0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

COMP Cams Electric Vacuum Pump Kit

A high lift Cam in a performance street vehicle can offer up great sound and excellent performance. But if your car or truck has power brakes, a minimum of 16 inches of vacuum is critical to proper brake booster operation, something not always present if your Camshaft features enhanced overlap. The COMP Cams Electric Vacuum Pump ensures that your vacuum stays between 18 and 22 inches so you never have to worry whether your brakes will be there when you need them. Triggered by a vacuum switch included in the kit, the COMP Cams Electric Vacuum Pump requires a 12V negative ground system and only operates when vacuum drops below 18 inches of vacuum and then turns off over 22 inches of vacuum. The kit includes all of the parts necessary to install the unit along with wiring, hoses and brackets. The system utilizes a highly efficient electric pump, relay switch and distributor with vacuum switch, which should be mounted close together for the most effective performance.
Our electric vacuum pump kit operates off a 12v negative ground electrical system which ensures that the vacuum for your power brakes never drops below 18 in/hg.

616.12 $

Out of stock
SKU 5500CPG
brand COMP Cams

Description

A high lift Cam in a performance street vehicle can offer up great sound and excellent performance. But if your car or truck has power brakes, a minimum of 16 inches of vacuum is critical to proper brake booster operation, something not always present if your Camshaft features enhanced overlap. The COMP Cams Electric Vacuum Pump ensures that your vacuum stays between 18 and 22 inches so you never have to worry whether your brakes will be there when you need them. Triggered by a vacuum switch included in the kit, the COMP Cams Electric Vacuum Pump requires a 12V negative ground system and only operates when vacuum drops below 18 inches of vacuum and then turns off over 22 inches of vacuum. The kit includes all of the parts necessary to install the unit along with wiring, hoses and brackets. The system utilizes a highly efficient electric pump, relay switch and distributor with vacuum switch, which should be mounted close together for the most effective performance.
Our electric vacuum pump kit operates off a 12v negative ground electrical system which ensures that the vacuum for your power brakes never drops below 18 in/hg.

Specification

Weight 8.53 kg
Dimensions 10 × 6.8 × 6.5 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

false
units_per_sku

1
upc

036584151098
brand

COMP Cams
part_number

5500CPG

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 26915CS-KIT

    COMP Cams Kit Beehive Spring Steel LS

    No Reviews

    Steel Valve Locks – 511-16 Valve Seals – 4705-16 Spring Seats This Beehiveâ„¢ Valve Spring Kit for LS engines is designed for hydraulic Roller cams and includes carefully matched Beehiveâ„¢ Springs, retainers, locks, Seals and spring seats. With a .600″ maximum lift, these Beehiveâ„¢ Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehiveâ„¢ shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Also Available with Tool Steel Retainers or Titanium Retainers.
    Including properly matched quality beehive valve springs, 7 degree locks, viton seals, hardened seats and lightweight tool steel retainers, this spring kit is ready to bolt onto LS heads with aggressive cams with up to .600″ valve lift.
    See 26918CS-KIT or 26918TS-KIT for Beehive spring kits that support up to .625″ valve lift.

    614.75 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 5449

    COMP Cams Cam Phaser Kit Ford 3V Limiter

    No Reviews

    Cam phasers are specially designed, computer-controlled Cam Gears that automatically optimize Camshaft timing based on the current engine rpm. Engine oil is pressure fed to the Cam phasers through a Series of passageways in the cylinder heads and Camshafts. The engine computers control solenoids that adjust this oil flow into and out of the phaser’s control chambers, giving the ability to retard the cams up to 60 crank degrees. While this Technology provides tremendous efficiency benefits, such as fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance Camshafts. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small Cam profiles with little overlap. The U.S. Patented COMP Cams Cam Phaser Limiter Kits for Ford Modular 3V engines restrict the range of Cam timing movement to only 20 degrees, thus providing the necessary valve clearance for Serious performance cams with tighter lobe separations – all while still utilizing the benefits of VVT Technology. Combining this performance modification with more aggressive Cam profiles has resulted in some of the largest upper-rpm gains we’ve ever seem from such a simple valve train adjustment without sacrificing any bottom end or mid-range performance. Part Number 5449 Includes:Cam Phaser Limiters (2)Limiter ToolSpring Compressor
    Our VVT limiter kit for ’05+ Ford 4.6/5.4L 3 valve engines comes with 2 phaser limiters, a VVT spring compressor, VVT spring lock tool and the instructions required for proper installation. This kit limits cam movement to 20 degrees.

    386.07 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 5493CPG

    COMP Cams Phaser Limiter Kit Ford 5.0L

    No Reviews

    The Phaser Limiters and Adjustable Phaser Locks, which took home the honor of Best New Performance-Racing Product at the 2010 SEMA show, allow independent control over intake and exhaust centerlines, and eliminate piston to valve clearance issues that can occur when using larger aftermarket Camshafts in 2011 Ford 5.0L Modular V8 engines. The U.S. Patented COMP Cams Phaser Limiters for the 5.0L Coyote Modular V8 Engines physically limit maximum Cam phasing to 20 crank degrees (10 Cam degrees). Four separate phaser limiters, with the proper tuning software, allow the OEM computer to independently control intake and exhaust centerlines. Take full advantage of the benefits of Variable Valve Timing (VVT) when using aggressive aftermarket Camshafts without needing to install custom pistons to eliminate valve clearance issues. For maximum performance, custom remapping of the Cam phasing ECU control tables is required.Physically limit maximum Cam phasing to avoid piston to valve clearance issues with aggressive camsFour phaser limiters or locks offer precise, independent control over intake and exhaust centerlinesPhaser limiters physically limit Cam phasing to 20 crank degrees (10 Cam degrees) while allocating maximum intake advance and exhaust retardAllows use of larger, more aggressive aftermarket Camshafts in 2011 Ford 5.0L Modular V8 engines
    This limiter kit for ’11-’14 Ford 5.0L Coyote limits the cam phasing to 25 crank degrees for camshafts with more duration and lift. By keeping VVT while adding larger camshafts, more power is gained without sacrificing bottom end torque.

    150.55 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com