Shop

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.
Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.
Perfect Choice for 5.7L stock bottom end and 2.5L or smaller blowers. Excellent throttle response and great power. (Req DOD Delete & 26918 Springs
See 112-337-11 for Stage 2, Turbo options available under 112-330-11 and 112-332-11
Dodge 5.7/6.1L HEMI Engines w/o VVT

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.
Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.
Perfect Choice for 5.7L Eagle or 6.4L Apache with 2.5L and smaller blowers while keeping limited phaser control for off idle response. (Req DOD Delete, 26918 Springs & Phaser Limiter)
See 201-337-11 for Stage 2, Turbo options available under 201-330-11 and 201-332-11
Dodge 5.7L /6.4L HEMI Engines w/ VVT

Excellent performance with smaller engines or any 5.3L mildly modified blower engine.
Perfect choice for 5.3L “cam only” and mildly modified blower engines. Low Shock profiles allow 7200 RPM stability with package
Available in CK-Kit under CK54-335-11, Available in MK-Kit w/ 24X Timing Set under MK54-335-24, Available in MK-Kit w/ 58X Timing Set under MK54-335-58

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.
Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.
Best camshaft for larger blowers and more race oriented builds. Dyno tested to 7500+ RPM (Req DOD delete & 7228 springs)
See 112-335-11 for Stage 1, Turbo options available under 112-330-11 and 112-332-11
Dodge 5.7/6.1L HEMI Engines w/o VVT

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.
Best camshaft for larger blowers and more race oriented builds. Dyno tested to 7500+ RPM. (Req DOD delete, 7230 springs & Phaser LOCK)
Stage 1 available under CK201-335-11

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.
Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.
Perfect Choice for 5.7L stock bottom end with responsive street type turbo systems. Excellent throttle response and great power. (Req DOD Delete & 26918 Springs)
See 112-332-11 for Stage 2 Turbo, Blower options available under 112-335-11 and 112-337-11
Dodge 5.7/6.1L HEMI Engines w/o VVT

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.
Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.
Perfect Choice for 5.7L Eagle or 6.4L Apache with responsive, street type turbo systems and keeping limited phaser control for off idle response. (Req DOD Delete, 26918 Springs & Phaser Limiter)
See 201-332-11 for Stage 2 Turbo, Blower options available under 201-335-11 and 201-337-11
Dodge 5.7L /6.4L HEMI Engines w/ VVT

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.
Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.
Best camshaft for larger turbochargers with optimized low backpressure hot side. Dyno tested to 7500+ RPM. (Req DOD delete, 7228 springs & Phaser LOCK)
See 112-330-11 for Stage 1 Turbo, Blower options available under 112-335-11 and 112-337-11
Dodge 5.7/6.1L HEMI Engines w/o VVT

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.
Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.
Best camshaft for larger turbochargers with optimized low backpressure hot side. Dyno tested to 7500+ RPM. (Req DOD delete, 7230 springs & Phaser LOCK)
See 201-330-11 for Stage 1 Turbo, Blower options available under 201-335-11 and 201-337-11
Dodge 5.7L /6.4L HEMI Engines w/ VVT

For the racer in all of us. Depending on idle speed, idle sound may indicate this is a non‐factory camshaft. Good HP gain over O.E. cam.
Stage 1 available under 08-696-11
Fits ’87+ GEN 1 Chevrolet 305-350 Small Blocks w/ Factory Roller Camshafts (Not LT-1/LS1 etc)