0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

Injen 15-20 Subaru STI Cat Back Exhaust w/ Quad Titanium Tips

The Injen Performance Cat-Back Exhaust System for the 2015-2021 Subaru WRX and WRX STI was designed from the ground up to compliment the aggressive styling and blistering performance of these sporty sedans. Our custom dual muffler design hones the tone of the engine into an ear-pleasing symphony. Purposefully delivering a crisp, clean, deep rumble at idle and an aggressive roar when you’re pushing the limits. Manufactured from only the highest grade 304 stainless-steel, from the flanges to quad titanium look tips, for the highest level of tensile strength and rust resistance. The premium polished finish on the mufflers is sure to impress anyone curious enough to peek at the undercarriage and the burnt titanium look exhaust tips offer superb aesthetics that perfectly compliment the sound of the system itself.
Performance Exhaust System, Part No. SES1207TT, 2015-2021 Subaru WRX H4-2.0L / 2015-2021 Subaru WRX STI H4-2.5L

  • This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles.
  • Custom investment cast Y-Pipe equalizes flow for improved performance and sound
  • Dyno Proven power increase of 13 HP and 11 Lb.-Ft. of torque at the wheels
  • Dual Oval, straight-through mufflers for exceptional sound and performance
  • Exhaust Tips are bolt-on and allow for a staggered or straight install
  • Hand Crafted and TIG Welded to Perfection for Strength and Durability
  • Stainless Steel Investment Cast Flanges for a Fast and Easy Install
  • Beautiful V-Band clamps used for a simple, leak-free installation
  • Performance Stepped Pipe design utilizing 76MM and 60MM piping
  • Manufactured from Mandrel-Bent 304 Stainless Steel
  • Show Quality Embossed Stainless-Steel Muffler
  • Premium Stainless-Steel Hardware and Hangers
  • 3.250? Burnt Titanium look, Quad-Tip design
  • Designed and Manufactured in Pomona, CA
  • Emissions:

2,092.17 $

SKU SES1207TT
brand Injen
Add to wishlist Add to compare

Description

The Injen Performance Cat-Back Exhaust System for the 2015-2021 Subaru WRX and WRX STI was designed from the ground up to compliment the aggressive styling and blistering performance of these sporty sedans. Our custom dual muffler design hones the tone of the engine into an ear-pleasing symphony. Purposefully delivering a crisp, clean, deep rumble at idle and an aggressive roar when you’re pushing the limits. Manufactured from only the highest grade 304 stainless-steel, from the flanges to quad titanium look tips, for the highest level of tensile strength and rust resistance. The premium polished finish on the mufflers is sure to impress anyone curious enough to peek at the undercarriage and the burnt titanium look exhaust tips offer superb aesthetics that perfectly compliment the sound of the system itself.
Performance Exhaust System, Part No. SES1207TT, 2015-2021 Subaru WRX H4-2.0L / 2015-2021 Subaru WRX STI H4-2.5L

  • This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles.
  • Custom investment cast Y-Pipe equalizes flow for improved performance and sound
  • Dyno Proven power increase of 13 HP and 11 Lb.-Ft. of torque at the wheels
  • Dual Oval, straight-through mufflers for exceptional sound and performance
  • Exhaust Tips are bolt-on and allow for a staggered or straight install
  • Hand Crafted and TIG Welded to Perfection for Strength and Durability
  • Stainless Steel Investment Cast Flanges for a Fast and Easy Install
  • Beautiful V-Band clamps used for a simple, leak-free installation
  • Performance Stepped Pipe design utilizing 76MM and 60MM piping
  • Manufactured from Mandrel-Bent 304 Stainless Steel
  • Show Quality Embossed Stainless-Steel Muffler
  • Premium Stainless-Steel Hardware and Hangers
  • 3.250? Burnt Titanium look, Quad-Tip design
  • Designed and Manufactured in Pomona, CA
  • Emissions:

Specification

Weight 60.8 kg
Dimensions 57.5 × 19.2 × 13.6 cm
air_freight_prohibited

false
not_carb_approved

false
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

false
clearance_item

t
units_per_sku

1
upc

843115028930
brand

Injen
part_number

SES1207TT

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 3015-23036

    AWE Tuning BMW F30 320i Touring Exhaust w/Performance Mid Pipe – Diamond Black Tip (90mm)

    No Reviews

    AWE has tapped over two decades of experience in performance engineering to produce the ultimate exhaust for the The Ultimate Driving Machine®. Hundreds of hours of prototyping, engineering, research, testing, and daily usage evaluation has culminated in the AWE BMW F30 320i Exhaust Suite: The Options The AWE F30 BMW 320i Exhaust System is a downpipe back system that leverages an integrated 3” Resonated Performance Mid Pipe, and a 180 Technology® equipped Axleback section. When combined, these two components produce the perfect exhaust note, drone free. Important notes:All products are confirmed to fit both RWD and X Drive vehicles.
    AWE Touring Edition Exhaust + Performance Mid Pipe for BMW F30 320i, Single Side – Diamond Black Tip (90mm)

    • Engineered, designed and manufactured in-house at AWE
    • Max gains of 9hp and 8lb-ft of torque at the crank
    • Resonated Performance Mid Pipe within full system
    • Featuring the AWE Lifetime Exhaust Warranty
    • Crafted from T304L stainless steel
    • No Check Engine Light – Guaranteed
    • Full 3” CNC mandrel bent system
    • Featuring AWE 180 Technology®
    • Perfect Fitment – Guaranteed
    • Dual walled AWE branded tip
    1,691.09 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 3025-42062

    AWE Tuning 18-19 BMW M5 (F90) 4.4T AWD SwitchPath Cat-back Exhaust – Chrome Silver Tips

    No Reviews

    The SwitchPath™ Cat Back Exhaust features dual 3” CNC mandrel-bent .065” wall T304L stainless steel tubing from downpipes to tip outlets with a precision-engineered X-pipe in between. Equipped with valved rear sections, the SwitchPath™ Cat Back retains all of the M5’s valve behavior when changing driving modes and/or using the exhaust button found on the console. The AWE Performance Mid Pipes replace the factory mid section with a 3” stainless steel X-pipe, and are included in the Cat Back SwitchPath™ configuration. All tip options are 4″, slash-cut, and include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.
    AWE SwitchPath™ Catback Exhaust for BMW F90 M5 – Chrome Silver Tips

    • Peak gains of 4 hp and 4 lb-ft of torque, max gains of 22 hp and 18 lb-ft of torque, at the wheels
    • Handcrafted from dual 3” U.S.-sourced CNC mandrel-bent .065” wall T304L stainless steel
    • 17 lb weight savings with the SwitchPath™ Cat Back Exhaust
    • Designed, engineered, and manufactured in-house at AWE
    • Less is more: clean, straight-through design
    • Pure bolt-on for factory-like simplicity
    • AWE No Check Engine Light Guarantee
    • Precision-engineered x-pipe
    • Perfect fitment, guaranteed
    • Lifetime Warranty
    4,525.54 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 49-36344-B

    aFe MACH ForceXP 2.5 IN 304 Stainless Steel Cat-Back Exhaust System w/ Black Tips 01-06 BMW M3 (E46)

    No Reviews

    Unleash power and sound while improving the looks on your M3 Coupe with this MACH Force-Xp cat back system by aFe POWER. The larger diameter, mandrel-bent tubing along with high-flow stainless steel mufflers optimize the sound and looks of your vehicle. This 100% hand TIG-welded system offers proven the quality and durability found in aFe POWER products, and is finished off with four massive 3″ stainless steel exhaust tips with laser-etched logos.
    MACH Force-XP 2-1/2 IN 304 Stainless Steel Cat-Back Exhaust System w/ Black Tips BMW M3 (E46) 01-06 L6-3.2L S54

    • 2-1/2″ Mandrel-Bent 304 Stainless Steel Tubing for Improved Performance and Rust-Resistant Finish
    • X-Pipe Balance Tube Helps Minimize Drone While Increasing Performance
    • 100% Hand TIG-Welded for Race Proven Strength and Durability
    • Quad, Rear-Exit 3″, Angle-Cut, Stainless Steel Exhaust Tips
    • Dual High Flow Mufflers Deliver an Aggressive Sound
    2,535.94 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com