0
3
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
3 Shopping Cart 510.49 $

SPL Parts Porsche 996/997 Rear Toe Arms with Toe Eccentric Lockouts

Porsche Rear Toe Arms (RTA) increase stability and response by eliminating bushing deflection and offer a wide range of toe and bump steer adjustment. When you lower your 996/997, the factory links create too much toe-in that cannot be adjusted out. This creates handling problems and excessive tire wear. These arms are designed for use in high performance street and race vehicles
Large toe adjustment range. Eliminates unwanted toe bump due to bushing deflection and improper kinematics.

  • Proudly made, engineered, and assembled in the USA.

764.10 $

Out of stock
SKU SPL RTAEL 996
brand SPL Parts

Description

Porsche Rear Toe Arms (RTA) increase stability and response by eliminating bushing deflection and offer a wide range of toe and bump steer adjustment. When you lower your 996/997, the factory links create too much toe-in that cannot be adjusted out. This creates handling problems and excessive tire wear. These arms are designed for use in high performance street and race vehicles
Large toe adjustment range. Eliminates unwanted toe bump due to bushing deflection and improper kinematics.

  • Proudly made, engineered, and assembled in the USA.

Specification

Weight 10 kg
Dimensions 16 × 7 × 5 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Unknown
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

false
units_per_sku

1
upc

SPL RTAEL 996
brand

SPL Parts
part_number

SPL RTAEL 996

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: SPL TR E9X

    SPL Parts 06-13 BMW 3 Series/1 Series (E9X/E8X)/F8X Front Tension Rods

    No Reviews

    BMW E9X/E8X/F8X Tension Rods (TR) provide a wide range of front caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right caster. Low-friction, smooth articulating FK Spherical Bearings eliminate the stock mushy rubber bushing to provide a more responsive steering feel. Anti dive geometry can also be tuned with the use of our stainless steel spacers

    Our parts are engineered for maximum performance. Billet Aluminum alloy 2024 hex rods are precision CNC machined and gun drilled to reduce unsprung weight while maintaining high strength and stiffness. Our exclusive 360 degree Rotating Clamp design allows for easy access to quickly and precisely locking in your desired alignment settings. Blue Anodized Titanium hardware shaves even more unsprung weight from the arms and offers superior strength.

    FK Bearings Rod Ends are manufactured in Connecticut. The JMX is an upgraded harden rod end used for superior added strength. Featuring a Teflon liner to provide quiet operation, low friction, smooth articulation and eliminates bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics. The operating temperatures of the liner ranges from -65º to 325º F, offering robust reliability for both street and track use.

    Sold as a pair.

    Made in the USA.
    SPL BMW E9X / E8X / F8X Adjustable Tension Rods

    • Proudly made, engineered, and assembled in the USA.
    629.10 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SPL RTR F8X

    SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Traction Links

    No Reviews

    BMW F8X/G8X Rear Traction Links (RTR) for the M2 / M3 / M4 increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Our length adjustable links allow fine tuning of rear bumpsteer and anti squat characteristics. These arms are designed for use in high performance street and race vehicles.

    Black Anodized and gun drilled 2024 Aluminum links along with our 360 degree Rotating Clamp design allow for quick and precise adjustment. Blue Anodized Titanium Socket Head Cap Screws shaves even more unsprung weight without compromising strength.

    FK Bearings rod ends manufactured in Connecticut feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminates bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics. The operating temperatures of the liner ranges from -65º to 325ºF, offering robust reliability for both street and track use.

    Sold as a pair.

    Made in the USA.
    SPL BMW F8X Rear Adjustable Traction Arms

    • Proudly made, engineered, and assembled in the USA.
    404.10 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SPL RTR G29

    SPL Parts 2020+ Toyota GR Supra (A90) / 2019+ BMW Z4 (G29) Rear Traction Links

    No Reviews

    SPL Parts Rear Traction Links (RTR) increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Our length adjustable links allow fine tuning of rear bumpsteer and anti squat characteristics. These arms are designed for use in high performance street and race vehicles.

    Our Rear Traction Links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with Blue Anodized Titanium socket head cap screws and our 360 degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. Long gone are the days of fumbling with wrenches to tighten jam nuts while trying to trying to keep your bearings oriented correctly. A simple 3/16″ allen key is all that is required to lock down your alignment settings!

    FK Bearings rod ends manufactured in Connecticut feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminates bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics. The operating temperatures of the liner ranges from -65º to 325ºF, offering robust reliability for both street and track use.

    Sold as a pair.

    Made in the USA.
    SPL Toyota Supra A90 / BMW Z4 G29 Rear Adjustable Traction Arms

    • Proudly made, engineered, and assembled in the USA.
    404.10 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 76DB-G8X-A3-101S

    Moton BMW G8X Control Arm Bearing – Set of 2

    No Reviews

    The MOTON Suspension Uniball kit serves as a superior alternative to replace the front thrust arm rubber bushings.
    Unlike the stock bushings found in many cars, which prioritize driving comfort but can result in a disconnected sensation from the car’s actions, the standard bushings permit substantial movement, leading to wear, fatigue, cracks, and eventual failure.
    This kit is meticulously crafted to enhance the vehicle’s handling and control by minimizing bushing deflection and movement. Furthermore, it grants complete authority over wheel alignment. Constructed from top-grade anodized aluminum, it’s suitable for both motorsport and regular street use.

    Key advantages of the MOTON suspension Control arm Uniball replacement kit include:
    1. Enhanced Steering Precision: Experience improved steering behavior, resulting in more precise control.
    2. Sharper Turn-in Response: This kit delivers a more responsive turn-in, making the car feel agile and nimble.
    3. Increased Feedback: Gain better feedback from the vehicle, allowing you to connect more intimately with its actions.
    4. Superior Control and Handling: Achieve superior control and handling, enhancing your driving experience.
    5. Extended Bushing Lifespan: The Uniball kit boasts robust construction, ensuring a longer service life compared to standard bushings.
    Lifetime usage: It offers a lifetime of usability thanks to its rebuildable design.
    The MOTON Suspension Uniball kit replaces front thrust arm rubber bushings, enhancing control, minimizing deflection, and offering precise alignment. Made from anodized aluminum for motorsport and street use.
    Part number OEM arm Left 31108095667 arm right 31108095668

    • Set of 2 control arm bearings
    • Will fit in OEM control arm.
    405.00 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 3 Cart Garage
support@ucperformance.com