Edelbrock Pro Flo 4 EFI System Seq Port SBC 1986 & Earlier 625 Max HP 35lb/hr Satin Finish

The Edelbrock part #35860 Pro-Flo 4 EFI System for Big-Block Chevy Rectangle Port engines is equipped with the latest in technology and features. The EFI system comes complete with a traditional 4150-Style satin finish single plane intake manifold and 60 Lb/Hr injectors capable of 825 HP with 43 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get maximum performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started. Best of all, the E-Tuner 4 app is free and can be downloaded from the Google Play Store, allowing you to use your personal Android based smart phone or tablet. If you don’t have a compatible device, then we also offer kits that include a 7″ Android tablet with the E-Tuner 4 app pre-installed. Multiple dash displays are included to allow you to monitor engine vitals with an Android smart phone or tablet. Pro-Flo 4 does not require laptop tuning.
Edelbrock Pro-Flo 4 EFI System for Big-Block Chevy Rectangle Port engines. The EFI System comes with a 4150-Style satin finish single plane intake manifold and 60 Lb/Hr injectors capable of 950 HP with 58 p.s.i. fuel pressure.
Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L)

• New ECU Preloaded w/80 Dyno-Tuned Calibrations

MAP, O2 and IAT sensors. The Pro-Flo 4+ ECU provides mounting versatility with a compact weather-resistant housing and features a unique self-learning capability that adjusts the fuel map as you drive, providing optimum performance with no need for laptop tuning or costly dyno sessions. Setup is quick and easy thanks to Edelbrock’s E-Tuner 4 software for Android tablets and smartphones. Pro-Flo 4+ for the 2013-newer Gen III Hemi uses a speed-density fueling strategy with an included MAP and IAT sensor. A non-adjustable Alternator Control is set to regulate at 14.5 volts, and the system is SRV calibrated for 4,800 RPM, also not adjustable. The Pro-Flo 4+ system works with factory intake manifolds as well as most aftermarket intakes including Edelbrock and FAST. Short runner valve actuation is supported. Minimal tuning adjustments are required when the provided base calibration is used, giving you great performance right out of the box. Pro-Flo 4+ is covered by a 2-year warranty and is backed by the industry’s most extensive technical support team.”
Edelbrock Pro-Flo 4+ System #36120 is an EFI engine management system that greatly simplifies the process of installing a 2013-newer Chrysler 5.7L, 6.1L, 5.7L Eagle or 6.4L Hemi EFI engine into a non-EFI muscle car, truck or hot rod.

• Supports early 5.7L, 6.1L, 5.7L Eagle and 6.4L Gen III Hemi engines, Supports factory variable cam control on all Eagle engines
• Simple plug-and-play installation
• No laptop tuning required