0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

Edelbrock EFI Throttle Body Pro-Flo XT 90mm Polished

The Edelbrock 90mm single bore throttle body is intended for Pro-Flo XT and EFI Victor Elbow applications. It has provisions for either LS1 or LS2 mounting bolt patterns. The throttle body uses LS1 style TPS and IAC. It offers better idle control than other 90mm throttle bodies, because of the addition of an idle bleed screw. By using the bleed screw to create a base amount of idle air flow instead of throttle tip-in, the TPS signal is unaffected. Polished Finish
The Edelbrock #38691, 90mm single bore throttle body, is intended for Pro-Flo XT and EFI Victor Elbow applications. It has provisions for either LS1 or LS2 mounting bolt patterns. The throttle body uses LS1 style TPS and IAC. Polish Finish

  • All Stock Sensors And Lines Fit Like Stock

799.60 $

Out of stock
SKU 38691
brand Edelbrock

Description

The Edelbrock 90mm single bore throttle body is intended for Pro-Flo XT and EFI Victor Elbow applications. It has provisions for either LS1 or LS2 mounting bolt patterns. The throttle body uses LS1 style TPS and IAC. It offers better idle control than other 90mm throttle bodies, because of the addition of an idle bleed screw. By using the bleed screw to create a base amount of idle air flow instead of throttle tip-in, the TPS signal is unaffected. Polished Finish
The Edelbrock #38691, 90mm single bore throttle body, is intended for Pro-Flo XT and EFI Victor Elbow applications. It has provisions for either LS1 or LS2 mounting bolt patterns. The throttle body uses LS1 style TPS and IAC. Polish Finish

  • All Stock Sensors And Lines Fit Like Stock

Specification

Weight 3 kg
Dimensions 9 × 5.8 × 3.8 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

false
units_per_sku

1
upc

85347386918
brand

Edelbrock
part_number

38691

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 46-39103

    aFe POWER 03-09 Toyota 4Runner V6 4.0L / 10-14 Toyota FJ Cruiser V6 4.0L 76mm Billet Throttle Body

    No Reviews

    This aFe POWER 76mm Throttle Body and adapter kit improves engine air flow over the stock 65mm throttle body. The extra air flow will increase horsepower and throttle response. This kit will work with OEM or aFe cold air intakes. Performance gains will be more noticeable as more upgrades are added to the vehicle. All adapters are constructed from 6061-T6 billet aluminum and are precision machined for light weight, high strength, and perfect fit and finish. The Serrated/Swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel creating a more complete combustion cycle increasing horsepower, torque and improving throttle response. This aFe POWER 76mm throttle body kit uses all factory mounting locations providing stability and a hassle-free installation. All needed hardware is included with the kit. Idle will run high on some vehicles but will readjust once the ECU learns to properly control the idle (this can take up to 800 miles on some vehicles).
    aFe POWER 76mm Throttle Body Toyota 4Runner/FJ/Tacoma/Tundra 03-15 (1GR-FE Single VVT-i)

    • More Power and Better Throttle Response
    • 76mm Bore Diameter, No Tuning Required
    • Direct Bolt-On For Simple Installation
    • Hardware and Gasket Included
    • Plug-n-play Electronics
    • Billet Aluminum Adapter
    491.58 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 46-39105

    aFe 11-23 Dodge Challenger / 11-23 Dodge Charger 80mm Throttle Body

    No Reviews

    This aFe POWER 80mm Throttle Body and adapter kit improves engine air flow over the stock 74mm throttle body. The extra air flow will increase horsepower and throttle response. Performance gains will be more noticeable as more upgrades are added to the vehicle. All adapters are constructed from 6061-T6 billet aluminum and are precision machined for light weight, high strength, and perfect fit and finish. The Serrated/Swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel creating a more complete combustion cycle increasing horsepower, torque and improving throttle response. This aFe POWER 80mm throttle body kit uses all factory mounting locations providing stability and a hassle-free installation. All needed hardware is included with the kit. It is recommended to install this throttle body kit with an aFe cold air intake. A new larger coupler at the throttle body is recommended for easier installation (coupler I.D. of 3.50″ or 89mm at the throttle body).
    aFe POWER 80mm Throttle Body Dodge Challenger/Charger 11-23/Chrysler 300 11-23 V6-3.6L

    • More Power and Better Throttle Response
    • Direct Bolt-On For Simple Installation
    • Harness, Hardware and Gasket Included
    • Plug-n-play Electronics
    • Billet Aluminum Adapter
    • 80mm Bore Diameter
    • No Tuning Required
    568.26 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com