0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

Mishimoto 2016+ Honda Civic 1.5T / 2017+ Honda Civic Si Silver Intercooler Kit w/Red Pipes

Keep the charged air temperatures down in your turbocharged Civic with the 2016+ Honda Civic Performance Intercooler Kit from Mishimoto! In the age of the turbocharger, Honda has finally joined the ranks of forced induction by equipping their tenth generation of the Civic with the L15B7. Where the Earth Dreams technology might be advanced, It’still suffers from an age-old enemy — heat. The stock intercooler utilizes a tube-and-fin construction coupled with plastic end tanks, giving high temperatures a perfect breeding ground. Our intercooler is designed with the Honda enthusiast in mind and eliminates high charged air temperatures that set up shop in the stock intercooler. The all-aluminum, bar-and-plate construction is specifically designed to shrug off heat generated from compressing air into the intake manifold. Our intercooler also has increased the volume by 102-percent and fin surface area by 97-percent, which helps drop outlet air temperatures by 20 F over the stock intercooler, and up to 42 F once a performance tune is added. The benefits of our upgraded design don’t stop with the intercooler. Our direct-fit intercooler kit also gives the stock intercooler piping an overhaul. We ditched the plastic and rubber combination that made up the original equipment and replaced them with mandrel-bent aluminum and 5-layer, fiber-embedded silicone couplers. Our piping also increases the size of both the hot and cold-sides of the piping system from 42mm to 55mm, equating in a 30-percent increase in size. We also took the liberty of reducing the angles of the bends in the piping, giving the charged air a more direct flow through the intercooling system and improving the flow. Our performance intercooler kit adds up to 4 hp and 8 ft-lbs of torque on the stock tuning, with the potential to boost that power gain to 11 hp and 9 ft-lbs of torque with a tune.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.

  • Increased core size of 102-percent and fin surface area by 97-percent
  • Max power gains of 4 whp and 8 ft-lbs torque on stock tuning
  • Patent Pending

1,506.16 $

SKU MMINT-CIV-16KSLWRD
brand Mishimoto
Add to wishlist Add to compare

Description

Keep the charged air temperatures down in your turbocharged Civic with the 2016+ Honda Civic Performance Intercooler Kit from Mishimoto! In the age of the turbocharger, Honda has finally joined the ranks of forced induction by equipping their tenth generation of the Civic with the L15B7. Where the Earth Dreams technology might be advanced, It’still suffers from an age-old enemy — heat. The stock intercooler utilizes a tube-and-fin construction coupled with plastic end tanks, giving high temperatures a perfect breeding ground. Our intercooler is designed with the Honda enthusiast in mind and eliminates high charged air temperatures that set up shop in the stock intercooler. The all-aluminum, bar-and-plate construction is specifically designed to shrug off heat generated from compressing air into the intake manifold. Our intercooler also has increased the volume by 102-percent and fin surface area by 97-percent, which helps drop outlet air temperatures by 20 F over the stock intercooler, and up to 42 F once a performance tune is added. The benefits of our upgraded design don’t stop with the intercooler. Our direct-fit intercooler kit also gives the stock intercooler piping an overhaul. We ditched the plastic and rubber combination that made up the original equipment and replaced them with mandrel-bent aluminum and 5-layer, fiber-embedded silicone couplers. Our piping also increases the size of both the hot and cold-sides of the piping system from 42mm to 55mm, equating in a 30-percent increase in size. We also took the liberty of reducing the angles of the bends in the piping, giving the charged air a more direct flow through the intercooling system and improving the flow. Our performance intercooler kit adds up to 4 hp and 8 ft-lbs of torque on the stock tuning, with the potential to boost that power gain to 11 hp and 9 ft-lbs of torque with a tune.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.

  • Increased core size of 102-percent and fin surface area by 97-percent
  • Max power gains of 4 whp and 8 ft-lbs torque on stock tuning
  • Patent Pending

Specification

Weight 21 kg
Dimensions 38 × 9.5 × 7.5 cm
air_freight_prohibited

false
not_carb_approved

false
carb_eo_number

D-759-12
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

Compliant
carb_acknowledgement_required

false
number_of_boxes

2
regular_stock

t
units_per_sku

1
upc

811580034022
brand

Mishimoto
part_number

MMINT-CIV-16KSLWRD

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: MMINT-WRX-22SLRD

    Mishimoto 2022+ WRX Front Mount Intercooler Kit SL Core WRD Pipes

    No Reviews

    For 2022+ WRX owners looking to take the next step in performance, look no further than Mishimoto’s Performance Front-Mount Intercooler Kit. Whether you’re building your WRX for the track, dragstrip, or the road, upgrading your WRX’s intercooler is an absolute must. Designed with a massive core, CFD-optimized cast end tanks, and high-flow pipes, this intercooler offers gains of 12 hp and 11.8 lb-ft torque.—-The front mounting location of this kit places the intercooler in the lower bumper grille for maximum airflow through the core, making this system ideal for high-performance builds. In dyno testing, our intercooler was able to bring outlet temperatures to within 10-degrees of ambient air temp, ensuring safe power run after run, even on the stock tune. CFD-optimized end tanks, ID-matched pipes, and a high-flow, 4 inch-thick core result in a 1.5 PSI pressure drop, so less of the boost your turbo makes is wasted.—-Performance is great, but if you have to destroy your car for it, it’s useless. Our kit contains everything needed for installation with no cutting of the bumper or body required. Our intercooler kit also retains the factory side impact bars and includes a bumper support bar with factory tow hook mounting for safety on the track and the street. The included washer fill neck relocation kit keeps maintenance easy, while allowing for a clean install.—-So, If you’re ready to ditch your stock, heat-soak-prone intercooler, it’s time to upgrade to the Mishimoto Performance Front Mount Intercooler Kit. Designed for dependable performance and backed by Mishimoto’s Lifetime Warranty, our 2022+ WRX front mount intercooler kit is the perfect choice for bringing your WRX to the next level.
    Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.

    • Lowers outlet temperatures to within 10-degrees of ambient air temp
    • Max power gains of 12 HP and 11.8 lb-ft. of torque on stock tune
    • Fits 2022+ Subaru WRX
    2,192.18 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: MMINT-MK8-22KP

    Mishimoto 22+ Volkswagen GTI MK8 (MQB) Performance Intercooler Kit P

    No Reviews

    For 2022+ Volkswagen GTI MK8 owners looking to take their car to the next level, look no further than the Mishimoto Performance Intercooler Kit. Designed for a direct-fit installation, this kit includes our intercooler, mandrel-bent aluminum pipes, and durable 5-layer silicone couplers.
    —-
    The intercooler boasts an 89% increase in core volume and 162% increase in external fin surface area over stock for superior heat dissipation, resulting in an impressive 23°F drop in outlet temperature. The cast end aluminum tanks with internal diverters optimize airflow while the sturdy bar-and-plate core design offers long-lasting performance and dependability.
    —-
    Built to last and backed by Mishimoto’s Lifetime Warranty, this intercooler kit is a must-have any MK8 owner who’s ready to upgrade.
    Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.

    • Kit includes mandrel-bent aluminum pipes and durable 5-layer silicone couplers
    • Drops intercooler outlet temperature by 23°F
    • 89% increase in core volume over stock
    1,643.09 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: MMINT-MK6-06

    Mishimoto Volkswagen MK5/MK6 GTI / Volkswagen MK 6 Golf R Engine Intercooler

    No Reviews

    Give your MK5 and MK6 GTI/Golf R the cooling it deserves with the Mishimoto Performance Intercooler. Volkswagen might have invented the concept of the hot-hatch, but the spicy Golf can still use a helping hand when it comes to keeping its cool. The stock intercooler system equipped in the GTI is adequate for the daily commute. However, with the popularity of boosting, a component like the tube-and-fin heat exchanger struggles to keep up. Coupled with the combination of plastic in the construction, It’s only a matter of time before you start to see boost leaks. We here at Mishimoto’started from the ground up with the MK5 and MK6 GTI/Golf R Performance Intercooler. We ditched the plastic in favor of fully cast aluminum end tanks that can handle any amount of boost you can throw at them. We also incorporated an internal air diverter into our end tanks to make use of the full core. The Mishimoto MK5 and MK6 Volkswagen GTI/Golf R Performance Intercooler core replaces the lightweight tube-and-fin construction with a more robust bar-and-plate setup. This heavy-duty construction lends itself to improved durability and heat dissipation. Our core has a 46-percent increase in core volume with a 97-percent increase in external fin surface area. Combined with our improved end tanks, the complete package improves flow by 9-percent and drops 20 F from the charged air across the core. The Mishimoto MK5 and MK6 GTI Intercooler Kit also includes 5-layer silicone couplers and a CNC-machined adapter to ensure a perfect fit with the stock pipes. This intercooler is also backed by the Mishimoto Lifetime Warranty for a worry-free installation on your Volkswagen.
    Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.

    • 97-percent increase in external fin surface area
    • 46-percent increase in core volume
    • 9-percent increase in flow
    1,232.30 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com