Description
BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Red Dodge RAM 1500 EcoDiesel 14-18 V6-3.0L (td)
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
aFe Bladerunner 3in Red Intercooler Hot and Cold Side Tubes 14-15 Dodge Ram 1500 EcoDiesel V6 3.0L
BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Red Dodge RAM 1500 EcoDiesel 14-18 V6-3.0L (td)
Specification
| Weight | 10 kg |
|---|---|
| Dimensions | 32.1 × 13.9 × 10.8 cm |
| air_freight_prohibited | false |
| not_carb_approved | true |
| carb_acknowledgement_required | true |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 802959463604 |
| brand | aFe |
| part_number | 46-20174-R |
Related products
-
The same intercooler cores used in this application are the same style used in other CSF air-to-air systems developed for the Urus/RS Q8/Cayenne Turbo, Audi RS6/RS7, and Porsche 992 Turbo/S, with incredible results. These cores eliminate heat soak and lower Intake Air Temperatures (IATs) much more efficiently than traditional Bar & Plate designs. This gives us maximum performance for extended periods of time under demanding driving conditions and in vehicles with increased power levels through modifications and tuning. The 4.0L twin-turbo V8 in the SQ7/SQ8 starts to experience debilitating heat soak and progressively increasing IATs with the OEM intercoolers. This results in the ECU pulling engine timing and drastically decreasing power output. The CSF by PWR Intercoolers solve this issue and allow vehicles to perform at optimal levels consistently and for prolonged periods of time.
The CSF by PWR SQ7/SQ8 Twin Intercooler Set features Formula-1 grade cores which offer the greatest reduction in IATs and help eliminate heat soak. The Billet Aluminum construction offers the greatest strength and durability possible.
The CSF #8280B Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Eliminates Heat Soak and Lower Intake Air Temperatures (IAT) for Maximum Performance in High-Performance and Race Conditions
- Formula-1 Performance Grade Cores by PWR (2-Row Cores features Rolled Tubes w/ Inner Fins)
- Thermal Dispersion Cerakote (CSF #8280B) – Available in Raw Billet Aluminum (CSF #8280)
- 100% TIG Welded vs OEM Crimped Plastic End Tanks for Maximum Strength & Durability
- True Plug-and-Play “Drop-in Fit” Installation Requires Absolutely No Modifications
- 1-Piece Welded Charge Pipe vs OEM Bolt-On Pipe w/ O-Ring (known failure point)
- OEM Style Inlet/Outlet Connections for Precise Fitment With All OEM Components
- Sold as a pair (Left & Right Intercoolers)
- Made in the USA at PWR North America
- Performance Testing by Unitronic
- CNC Machined Billet End Tanks
-
aFe POWER BladeRunner turbo muffler delete pipe replaces the factory turbo muffler located between the turbo compressor outlet and the hot side charge pipe. The straight through oversized design tremendously increases flow and turbocharger sound by creating a smooth transition between the turbo and intercooler tube. CNC machined from 6061-T6 aluminum then finished in red anodizing also provides superior strength and long lasting durability. This turbo muffler delete kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and a heavy-duty, 5-ply, polyester reinforced silicone coupling for superior strength and durability. Finished with Red Anodizing and a unique laser-etched aFe Power logo for a custom look. Designed to work with the OE charge pipes only. this item will only work with aFe POWER charge pipe PN: 46-20414-B.
BladeRunner Turbo Muffler Delete for aFe Charge Pipe Red Volkswagen GTI (MKVII) 15-21 L4-2.0L (t)- Maximize your flow through your aFe Power Charge Pipes with the BladeRunner billet aluminum turbo muffler delete.
- Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Coupling
- Includes an Oversized Two-Piece 2-1/4” Billet Aluminum Turbo Muffler Delete
- Dyno-Proven Gains of +8 HP and +10 Lbs. x Ft. TQ
- For Use With aFe Charge Pipe Kit (46-20414-B)
- Anodized Red for Corrosion Resistance
- Outflows factory turbo muffler by 7%
-
The CSF N55 Intercooler’s Stepped Core Design maximizes surface area contact and internal intake air-flow volume. The Rounded Front Face Bar/Plate Design optimizes airflow through the core and is a true “Drop-in Fit” Plug-and-Play Design. In testing the CSF Intercooler showed Intake Air Temperatures (IATs) that were 38 deg F (21 deg C) lower than factory after just 3 consecutive pulls from 4k RPM to 5.8K RPM. In that test, the CSF Intercooler maintained stable IATs. While most intercoolers don’t offer immediate performance gains without increasing boost pressure, the CSF Intercooler shows an increase of 15-20hp on stock N55 Powered BMW’s and 25+hp on modified examples.
The CSF N55 Intercooler’s Stepped Core Design maximizes surface area contact and internal intake air-flow volume. The Rounded Front Face Bar/Plate Design optimizes airflow through the core and is a true “Drop-in Fit” Plug-and-Play Design.
The CSF #8115 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Stepped Core Design for Maximum Surface Area Contact and Internal Intake Air Flow Volume – Largest “Drop-in Fit” Intercooler Available in the Industry
- “Drop-in Fit” Design for an Easy & Quick Plug-and-Play Installation – Complete with OEM-Style “Quick Connect” Inlet/Outlet Connections
- Designed with 3D Scanning/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization
- 40’F Drop in Temperatures When Compared to the OEM Intercooler After Multiple Repeated Runs
- Rounded Front Face Bar/Plate Design for Optimized Air Flow Through the Core
- Power Increase of 15-20 HP on Stock Cars, 25+ HP on Modified Vehicles
- Fully Reversible Back to OEM Spec with No Modifications Needed
- Lab Tested in CSF’s In-House Wind Tunnel
- Lifetime Warranty
-
This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2012-2015 BMW 335i (F30) L6-3.0L (t) with the N55 engine, this BladeRunner intercooler utilizes a 5″ bar and plate core design. This design outflows the factory tube and fin core design, while the 3/16″ TIG-Welded end tanks offer superior strength and durability. In testing, this intercooler showed flow gains up to 15% and lowers manifold intake air temperatures. End Tanks: The unique BladeRunner end tanks are constructed out of 3/16″ thick aluminum plates and include two 1/8″ NPT ports for sensors or water-methanol injection. 5″ Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fi n design used by the factory. TIG-Welded: 100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 200psi. Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. The intercooler and tubes utilize billet factory style quick connects to assure a leak-free connection.
BladeRunner GT Series Intercooler BMW 335i (F30) 12-15 / M235i (F22/23) 14-16 L6-3.0L (t) N55- Incorporates Factory Style Quick Conn. For Intercooler Tubes
- 100% TIG-Welded For Strength And Durability
- Lowers Manifold Intake Air Temperature
- No Cutting Or Modifications Are Needed
- Outflows Factory Intercooler by 15%
Reviews
There are no reviews yet.