0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

AEM EV 8 Channel CAN Driven Slave Type Power Distribution Unit (PDU)

Now available for internal combustion engines! The AEM EV PDU-8 is an eight channel Power Distribution Unit expansion device that gives you the power to program and control various switched devices using our ECU/VCUs, like high-voltage contactors, cooling fans, headlights, brake lights, turn signals, windshield wipers, fuel pumps, and more. The ability to connect up to eight PDU-8s (four on AEM Dashes, and one on Infinity ECU’s) on the same CAN bus network lets installers mount the individual PDUs closer to the subsystems they are controlling, which simplifies wiring, reduces weight, and increases reliability. This CAN-based solid-state control module eliminates the need to install fuses and relays for the switched functions that it operates. The PDU-8 can easily be controlled by other CAN based controllers that support custom CAN settings, such as Motec, Link, FuelTech, Haltech, etc. Does work with Holley EFI if using the AEM dash display for logic based control.
PDU-8, 8 CHANNEL CAN PDU Four 20A and four 10A high-side 12V outputs
Fully-sealed, waterproof billet-aluminum enclosure

  • Module is fully sealed for installation close to switched controls, simplifying wiring and reducing weight
  • Four 20A and four 10A high-side 12V outputs for activating/deactivating various switched devices
  • Small size and lightweight (103x67x33mm/4.05×2.70×1.5″, 190g/6.7oz/0.42lbs.)
  • CAN-commanded PDU, no logic programming required for PDU operation
  • Fully-sealed, waterproof billet-aluminum enclosure

1,051.55 $

SKU 30-8300
brand AEM
Add to wishlist Add to compare

Description

Now available for internal combustion engines! The AEM EV PDU-8 is an eight channel Power Distribution Unit expansion device that gives you the power to program and control various switched devices using our ECU/VCUs, like high-voltage contactors, cooling fans, headlights, brake lights, turn signals, windshield wipers, fuel pumps, and more. The ability to connect up to eight PDU-8s (four on AEM Dashes, and one on Infinity ECU’s) on the same CAN bus network lets installers mount the individual PDUs closer to the subsystems they are controlling, which simplifies wiring, reduces weight, and increases reliability. This CAN-based solid-state control module eliminates the need to install fuses and relays for the switched functions that it operates. The PDU-8 can easily be controlled by other CAN based controllers that support custom CAN settings, such as Motec, Link, FuelTech, Haltech, etc. Does work with Holley EFI if using the AEM dash display for logic based control.
PDU-8, 8 CHANNEL CAN PDU Four 20A and four 10A high-side 12V outputs
Fully-sealed, waterproof billet-aluminum enclosure

  • Module is fully sealed for installation close to switched controls, simplifying wiring and reducing weight
  • Four 20A and four 10A high-side 12V outputs for activating/deactivating various switched devices
  • Small size and lightweight (103x67x33mm/4.05×2.70×1.5″, 190g/6.7oz/0.42lbs.)
  • CAN-commanded PDU, no logic programming required for PDU operation
  • Fully-sealed, waterproof billet-aluminum enclosure

Specification

Weight 0.8 kg
Dimensions 9.7 × 9.1 × 2.2 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

false
ltl_freight_required

false
prop_65

Unknown
part_type

automotive
epa

N/A
regular_stock

false
clearance_item

t
units_per_sku

1
upc

840879027100
brand

AEM
part_number

30-8300

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 30-8402

    AEM EV Tesla LDU Base Drive Inverter Control Board & Harness (MUST BE USED WITH VCU200)

    No Reviews

    AEM EV’s Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV’s LDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability.
    Programmable Control for EV Swaps Using Tesla Model S and Model X “P” Large Drive Units (LDUs) when paired with AEM Vehicle Control Units (VCU)

    • · Full control of torque curves, torque limits, regenerative braking, accelerator pedal response, drive-mode switches, and much more.
    • · Works with Tesla Model S or Model X Base Large Drive Unit (LDU)
    • · Must be used with VCU unit
    • · Unlocks Tesla Drive units
    1,543.13 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 30-8100

    AEM EV VCU300 Programmable Vehicle Control Unit 196-pin Connector 3 CAN 4-Motor Control

    No Reviews

    AEM EV Vehicle Control Units (VCUs) are the missing link for high-performance EV street-conversion and motorsports applications. They allow the calibrator to create customized torque management strategies applicable to a wide range of EV systems and component combinations. They integrate EV systems and unify the tuning experience providing motorsports- and conversion-ready features presented in a high feature, modern and customizable interface. Be In Control with AEM EV.
    Programmable EV Vehicle Control Unit, Universal, 196-pin connector, 3 CAN, 4-Motor Control, IP67k Aluminum Enclosure

    • Startup and shutdown sequencing of high voltage components, including independent contactor control for each inverter system
    • Diagnostics and fault detection including CAN message timeouts, thermal limits, contactor, and inverter enable cross-checks
    • Input characterization including accelerator pedal, brake switch, PRND switches, and other driver/vehicle inputs
    • Motor torque management dependent on vehicle operating states and other driver-selectable modes
    • Closed-loop motor speed regulation for indirect drive transmission applications
    • CAN message translation for BMS, inverter, PDUs, and other CAN accessories
    • Dynamic torque limits that maximize safety and optimize performance
    • Redundancy and arbitration features for all safety-critical inputs
    • Accessory control of cooling pumps, cooling fans, lights and more
    • Primary functions of the AEM VCU300 include:
    5,340.20 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com