Gauges & Pods

All AEM Tru-Boost gauge programming is done using the faceplate buttons and no laptop is required. AEM’s specially designed Boost Control Solenoid and all necessary hardware is included.Program Two Boost Levels + Scramble Boost Setting – Program two boost modes for different levels of performance (up to 80PSIg internal MAP sensor), and program a time-based scramble boost setting that is controlled using a switched input. You can also turn off the controller and use the gauge as a display.Change Wastegate Open Pressure-Ideal for reducing boost spikes and improving spool up.Display Boost Levels in PSIg (PSI), BAR or kPa (PAS) -See your boost in the units you prefer, and scale the 24 outer LEDs to match your peak boost levels for the perfect sweeping motion.Set Alarms and Display Peak Boost-Set the 24 green outer LEDs to flash based on boost pressure so you are alerted to an overboost condition. A ground output is included for triggering an optional LED warning light. Select the “B” button to see peak boost level and clear the value using the menu.Overboost Protection Built In-Protects your engine from an overboost condition by shutting the boost control solenoid off until it is reactivated by you through the buttons on the faceplate.Integrated Error Protection-Alerts you to a fault if the boost control solenoid is shorted or disconnected so you are never left guessing whether the Tru-BoostX is operational.Datalog using AEMnet CAN bus-Outputting channels over AEMnet provides so much more than just boost pressure! Send 13 channels of data over a 2-wire connection, including boost pressure, peak boost, boost target, boost scramble duty, overboost status, wastegate crack pressure, boost control solenoid status and more.
Tru-BoostX Controller Gauge with Boost Control Solenoid, 80 PSIg Internal MAP Sensor, Boost Hose Line and Wiring Harness.

• Overboost protection and programmable alarms, ground output for optional LED warning light
• Slim 0.825″ overall gauge depth and 0.200″ cup depth – mount them virtually anywhere!
• Wastegate open pressure setting for controlling boost spikes and faster spool
• On-board 80PSIg MAP sensor-no upgrade kit needed for high boost vehicles
• AEMnet CANbus-enabled for transmitting data to EMS or Data Logger
• Programmable center LED is 87% larger than original AEM gauges
• 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
• 24 green outer LEDs for quick reference to engine parameter
• Two boost level settings and scramble boost setting
• A boost display gauge and boost controller in one!
• Display boost levels in PSI, BAR or kPa
• Easy to program – no laptop required

Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM’s Wideband Controllers with X-Digital technology can reduce deadtime and improve the performance of your vehicle through more accurate AFR tuning. Deadtime is the delay between when exhaust gas composition changes and when that change is reported by the O2 sensor. While flow of exhaust gases can affect deadtime, it is not the only source. Often, the sensing element’s response to the gas is the largest contributor to deadtime.When tuning an engine using wideband AFR feedback control, deadtime affects the data you are looking at because it is reported in a different operating location than when it occurred. This means whatever changes you make to the base fueling will likely be in the wrong timeframe. This can be particularly dangerous to high cylinder pressure applications, and EFI systems that use feedback control.
X-Series Wideband UEGO AFR Sensor Controller Gauge with patented X-Digital Technology, Includes X-Series Wideband Controller Gauge, Bosch LSU 4.9 Sensor, Wiring Harnesses, Black Bezel, Reversible Black AFR-Lambda Faceplate, O2 Sensor Bung

• X-Series Wideband UEGO AFR Controller Gauges were the fastest responding wideband air/fuel ratio controllers in an independent test vs. 17 competitor wideband AFR controllers
• 0-5V & RS232 output for data logging and feedback control, AEMnet (CANbus) for data logging and daisy-chaining multiple controllers up to 16 cylinders
• Black bezel and black double-sided faceplate included (silver bezel/white faceplate option sold separately, PN 30-0300-ACC)
• Factory calibrated resistor does not require free-air calibration, but can be free-air calibrated
• User-configurable display for changing between AFR, Lambda, and O2%, and 3- or 4-digit display
• 52mm gauge diameter and slim 0.825″ gauge depth(Gauge cup depth only .200″ deep)
• Auto-Sensor Detection between AEM FAE and Bosch LSU 4.9 wideband sensors
• Patented X-Digital wideband technology (Patent 9,575,030)
• Compatible with supply voltages up to 16V
• Auto-dimming feature

In addition to over 25 parameters available for every single vehicle, there are also multiple application specific options to choose from. With the ability to run specific diagnostic tests as well as read and clear engine codes, the AGD can spot potential issues and ensure your vehicle is running at the best of its ability. In addition to the parameters of your choice, driving coach and vehicle performance data can be monitored. The AGD’s 5.5” multi-touch screen makes for a simple yet good-looking overview of the parameters most important to you. With customizable gauges and multiple different screen layouts available, each display can be tailored to your vehicle’s specific needs and aesthetic. Not only does it work seamlessly in conjunction with aFe POWER’s Scorcher BLUE modules, but the AGD also provides the ability to control multi-position tunes from third-party companies. The AGD simply plugs in to your vehicle’s OBDII port. All necessary cables for installation are included. Thanks to its magnetic base, the device can be easily removed from the windshield mount without unplugging any wires.
AGD 5-1/2 IN Digital Gauge Display Monitor Dodge/RAM/Ford/GM Diesel Trucks 08-23 L6-6.7L (td)/V8-6.4L/6.6L/6.7L (td)

• Bluetooth Connectivity Allows for use with aFe’s SCORCHER BLUE Modules as well as Third-Party Tunes
• Accurate On-the-Fly Monitoring with Over 25 Parameters for Every Vehicle
• Read and Clear DTCs and Spot any Potential Issues
• Includes Windshield Mount w/ Magnetic Base
• Simply Plugs Into Vehicle’s OBDII Port
• Customizable 5.5” Screen Display

Offering economically-priced, easy control of air spring load support solutions, LoadController (Panel, Single Path, Standard Duty) from Air Lift will have your vehicle back on the level in no time. For drivers of light- to medium-duty vehicles, LoadController provides the maximum convenience, for leveling on-the-go. LoadController offers convenient and easy adjustability of your air spring pressures, based on changes in load weight and road conditions. With an exclusive low pressure sensor that automatically activates if pressure drops to an unsafe level, you can be sure that your vehicle and load are protected, no matter what the road throws at you. With an in-cab gauge control panel, you can inflate your air springs at just the touch of a button. The easy-to-read pressure gauge allows for on-the-go adjustments, with one gauge and a simple inflate and deflate button. LoadController (Panel, Single Path, Standard Duty) is a single-path system, meaning that both air springs will in inflated or deflated at the same time, to the same pressure — offering easy and convenient load support, without the need to find a gas station or an air compressor! With the included, pre-assembled wiring harness, you’ll be able to have your vehicle level and on the road in only a matter of hours. The included, fully-illustrated installation manual provides clear instructions to make installation a breeze. As the leader in air suspension products for over 70 years, Air Lift is committed to delivering quality parts that last. To ensure the highest quality, longevity, and customer satisfaction, the system comes with a two-year warranty and a 60-day, no-questions-asked, money-back guarantee — not to mention the Air Lift reputation for great customer service and technical support, should you run into any snags in the installation process.
LoadController Compact provides one touch control of your air springs using a small easy to mount gauge. Never search for a gas station with a working compressor again!

• Exclusive low pressure sensor automatically adds air if pressure drops below 5 PSI
• Single Path system inflates or deflates air springs to the same pressures
• Two-year limited warranty and 60-day, money-back guarantee
• Two Year Limited Warranty And 60 Day Money Back Guarantee
• included standard duty compressor and wiring harness
• Easy to read and use pressure gauge located in cab
• Economically priced