0
2
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
2 Shopping Cart 815.10 $

aFe 08-12 Dodge Challenger / 06-12 Dodge Charger 90mm Throttle Body

This aFe POWER 90mm Throttle Body and adapter kit improves engine air flow over the stock 80mm throttle body. The extra air flow will increase horsepower and throttle response. Performance gains will be more noticeable as more upgrades are added to the vehicle. All adapters are constructed from 6061-T6 billet aluminum and are precision machined for light weight, high strength, and perfect fit and finish. The Serrated/Swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel creating a more complete combustion cycle increasing horsepower, torque and improving throttle response. This aFe POWER 90mm throttle body kit uses all factory mounting locations providing stability and a hassle-free installation. All needed hardware is included with the kit.
aFe POWER 90mm Throttle Body Dodge Challenger 08-12/ Charger 06-12/ Chrysler 300 05-12 V8-5.7L/6.1L/6.4L

  • More Power and Better Throttle Response
  • Direct Bolt-On For Simple Installation
  • Plug-n-play Electronics
  • Billet Aluminum Adapter
  • 90mm Bore Diameter
  • No Tuning Required
  • Gasket Included

685.51 $

Out of stock
SKU 46-39112
brand aFe

Description

This aFe POWER 90mm Throttle Body and adapter kit improves engine air flow over the stock 80mm throttle body. The extra air flow will increase horsepower and throttle response. Performance gains will be more noticeable as more upgrades are added to the vehicle. All adapters are constructed from 6061-T6 billet aluminum and are precision machined for light weight, high strength, and perfect fit and finish. The Serrated/Swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel creating a more complete combustion cycle increasing horsepower, torque and improving throttle response. This aFe POWER 90mm throttle body kit uses all factory mounting locations providing stability and a hassle-free installation. All needed hardware is included with the kit.
aFe POWER 90mm Throttle Body Dodge Challenger 08-12/ Charger 06-12/ Chrysler 300 05-12 V8-5.7L/6.1L/6.4L

  • More Power and Better Throttle Response
  • Direct Bolt-On For Simple Installation
  • Plug-n-play Electronics
  • Billet Aluminum Adapter
  • 90mm Bore Diameter
  • No Tuning Required
  • Gasket Included

Specification

Weight 3.4 kg
Dimensions 8.2 × 8.2 × 8.2 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

t
units_per_sku

1
upc

802959411513
brand

aFe
part_number

46-39112

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: G09-09-0700

    Grams Performance VW MKIV DBW Throttle Body – Black

    No Reviews

    A larger throttle body is key to producing additional power throughout the power band on modified engines with increased airflow demands. The new Grams Performance and Design MKIV throttle body features a large 70mm bore, which results in significant horsepower gains throughout the power band on heavily modified, naturally aspirated applications and even more on forced induction ones.
    Drive-By-Wire Electronic Throttle Body; Bore Size 70mm ID; Incl. Plug And Play; No Adapters Needed;

    • Provides Additional Power Throughout The Power Band
    • Significant Horsepower Gains
    • Increased Airflow
    • Large 70mm Bore
    507.57 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    Black 65mm scope objective lens housing with mounting clips and branding visible on top meniscus lens exposed
    SKU: 46-39101

    aFe 18-21 Ford Mustang GT 5.0L 85mm Billet Throttle Body

    No Reviews

    Test results on aFe’s Dynojet dyno showed power gains across the power band, topping out at +17 HP and +15 lb-ft torque at 6,000 rpm. Testing was conducted on a 2020 Mustang 5.0 comparing stock and the aFe Power BTB (all tests conducted using 91-octane fuel). No other modifications to the vehicle were made, so imagine the potential when you add in other performance enhancing products such as a cold air intake, tuner and cat-back exhaust! By the way, for you truck enthusiasts, this product also fits the F-Series (see application table for exact vehicle fitment). Not only did we increase the bore diameter from the stock 80 mm to 85 mm, we redesigned the throttle body from the ground up, aerodynamically improving the air flow path. Why 85 mm and not larger? 3 reasons: 1) At 85 mm, no custom tuning is required so this works right out of the box; 2) The 85 mm diameter provides a direct path into the 84 mm intake manifold opening, a larger diameter would require modification to the stock manifold, or use of an aftermarket one; and 3) The mounting diameter for your intake tube is only slightly increased, but it allows you to retain the stock intake tube or you can upgrade to a cold air intake without having any special adapters. Not wanting to be like the rest, aFe chose to make the BTB out of billet 6061-T6 aluminum, precision machined and capped off with a black anodized finish for that stealthy custom look. As a finishing touch, we have laser etched the aFe Power logo and throttle body size right on the top. The throttle plate is made of brass, the significance here is to eliminate the chance of galling against the aluminum body. Each throttle body is serialized for authenticity.
    aFe POWER 85mm Throttle Body Ford Mustang GT 18-25 V8-5.0L

    • Billet Aluminum, precision machined, black anodized finish
    • Retains OEM electronics and gearing mechanism
    • Furnished complete, all hardware included
    • Simple installation, less than 1 hour
    • Perfect fitment, subtle, custom look
    • Aerodynamically designed flow path
    • Dyno proven HP and TQ gains
    • No rough idling, No CEL
    • 85mm Bore Diameter
    • No tuning required
    950.34 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 309-05-1030

    Skunk2 Alpha Series Honda/Acura (D/B/H/F Series) 66mm Cast Throttle Body (OEM Look)

    No Reviews

    Skunk2 is proud to introduce its 66mm Alpha Series Throttle Body for Hondas B-series engines (also compatible with D-, F-, and H-series) in its exclusive, fine shot-blasted surface finish. Skunk2’s 66mm Alpha Series Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price. Skunk2’s Alpha Series Throttle Bodies are precision die-cast from high-quality materials and include features previously offered only in our Pro Series line, like countersunk, stainless steel mounting bolts, solid brass throttle plates, fully machined bores, and idle adjustment screws for fine tuning. All Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesnt just provide more flow but retains smooth drivability and OEM throttle characteristics. A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2’s Alpha Series Throttle Bodies for B-series engines feature a large, 66mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones. Skunk2’s 66mm Alpha Series Throttle Body offers Skunk2 performance, industry-leading customer service, and a limited-lifetime warranty policy, all at a price comparable to lesser budget-minded throttle bodies. Unlike the budget-minded throttle bodies, though, only Skunk2 Alpha Series Throttle Bodies ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away.
    Alpha Series Throttle Body; B/D/F/H Series; 66mm TB Opening; Idle Adjust. Screw; Retains Coolant Connections; For Use w/Skunk2 Pro Series Intake Manifold Or Similar; Cast Alum.;

    • Sealed Ball Bearings For Smooth Operation
    • Precision Machined Brass Throttle Plate
    • Idle Adjustment Screws For Fine Tuning
    • Fine Shot-Blasted Surface Finish
    • Compatible w/OEM Throttle Cable
    • Gasket And Hardware Included
    • Precision Die-Cast Aluminum
    • 66mm Honda B/D/F/H Engines
    191.24 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 2 Cart Garage
support@ucperformance.com