-
Injen’s all new Evolution series sealed cold air intake system for the 2015-2019 Chevrolet Corvette Z06 is unmatched in the aftermarket. The EVO7203 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. The EVO7203 housing encloses an Injen SuperNano-Web dry air filter to provide killer air flow, added performance, and outstanding engine protection. The EVO7203 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box. Roto-molded Housing; The EVO7203 housing encloses an Injen SuperNano-Web dry air filter to provide killer air flow, added performance, and outstanding engine protection. Roto-molded Intake Tube; The EVO7203 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights, ,
Evolution Series Air Induction System; Incl. Roto-Molded Housing And Intake Tube/SuperNano-Web Dry Filter/Hardware; HP Gains +32 HP/Torque Gains +30 ft./lbs. ;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Aggressive underHood appearance while maintaining an OE fit
- Dyno Proven gains of up to 32 hp and 30 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1129-BB
- Designed to work with the stock calibration
- Stainless Steel Hardware/Clamps And Screws
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
-
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Intercooler Pipe Kit; Incl. 2 Piece Intercooler Pipes/Hoses/Clamps/Hardware; HP Gains +10.0 HP/Torque Gains +10.0 ft. lbs.; Polished;
Ford 2015-2017 Mustdang Ecoboost 2.3L 4 cyl. Turbo Intercooler charge pipes. 100% bolt onto factory intercooler or Injen FM9200i Front mount intercooler. Included one 1/8in. Female NPT bung for water/meth injection or datalog sensors.Mandrel bentAluminum tubing with CNC machined blow off valve flange. (Intercooler not included)- Available in Polished, Wrinkle Black, and Wrinkle Red finishes
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Includes All Necessary Hardware For Hassle-Free installation
- Manufactured from 2.75? Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime Warrantyty
- Unique Injen Logo Plate for a Refined Style
- Includes one TIG-Welded 1/8? NPT fitting
- Mandrel-bent Tubing for Increased Flow
- Includes both hot and cold side pipes
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Made in Pomona California, USA
-
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Intercooler Pipe Kit; Incl. 2 Piece Intercooler Pipes/Hoses/Clamps/Hardware; HP Gains +10.0 HP/Torque Gains +10.0 ft. lbs.; Wrinkle Red;
Ford 2015-2017 Mustdang Ecoboost 2.3L 4 cyl. Turbo Intercooler charge pipes. 100% bolt onto factory intercooler or Injen FM9200i Front mount intercooler. Included one 1/8in. Female NPT bung for water/meth injection or datalog sensors.Mandrel bentAluminum tubing with CNC machined blow off valve flange. (Intercooler not included)- Available in Polished, Wrinkle Black, and Wrinkle Red finishes
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Includes All Necessary Hardware For Hassle-Free installation
- Manufactured from 2.75? Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime Warrantyty
- Unique Injen Logo Plate for a Refined Style
- Includes one TIG-Welded 1/8? NPT fitting
- Mandrel-bent Tubing for Increased Flow
- Includes both hot and cold side pipes
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Made in Pomona California, USA
-
The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9203 is specifically engineered for the 2015-2019 Ford Mustang with the 2.3L EcoBoost engine. Every EVO9203 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9203 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9203 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth rotational molded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen’s proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25″deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9203 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can’t be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9203 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation ? this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry turbos! , ,
Evolution Series Air Induction System; Incl. Roto-Molded Housing W/Boost Plenum And Intake Tube/SuperNano-Web Dry Filter/Hardware; HP Gains +21 HP/Torque Gains +21 ft./lbs. ;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Aggressive underHood appearance while maintaining an OE fit
- Dyno Proven gains of up to 15 hp and 16 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1130-BB
- Designed to work with the stock calibration
- Stainless Steel Hardware/Clamps And Screws
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
- forward facing ram air scoop
- Fully functioning
-
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; HP Gains +13.51 HP/Torque Gains +16.15 ft. lbs.; Black;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 14 hp and 16 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1034BLK or 1034RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1015-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Increased Torque Up To 16.11 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
-
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Intercooler Pipe Kit; For Use w/OE Intercooler; Incl. Hot/Cold Side Pipes/High-Flow Turbo Muffler Delete Pipe/Clamps/Couplers; 6061-T1 Aluminum; Polished;
Intercooler not included- Includes fully machined high-flow aluminum turbo muffler delete
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Manufactured from 2.50? Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Available in Polished, Black, and Wrinkle Red finishes
- Stainless Steel Band Clamp with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Includes hot and cold side intercooler piping
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Mandrel-bent Tubing for Increased Flow
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Includes one 1/8? Female NPT bung
- Made in Pomona California, USA
- For use with OE Intercooler
-
Give your Audi S3, Audi TTS Quattro or Volkswagen Golf-R that added punch you crave with the EVO3005 Evolution Cold Air Intake System by Injen Technology. The EVO3005 is specifically engineered for the 2015-2020 Audi S3, 2016-2023 Audi TTS Quattro and the 2015-2021 Volkswagen Golf-R with the 2.0L Turbo engine and features a fully integrated and functional front ram air system with dual inlets. Unlike the factory scoop that some “performance” companies retain, the Injen EVO3005 has a redesigned ram air section that utilizes booth inlets for maximum airflow. Every EVO3005 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!
Evolution Series Air Induction System; Incl. Roto-Molded Housing W/Integrated Ram Air Scoop And Intake Tube/SuperNano-Web Dry Filter; HP Gains +15 HP/Torque Gains +16 ft./lbs. ;- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop is designed to capture the largest amount of cool air
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 15 hp and 16 lb-ft. of torque
- Durable Roto-Molded Polyethylene housing and intake tube
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1128-BB
- Designed to work with the stock calibration
- Stainless Steel Hardware/Clamps And Screws
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
-
Injen is proud to be introducing the all new Evolution sealed cold air intake system for the 2015-2020 BMW M3/M4 ans 2019-2021 M2 Compeition! This intake has been designed using the some of the most up-to-date engineering tools and techniques to produce a top notch kit. This intake system is on a whole new level with one-piece sealed housings that utilize the all new Injen Twist-lock System (Patent Pending) to securely attach the Injen SuperNano-Web Dry air filters in place. This cold air intake also has our distinctive sight window that not only allows easy inspection of the air filters, but it really pops under your hood too. This kit ships complete with premium hardware to provide you the absolute best intake kit available for your BMW M3 and M4.
EVOLUTION Cold Air Intake System, Part No. EVO1102, 2015-2018 BMW M3 L6-3.0L Twin Turbo (F80), 2015-2020 BMW M4 L6-3.0L Twin Turbo (F82/83), 2019-2021 BMW M2 Competition L6-3.0L Twin Turbo (F87).
BMW 2015-16 M3 (F80) 3.0L Twin Turbo L6 S55Durable rotomolded polyethylene one piece dual enclosed air box with tube; comes with a patented SuperNano-Web dry filter that twist locks into the air box for an air tight seal; the housing includes a Black Badge.- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
- Twist-Lock Technology to securely integrate the air filter to the housing
- Aggressive underHood appearance while maintaining an OE fit
- Dyno Proven gains of up to 22 hp and 27 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene tubes and housings
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Larger Inlet Air Scoop And Induction Tube
- Replacement air filter # X-1097-BB
- Made in Pomona, California USA
- Patent Pending
-
The Injen Technology X-Pedal Pro Black Edition is the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory with Injen’s X-Pedal Pro Black Edition for a completely new driving experience. You’ll be amazed how different your vehicle feels after this quick and simple install!, , Modern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You’ll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen Technology’s X-Pedal Pro Black Edition allows you to adjust the pedal feel and ultimately the throttle response of your vehicle directly on the fly. , , The X-Pedal Pro Black Edition is a plug-in module that requires less than 5 minutes to install and delivers immediate, customized performance for your vehicle. Specifically, the X-Pedal Pro Black Edition controls the throttle signals going into your stock ECU (Engine Control Unit) so that your vehicle instantly responds faster and accelerates swifter… or slower and more economically ? depending on how you program the X-Pedal Pro Black Edition. The choice is yours.
X-Pedal PRO Black Edition Throttle Controller, Part No. PT0014B, 2011-2024 Lexus, 2012-2016 Scion, 2020-2025 Subaru, 2014-2025 Toyota- Note: This part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Automatic Transmission equipped vehicles will notice a marked improvement in shifting performance.
- The X-Pedal Pro Black Edition is warranty friendly and will not leave a footprint after removal.
- The sleek, black anodized aluminum housing provides an elegant aesthetic inside the cabin.
- Provides increased throttle response for safer passing and an improved driving experience.
- Quick and simple plug-and-play installation requires no cutting or splicing of any wires.
- The built-in high-speed processor greatly improves throttle signal response time
- The X-Pedal Pro Black Edition is compatible with most Aftermarket Programmers.
- ECO Mode: 7 levels, for driving in city areas which can improve fuel economy
- DAC (Digital to Analog Convert) – provides 1000 times/sec processing speed
- Launch Control/Drag Race Mode: Gets you to reach max acceleration faster
- Works seamlessly with both Automatic and Manual transmissions.
- Anti-skid function helps on lower friction surfaces with ease
- Sport Mode: 9 levels, suitable for mountain roads and racing
-
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Short Ram Air Intake System; Incl. Tubing/Filter/Heat Shield/Hardware/Instruction; w/MR Technology; HP Gains +11.0 HP/Torque Gains +10.0 ft. lbs.; Black;
Lexus 2015-2017 RC350 3.5L V6Tuned air intake system w/MR Tech.;heat shield and SuperNano-Web dry filter HCT-No CARB- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 11 hp and 10 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1034BLK or 1034RED
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1015-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque up to 10 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
-
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Short Ram Air Intake System; Incl. Tubing/Filter/Heat Shield/Hardware/Instruction; w/MR Technology; HP Gains +11.0 HP/Torque Gains +10.0 ft. lbs.; Polished;
Lexus 2015-2017 RC350 3.5L V6Tuned air intake system w/MR Tech.;heat shield and SuperNano-Web dry filter HCT-No CARB- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 11 hp and 10 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1034BLK or 1034RED
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1015-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque up to 10 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
-
The Injen Performance Cat-Back Exhaust System for the 2015-2021 Subaru WRX and WRX STI was designed from the ground up to compliment the aggressive styling and blistering performance of these sporty sedans. Our custom dual muffler design hones the tone of the engine into an ear-pleasing symphony. Purposefully delivering a crisp, clean, deep rumble at idle and an aggressive roar when you’re pushing the limits. Manufactured from only the highest grade 304 stainless-steel, from the flanges to quad titanium look tips, for the highest level of tensile strength and rust resistance. The premium polished finish on the mufflers is sure to impress anyone curious enough to peek at the undercarriage and the burnt titanium look exhaust tips offer superb aesthetics that perfectly compliment the sound of the system itself.
Performance Exhaust System, Part No. SES1207TT, 2015-2021 Subaru WRX H4-2.0L / 2015-2021 Subaru WRX STI H4-2.5L- This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles.
- Custom investment cast Y-Pipe equalizes flow for improved performance and sound
- Dyno Proven power increase of 13 HP and 11 Lb.-Ft. of torque at the wheels
- Dual Oval, straight-through mufflers for exceptional sound and performance
- Exhaust Tips are bolt-on and allow for a staggered or straight install
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Stainless Steel Investment Cast Flanges for a Fast and Easy Install
- Beautiful V-Band clamps used for a simple, leak-free installation
- Performance Stepped Pipe design utilizing 76MM and 60MM piping
- Manufactured from Mandrel-Bent 304 Stainless Steel
- Show Quality Embossed Stainless-Steel Muffler
- Premium Stainless-Steel Hardware and Hangers
- 3.250? Burnt Titanium look, Quad-Tip design
- Designed and Manufactured in Pomona, CA
- Emissions:
Showing 19453–19464 of 29590 results