facing inlet to maximize incoming cool air from behind the grille
• No Tune Required – Designed to work seamless with the stock calibration
• Intake tube features Injen’s patented internal MegaRam (MR) Technology
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 23 hp and 21 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1107-BB
• Made in Pomona California, USA

Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen?s cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!
PF Cold Air Intake System, Part No. PF9032RRB, 2015-2025 Ford F-150 V6-3.5L Twin Turbo, 2017-2025 Ford F-150 Raptor V6-3.5L Twin Turbo.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Equal length and diameter tubes with 3.5″ dual air inlets that feed more air to your turbos
• This cutting edge design is meticulously engineered using advanced CAD and CFD technology
• NO external devices are needed to equalize the pressure. CEL’s are a thing of the past!
• The massive intake collector equalizes air for less restriction and improved flow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Includes custom heat shield specifically designed for this application
• Manufactured with high strength, Cross-Link Polyethylene tubing
• Dyno Proven gains of up to 12 hp and 24 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Available with multiple finish options
• Does NOT fit hybrid equipped models
• Made in Pomona California, USA

Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen?s cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!
PF Cold Air Intake System, Part No. PF9032RG, 2015-2025 Ford F-150 V6-3.5L Twin Turbo, 2017-2025 Ford F-150 Raptor V6-3.5L Twin Turbo.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Equal length and diameter tubes with 3.5″ dual air inlets that feed more air to your turbos
• This cutting edge design is meticulously engineered using advanced CAD and CFD technology
• NO external devices are needed to equalize the pressure. CEL’s are a thing of the past!
• The massive intake collector equalizes air for less restriction and improved flow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Includes custom heat shield specifically designed for this application
• Manufactured with high strength, Cross-Link Polyethylene tubing
• Dyno Proven gains of up to 12 hp and 24 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Available with multiple finish options
• Does NOT fit hybrid equipped models
• Made in Pomona California, USA

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
SP Short Ram Intake System, Part No. SP2097BLK, 2016-2017 Lexus IS200T L4-2.0L Turbo, 2016-2017 Lexus RC200T L4-2.0L Turbo, 2018-2020 Lexus IS300 L4-2.0L Turbo.
Hydro Carbon Trap. No CARB E.O. For Off Road Use Only
Lexus 2016-2017 IS200T 2.0L 4 cyl. TurboTuned air intake systemwith MR Technology ; comes w/heat shield and SuperNano-Web dry filter HCT-No CARB

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 15 hp and 14 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Features Injen’s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Features Injen’s patented Air Fusion Technology
• Replacement air filter part number X-1063-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 14 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
SP Short Ram Intake System, Part No. SP2097P, 2016-2017 Lexus IS200T L4-2.0L Turbo, 2016-2017 Lexus RC200T L4-2.0L Turbo, 2018-2020 Lexus IS300 L4-2.0L Turbo.
Hydro Carbon Trap. No CARB E.O. For Off Road Use Only
Lexus 2016-2017 IS200T 2.0L 4 cyl. TurboTuned air intake systemwith MR Technology ; comes w/heat shield and SuperNano-Web dry filter HCT-No CARB

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 15 hp and 14 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Features Injen’s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Features Injen’s patented Air Fusion Technology
• Replacement air filter part number X-1063-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 14 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design