Description
Rear upper StrongArm for 1958 Impala. Includes 1 tubular upper control arm with delrin bushings and sleeves. Powder coated satin black.
1963 Impala, Bel Air, etc.
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
Ridetech 1958 Impala Rear Upper StrongArm
Rear upper StrongArm for 1958 Impala. Includes 1 tubular upper control arm with delrin bushings and sleeves. Powder coated satin black.
1963 Impala, Bel Air, etc.
Specification
| Weight | 13.4 kg |
|---|---|
| Dimensions | 23.6 × 21.8 × 7.1 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | t |
| units_per_sku | 1 |
| upc | 840123500502 |
| brand | Ridetech |
| part_number | 11046699 |
Related products
-
Adjust front camber and caster +-1.5deg on the Audi B9 platform with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. For the left hand (LH) side, use #81381. For the right hand (RH) side, use part number #81382. Want to be able to adjust both sides? Use part #81383. Forged 6061-T6 Aluminum construction for maximized strength at minimum weight OE style, maintenance free, bootedball joints Large 18mm threaded adjuster links Replacement pinch bolts included California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Kit includes both arms for both sides of the vehicle, order one kit per vehicle
- OE style bushing and ball joint maintain factory feel and noise reduction
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Comes with pinch bolt hardware
-
Complete replacement control arms featuring Whiteline Anti Lift Kit that are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response – forcing more consistent alignment angles through the corner due to the reduced bush compliance.
Whiteline Suspension Control Arm- Engineered for dependable performance across a wide range of conditions
- Durable materials support long-term use and consistent reliability
- Designed for straightforward installation and dependable fit
- Kit contains: 2 Arms
-
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints (if applicable).
Whiteline Control arm – lower arm.- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
-
Adjust front camber and caster +-1.5deg on the Audi C8 platform with these forged aluminum adjustable control arms from SPC. OE style booted ball joints adn bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes four arms to replace both upper links on both sides of the vehicle. For the left hand (LH) side, use #81391. For the right hand (RH) side, use part number #81392. SPC Arms Feature: Forged 6061-T6 Aluminum contruction for maximized strength at a minimum weightOE style, maintenance free, booted ball joints Large 18mm threaded adjuster linksReplacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Kit includes both arms for both sides of the vehicle, order one kit per vehicle
- OE style bushing and ball joint maintain factory feel and noise reduction
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Comes with pinch bolt hardware
Reviews
There are no reviews yet.