Fuel Injectors - Single

The Edelbrock Pro-Flo 4 EFI Kit #35650 for 1970-1991 AMC 304, 360, 390, 401 CID engines is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Victor Jr.-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors are included along with distributor, wire harnesses and ECU. The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications. This kit uses 35 lb/hr injectors and is rated for 550 horsepower at 58 PSI of fuel pressure. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner’s initial programming. Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner then selects the most appropriate base calibration. Once the base calibration is set, the self-learning E-Tuner takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather. The E-Tuner provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for. No laptop tuning is required.The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
Edelbrock Pro-Flo 4 EFI kit #35650 for 1970-91 AMC 304, 360, 390, 401 c.i V8 engines. The EFI kit comes with a 4150-Style Single plane satin finish Victor Intake manifold and 35LbHr Injectors capable of 550 Max HP.
1970-1991 AMC 304; 360; 390; 401 CID engines

• New ECU Preloaded w/80 Dyno-Tuned Calibrations

The Edelbrock #15903 is a 60 pound-per-hour Fuel Injector for the E-Street TBI, ProFlo EFI, and Edelbrock supercharger systems. It is a compact body, Siemens injectors. They feature Bosch style connectors and are capable of up to 800 horsepower. The injectors are offered as a replacement for the E-Street TBI, #1572 supercharger, as an upgrade to our other supercharger kits, or as a supplemental part for our competition supercharger kits. It is a Black compact injector with a Blue colored band. Set of 8 Injector. For Single Injector use #51-4106
60 Lb/Hr Fuel Injector for Edelbrock ProFlo EFI, E-Street TBI, and Edelbrock’s S/C Systems Set of 8

• For Race Use Only

Edelbrock part #3522 is a set of (8), short body Siemens Deka High Impedance (12.5 ohms) fuel injector with a flow rate of 80 lb/hr (830cc) @ 43.5psi.
Edelbrock set of (8), short body Siemens Deka High Impedance (12.5 ohms) fuel injector, 80 Lb/hr

The Edelbrock #15901 injectors are Bosch style, standard long length (60mm O-ring to O-ring dimension), and are high impedance 50 lb/hr at 43.5 psi (300 Kpa). ?They have a dual spray pattern and use USCAR style connectors. ?These injectors can handle 100 psi without shutting off. These are included in our #1584, #1588, and #15986 E-Force supercharger systems.
50 Lb/Hr Fuel Injector for Edelbrock #1588, #1584 and #15986 E-Force S/C Systems Set of 8

• Increased Power

These new Precision-Flow high-impedance fuel injectors deliver the outstanding idle quality, unparalleled flow consistency, and durability essential for high-performance EFI applications. With a flow rate of 42 lb/hr (440cc/min) at 43.5 psi (3 BAR), these are the same high-quality fuel injectors used in the Edelbrock Pro-Flo 4, 675 horsepower-rated EFI Kits.

Engineered for excellent response and fuel atomization, Precision-Flow Fuel Injectors are manufactured and 100% flow tested to maintain the tightest tolerances in the industry. They undergo a multi-point dynamic flow testing process to ensure they meet the stated flow rate within +/- 2%. Testing at multiple pulse widths, rather than just at static flow, ensures consistent cylinder-to-cylinder fuel delivery throughout the entire operating range of an engine, not just at maximum capacity. The result is a smoother-running engine that is easier to tune and maintains a consistent cylinder-to-cylinder air-fuel ratio. They are a short-body style injector using a USCAR-style connector with a standard .550” O.D. lower O-ring and measure 1.480” from O-ring to O-ring. These injectors are designed for pre-pollution-controlled or race applications only.

Available as single injectors or in sets of 8, these Precision-Flow fuel injectors are the final piece of your fuel delivery system in any EFI-equipped application.
These new 42 lb/hr Precision-Flow high-impedance fuel injectors undergo multi-point dynamic flow testing to deliver outstanding idle quality, unparalleled flow consistency, and durability essential for high-performance EFI applications. 8EA

• Ensures that the injectors deliver the required fuel flow throughout their operating range and not just at max flow
• Maximizes fuel efficiency for clean, complete combustion
• Consistent fueling from cylinder to cylinder
• Multi-point Dynamic Flow Testing
• Excellent Fuel Atomization
• Flow matched to 2%

The Edelbrock part #358400 Pro-Flo 4 EFI System for Big-Block Chevy Oval Port engines is equipped with the latest in technology and features. The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 60 Lb/Hr injectors capable of 825 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. Best of all, the E-Tuner 4 app is free and can be downloaded from the Google Play Store, allowing you to use your personal Android based smart phone or tablet. Please Note “Kit 358400 DOES NOT include a 7″ Android tablet”. If you don’t have a compatible device, then we also offer kits that include a 7″ Android tablet with the E-Tuner 4 app installed. Pro-Flo 4 does not require laptop tuning.
Edelbrock Pro-Flo 4 EFI kit for Big-Block Chevy Oval Port engines. The EFI kit comes with a 4150-Style satin finish single plane intake and 60 Lb/Hr injectors capable of 950 HP with 58 p.s.i. fuel p.s.i. fuel pressure. No Tablet Included
Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L)

• New ECU Preloaded w/80 Dyno-Tuned Calibrations

The Edelbrock Pro-Flo 4 XT EFI Kit #35813 for 1986-earlier Small-Block Chevrolet engines is a complete bolt-on electronic fuel injection system featuring a black powder-coated XT intake manifold with large plenum and long tapered runners that comes ready to run with high-flow injectors, fuel rails and 90mm throttle body preassembled for you at the Edelbrock factory. This kit is rated at a maximum 550 horsepower with 35 lb/hr injectors and includes all supporting sensors, a wide-band O2 sensor and wire harnesses. Also included is a single-connection distributor designed to work specifically with Pro-Flo 4 providing fully sequential port injection and infinite control over ignition and fuel events under all conditions. Key Pro-Flo 4 advancements are its Self-Calibrating Fuel Map Technology, Wide-Band O2 Closed Loop Mixture Control, and new low-profile ECU with faster processor and upgraded Bluetooth chip for reliable connectivity with the E-Tuner app. The E-Tuner includes a Setup Wizard to guide you through setup and provides fuel and spark adjustability for complete control over the system. Pro-Flo 4 EFI #35813 for the Small-Block Chevy requires no laptop tuning. Minimal setup and tuning adjustments are required with base calibrations provided in the software. The ECU is self-learning and will continually adjust the fuel injection calibration for maximum performance by maintaining a specified target air-fuel ratio as you drive. The E-Tuner provides the ability to fine-tune air-fuel ratios, ignition curve, idle speed, acceleration fuel, fans, rev-limiter and more. Multiple displays let you monitor engine performance in real-time from inside or outside of the vehicle while retaining the simplicity that Pro-Flo 4 systems are known for. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
Edelbrock Pro-Flo 4 XT EFI System #35813 with Black Finish for 1986-Earlier Small-Block Chevrolet engines is a complete bolt-on electronic fuel injection system featuring a black-finished XT intake manifold.

The Edelbrock part #35970 Pro-Flo 4 EFI System for Pontiac 326-455 C.I. engines is equipped with the latest in technology and features. The EFI system comes complete with a traditional 4150-Style satin finish single plane intake manifold and 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get maximum performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started. Best of all, the E-Tuner 4 app is free and can be downloaded from the Google Play Store, allowing you to use your personal Android based smart phone or tablet. If you don’t have a compatible device, then we also offer kits that include a 7″ Android tablet with the E-Tuner 4 app pre-installed. Multiple dash displays are included to allow you to monitor engine vitals with an Android smart phone or tablet.Pro-Flo 4 does not require laptop tuning.
Edelbrock Pro-Flo 4 EFI System for Pontiac 326-455 CID engines. The EFI system comes with a 4150-Style satin finish single plane intake manifold and 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure.
Pontiac:-:326 (5.3L)/350 (5.7L)/389 (6.4L)/400 (6.6L)/421 (6.9L)/428 (7.0L)/455 (7.4)

• New ECU Preloaded w/80 Dyno-Tuned Calibrations

The Edelbrock part #35760 Pro-Flo 4 EFI System for 1986 & Earlier Small-Block Chevy engines is equipped with the latest technology and features. The EFI system comes complete with a traditional 4150-Style satin finish single plane intake manifold and 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get maximum performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started. Best of all, the E-Tuner 4 app is free and can be downloaded from the Google Play Store, allowing you to use your personal Android based smart phone or tablet. If you don’t have a compatible device, then we also offer kits that include a 7″ Android tablet with the E-Tuner 4 app pre-installed. Multiple dash displays are included to allow you to monitor engine vitals from your Android smart phone or tablet.Pro-Flo 4 does not require laptop tuning.
Edelbrock Pro-Flo 4 EFI System for 1986 & Earlier Small-Block Chevy engines. The EFI System comes with a 4150-Style satin finish single plane intake manifold & 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure.
Chevrolet:Small-Block Gen I:283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

• New ECU Preloaded w/80 Dyno-Tuned Calibrations

The Edelbrock #3853 is a 29 pound-per-hour Fuel Injector for the ProFlo EFI Systems. It is a compact injector with a White or Brown colored band. Set of 8 Injector.
29 Lb/Hr Fuel Injector for Edelbrock ProFlo EFI Systems Set of 8

• Better Power/Throttle Response/Economy