0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

DKM Clutch BMW E46 M3 MS Twin Disc Clutch Kit w/Steel Flywheel (660 ft/lbs Torque)

The MS Twin Disc Clutch Kits are designed to hold around 900 Nm at the wheels with organic discs. The two organic disc setup provides additional contact surface area for higher torque capacity and a longer lifecycle. Each kit is comprised of a pressure plate, organic discs and a steel single mass flywheel. Additional parts such as pilot bearing/bushing, release bearing (when applicable), alignment tool and bolts are also included.
Twin 240mm organic disc setup provides additional contact surface and will hold 100% to 200% more torque capacity. For street and track use.

1,780.08 $

Out of stock
SKU MS-006-054
brand DKM Clutch

Description

The MS Twin Disc Clutch Kits are designed to hold around 900 Nm at the wheels with organic discs. The two organic disc setup provides additional contact surface area for higher torque capacity and a longer lifecycle. Each kit is comprised of a pressure plate, organic discs and a steel single mass flywheel. Additional parts such as pilot bearing/bushing, release bearing (when applicable), alignment tool and bolts are also included.
Twin 240mm organic disc setup provides additional contact surface and will hold 100% to 200% more torque capacity. For street and track use.

Specification

Weight 45.3 kg
Dimensions 15.5 × 13.7 × 5.5 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Unknown
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

t
units_per_sku

1
upc

850041702391
brand

DKM Clutch
part_number

MS-006-054

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 03005-TD7S-X

    Clutch Masters 2000 BMW 323I 2.5L E46 7.25in (Race/Street) 725 Series Twin-Disc Clutch Kit w/o Fly

    No Reviews

    “Race” (TD7R)2 ceramic rigid discs The Clutch Masters FX725 is a 7.25″ (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. Because of the minimal rotational mass the FX725 isn’t ideal for the street but with improvements in friction material over the years we have been able to create a solution that can handle occasional street driving. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track. The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover.
    Conversion kit, will not work with OEM flywheel, built to work exclusively with Clutch Masters flywheel

    1,504.35 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 02029-TD8S-S

    Clutch Masters 00-04 Audi A6/A6 Quattro 2.7L 850 Series Street Clutch w/Steel FW – 600ft/lbs Torque

    No Reviews

    The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the trongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003” of flex where as a cast or stamped unit can see as much as .030” of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn’t wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
    Conversion kit, will not work with OEM flywheel, built to work exclusively with Clutch Masters flywheel

    3,520.81 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com