Description
Skunk2 12-15 Honda Civic Si / 13-15 Acura ILX 72mm Electronic Throttle Body
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
Skunk2 12-15 Honda Civic Si / 13-15 Acura ILX 72mm Electronic Throttle Body
Skunk2 12-15 Honda Civic Si / 13-15 Acura ILX 72mm Electronic Throttle Body
Specification
| Weight | 3.7 kg |
|---|---|
| Dimensions | 8.1 × 6.2 × 4.5 cm |
| air_freight_prohibited | false |
| not_carb_approved | true |
| carb_acknowledgement_required | true |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| regular_stock | t |
| units_per_sku | 1 |
| upc | 841150914430 |
| brand | Skunk2 Racing |
| part_number | 309-05-7210 |
Related products
-
Test results on aFe’s Dynojet dyno showed power gains across the power band, topping out at +17 HP and +15 lb-ft torque at 6,000 rpm. Testing was conducted on a 2020 Mustang 5.0 comparing stock and the aFe Power BTB (all tests conducted using 91-octane fuel). No other modifications to the vehicle were made, so imagine the potential when you add in other performance enhancing products such as a cold air intake, tuner and cat-back exhaust! By the way, for you truck enthusiasts, this product also fits the F-Series (see application table for exact vehicle fitment). Not only did we increase the bore diameter from the stock 80 mm to 85 mm, we redesigned the throttle body from the ground up, aerodynamically improving the air flow path. Why 85 mm and not larger? 3 reasons: 1) At 85 mm, no custom tuning is required so this works right out of the box; 2) The 85 mm diameter provides a direct path into the 84 mm intake manifold opening, a larger diameter would require modification to the stock manifold, or use of an aftermarket one; and 3) The mounting diameter for your intake tube is only slightly increased, but it allows you to retain the stock intake tube or you can upgrade to a cold air intake without having any special adapters. Not wanting to be like the rest, aFe chose to make the BTB out of billet 6061-T6 aluminum, precision machined and capped off with a black anodized finish for that stealthy custom look. As a finishing touch, we have laser etched the aFe Power logo and throttle body size right on the top. The throttle plate is made of brass, the significance here is to eliminate the chance of galling against the aluminum body. Each throttle body is serialized for authenticity.
aFe POWER 85mm Throttle Body Ford Mustang GT 18-25 V8-5.0L- Billet Aluminum, precision machined, black anodized finish
- Retains OEM electronics and gearing mechanism
- Furnished complete, all hardware included
- Simple installation, less than 1 hour
- Perfect fitment, subtle, custom look
- Aerodynamically designed flow path
- Dyno proven HP and TQ gains
- No rough idling, No CEL
- 85mm Bore Diameter
- No tuning required
-
Skunk2 13-16 Subaru BRZ 72mm Electronic Throttle Body
-
The new Grams Drive-By-Wire Electronic Throttle Body for VW/Audi MKV/VI 70 mm is the perfect upgrade for the restrictive and trouble-prone factory 57 mm VW/Audi throttle body. The Grams throttle body is a Plug-n-Play direct OEM replacement that doesn’t require wiring or mounting adapters. These units are not remanufactured. Each throttle body includes all new components including a CNC machined billet 6061-T6 aluminum housing with a precision-honed oversized bore, a high-torque servo motor, and a proprietary Non-Contact Hall Effect TPS sensor. To ensure the best performance, throttle response and drivability, each TPS sensor is calibrated to meet the specific requirements of the vehicles engine management system. The Grams electronic throttle body is the perfect upgrade for both modified and stock engines with increased airflow and reliability demands.
Drive-By-Wire Electronic Throttle Body; Bore Size 70mm ID; Incl. Plug And Play; No Adapters Needed;- 60 Percent Increase In AirFlow Over Stock Throttle Body
- Factory Programmable Non-Contact Hall Effect TPS
- CNC Machined Billet 6061-T6 Aluminum Housing
- High-Torque And Precision Servo Motor
- Precision Honed Oversized 70mm Bore
- Plug-n-Play; No Adapters Needed
- Optimized TPS Response Curve
- Aluminum Throttle Plate
-
This aFe POWER 90mm Throttle Body and adapter kit improves engine air flow over the stock 80mm throttle body. The extra air flow will increase horsepower and throttle response. Performance gains will be more noticeable as more upgrades are added to the vehicle. All adapters are constructed from 6061-T6 billet aluminum and are precision machined for light weight, high strength, and perfect fit and finish. The Serrated/Swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel creating a more complete combustion cycle increasing horsepower, torque and improving throttle response. This aFe POWER 90mm throttle body kit uses all factory mounting locations providing stability and a hassle-free installation. All needed hardware is included with the kit. It is recommended to install this throttle body kit with an aFe cold air intake. A new larger coupler at the throttle body is recommended for easier installation (coupler I.D. of 3.75” or 95mm at the throttle body).
aFe POWER 90mm Throttle Body Dodge Challenger/Charger 13-23/Chrysler 300 13-23 V8-5.7L/6.4L- More Power and Better Throttle Response
- 90mm Bore Diameter, No Tuning Required
- Direct Bolt-On For Simple Installation
- Plug-n-play Electronics
- Billet Aluminum Adapter
- Gasket Included
Reviews
There are no reviews yet.