Description
Garrett Air / Air Intercooler CAC (18.00in x 8.00in x 3.50in) – 425 HP
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
Garrett Air / Air Intercooler CAC (18.00in x 8.00in x 3.50in) – 425 HP
Garrett Air / Air Intercooler CAC (18.00in x 8.00in x 3.50in) – 425 HP
Specification
| Weight | 12.7 kg |
|---|---|
| Dimensions | 27.1 × 12.6 × 5.7 cm |
| air_freight_prohibited | false |
| not_carb_approved | true |
| carb_acknowledgement_required | true |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| regular_stock | false |
| units_per_sku | 1 |
| brand | Garrett |
| part_number | 703520-6025 |
Related products
-
CSF 04-13 BMW 335i/xi (E90/E91/E92/E93) High Performance Stepped Core Bar/Plate Intercooler – Silver
The OEM intercooler is made from plastic end tanks that are crimped onto an aluminum tube/fin core that is 4 inches thick (105mm core width) and is 5 inches in height (127mm). This may be enough to keep IAT’s in check on a completely unmodified / stock vehicle, but once users to start increase power through bolt-on modifications, tuning, and built engines, the OEM intercooler will become the Achilles Heel of the system with IAT’s skyrocketing out of the optimal range and drastically lowering the performance capabilities of the vehicle. Enter CSF with their stepped core design, bar/plate high performance N54 intercooler. This “drop-in fit” intercooler, which requires no modifications to install, has a bottom / larger section that is 5.5in thick (140mm) with a front face that is massive 8.25in tall (210mm). Made from CSF’s industry exclusive rounded bar/plate core design. The rounded front face of the cooling bars allows for better airflow into the core. Airflow hits the core surface, and rather than scattering like it does with hitting the face of a flat bar that all competing products have, it travels around the face of the round bar and into core for much better performance than both the OEM design (flat face) and all other aftermarket competitors (all have flat face tubes or bars). A huge improvement over the OEM unit, and enough to handle even the most advanced N54 engine builds. Good for 1000hp no problem!
The CSF N54 Intercooler’s Stepped Core Design maximizes surface area contact and internal intake air-flow volume. The Rounded Front Face Bar/Plate Design optimizes airflow through the core and is a true “Drop-in Fit” Plug-and-Play Design.
The CSF #8127 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Clears OEM Crash Bar, No Modification to Install with No Cutting or Trimming Required
- No Cheaper Silicone Hose Clamp System, BMW Style “Quick-Connect” Machined Fittings
- OEM Mounting Locations with Fitment Kit and Instructions Included
- The Only TRUE Plug-and-Play Solution Compared to the Rest
- Bottom/Larger: Section: 5.5″ Thick (140mm)
- Massive Front Face: 8.25″ Tall (210mm)
- Good for Over 1000 HP!
-
Perfect Fit: Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply polyester reinforced silicone hump coupling for strength. Mandrel-bent Tubing: Constructed of 2-1/2″ to 3″ mandrel-bent aluminum tubing then powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandre l bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tubes from engine heat and protects them from corrosion. Two 1/8″ NPT ports are provided for sensors or water-methanol injection. aFe Badging: Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style.
BladeRunner 3 IN Aluminum Cold Charge Pipe Black BMW 335i (F30) 12-15/ M235i (F22/23) 14-16 L6-3.0L (t) N55 M/T- Retains Factory Style Throttle Body And Intercooler Quick Connect
- Includes Premium Stainless Steel Clamps For Secure Fit
- 5-Ply Silicone Coupling For Strength
- Outflows Factory Charge Pipe By 18%
- Powdercoat For Heat Resistance
- Hassle Free Installation
-
This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2012-2015 BMW 335i (F30) L6-3.0L (t) with the N55 engine, this BladeRunner intercooler utilizes a 5″ bar and plate core design. This design outflows the factory tube and fin core design, while the 3/16″ TIG-Welded end tanks offer superior strength and durability. In testing, this intercooler showed flow gains up to 15% and lowers manifold intake air temperatures. End Tanks: The unique BladeRunner end tanks are constructed out of 3/16″ thick aluminum plates and include two 1/8″ NPT ports for sensors or water-methanol injection. 5″ Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fi n design used by the factory. TIG-Welded: 100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 200psi. Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. The intercooler and tubes utilize billet factory style quick connects to assure a leak-free connection.
BladeRunner GT Series Intercooler BMW 335i (F30) 12-15 / M235i (F22/23) 14-16 L6-3.0L (t) N55- Incorporates Factory Style Quick Conn. For Intercooler Tubes
- 100% TIG-Welded For Strength And Durability
- Lowers Manifold Intake Air Temperature
- No Cutting Or Modifications Are Needed
- Outflows Factory Intercooler by 15%
-
BMW has a knack for maintaining their stake as the benchmark when it comes to performance luxury vehicles, with the F8X generation being no exception. The S55 that powers the 2015-2020 BMW F8X M3, M4 and M2 Competition is dripping with technology, which includes an air-to-water intercooling system for a means of keeping cool. Where BMW’s intercooler design was enough to help bring this generation of mid-sized M’s to their peak, we here at Mishimoto found some weaknesses that we felt obliged to improve on. We started with the end tanks. The Mishimoto Performance Air-to-Water Intercooler features full, cast aluminum end tanks, TIG welded to our bar-and-plate core for maximum durability as you increase the boost in your Bimmer. Our end tanks also include internal air diverters on both the inlet and outlet to ensure an even flow of charged air through the core. When it comes to the core, bigger is better, and we were able to expand the size of our core in all dimensions, resulting in a 29-percent increase in core volume while abstaining from any modifications when it comes to installation. Our new core also features a unique single-pass internal fin layout for the coolant passage for optimal heat transfer from the charged air to the coolant. With our improvements combined, we saw the Mishimoto 2015-2020 BMW F8X M3 and M4 Performance Intercooler increase flow through the core by 16-percent and recorded a 12 F drop in intake air temperatures when tested with the Mishimoto Performance Heat Exchanger. We also recorded an average increase of 11whp and 8wtq during our testing with peak gains of up to 31whp and 10wtq. With the micro-wrinkle black finish and sleek header plate design, the Mishimoto Performance Air-to-Water Performance intercooler makes for not only the perfect addition to your F8X build, but also looks right at home in the M’s engine bay. Like all of our products, the Mishimoto 2015-2020 BMW F8X M3, M4, and M2 Competition Performance Air-to-Wate
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.- Average power gains of 11 whp and 8 wtq when combined with Mishimoto Heat Exchanger
- 29-percent increase in core volume
- 16-percent increase in flow
Reviews
There are no reviews yet.