Description
Hotchkis 66-72 Dodge Charger Upper Tubular A-Arms
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
Hotchkis 66-72 Dodge Charger Upper Tubular A-Arms
Hotchkis 66-72 Dodge Charger Upper Tubular A-Arms
Specification
| Weight | 17.6 kg |
|---|---|
| Dimensions | 20.4 × 14.7 × 7.2 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 810361030192 |
| brand | Hotchkis |
| part_number | 1110U-A |
Related products
-
SPL Parts 2021+ BMW G80 M3/ G82/G83 M4 / G87 M2 Adj Rear Upper Camber/Lateral & Upper Traction Links
BMW G8X adjustable Rear Upper Arms (RUA) are an absolute necessity to maintain proper rear camber and reduce tire wear on the street and track. The stock BMW setup has an aggressive camber curve through bump travel, which is very apparent on lowered cars. Excess negative camber causes premature tire wear on the inside edge, and reduced traction on acceleration while too little camber will limit rear grip while cornering. Our Rear Upper Arms provide a wide adjustment range for precise rear camber alignment that is easily optimized for street or track driving while eliminating bushing deflection with smooth articulating Teflon lined rod ends in place of the soft factory rubber bushings. Our kit replaces the factory links commonly referred to as the rear wishbone and rear guide links.
BMW G8X Rear Upper Arms include gun drilled 6061-T6 Aluminum traction links to reduce weight, as well as a 6061-T6 Billet Aluminum curved rear upper camber arm that are Black Anodized to prevent corrosion and provide a durable finish. Our exclusive 360 degree 6061-T6 Aluminum Rotating Clamp design allows for quick, precise adjustment on the dogbone, while our curved upper arm utilizes our innovative double adjuster design that allows for easy and precise camber adjustment without removing the arm from the vehicle. Our Clamps tightened down with Blue Anodized Titanium Socket Head Cap Screws gives easy access to adjust camber settings, shaving off even more unsprung weight without compromising strength.
SPL BMW G8X M3 / M4 Rear Adjustable Upper Arms- Proudly made, engineered, and assembled in the USA.
-
BMW F8X/G8X Rear Traction Links (RTR) for the M2 / M3 / M4 increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Our length adjustable links allow fine tuning of rear bumpsteer and anti squat characteristics. These arms are designed for use in high performance street and race vehicles.
Black Anodized and gun drilled 2024 Aluminum links along with our 360 degree Rotating Clamp design allow for quick and precise adjustment. Blue Anodized Titanium Socket Head Cap Screws shaves even more unsprung weight without compromising strength.
FK Bearings rod ends manufactured in Connecticut feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminates bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics. The operating temperatures of the liner ranges from -65º to 325ºF, offering robust reliability for both street and track use.
Sold as a pair.
Made in the USA.
SPL BMW F8X Rear Adjustable Traction Arms- Proudly made, engineered, and assembled in the USA.
-
BMW F8X Rear Toe Arms (RTA) increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will affect toe settings and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack the precision and range that SPL Parts Rear Toe Links offer. Black Anodized and gun drilled 2024 Aluminum main links along with our 360 degree Rotating Clamp design allow for quick and precise adjustment. 3 piece FK Bearings Rod Ends manufactured in Connecticut feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminates bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics. The operating temperatures of the liner ranges from -65º
SPL BMW F8X Rear Toe Arms + Eccentric Lockout- Proudly made, engineered, and assembled in the USA.
-
Improve the performance of your Tiguan. The Whiteline Camber Adjustable Roll Center Correcting Performance Ball Joint Kit is designed to correct roll center geometry with specific ball-joints. This kit is perfect for sprinted driving and track days with a fine tuning chamber. The Camber Adjustable Roll Center Correcting Performance Ball Joint Kit optimizes the front roll center resulting in a substantial increase to the front roll resistance. Reduction in suspension compression when cornering is improved with this Whiteline kit. This Whiteline Kit ensures top performance to improve cornering speeds and tire life. The Camber Adjustable Roll Center Correcting Performance Ball Joint Kit help to improve tire contact with the road to enhance front tire grip. This creates a safer performance and ride comfortability. Whiteline has designed these ball joints to be compatible with OEM and aftermarket suspension components. This kit comes with two ball joints. The Whiteline Camber Adjustable Roll Center Correcting Performance Ball Joint Kit is compatible with 2009-2017 Tiguan S/SEL/Track & Fun; 2009-2016 Tiguan SE; 2009-2013 Tiguan Native; 2009-2010 Tiguan Base; 2013-2017 Tiguan Base; 2012-2017 Tiguan Sport & Style; 2014-2016 Tiguan R-Line models.
Whiteline Roll centre/bump steer – correction kit.- Vehicle Compatibility: Fits 2009-2017 Tiguan S/SEL/Track & Fun; 2009-2016 Tiguan SE; 2009-2013 Tiguan Native; 2009-2010 Tiguan Base; 2013-2017 Tiguan Base; 2012-2017 Tiguan Sport & Style; 2014-2016 Tiguan R-Line
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- High Durability: The Whiteline Camber Adjustable Roll Center Correcting Performance Ball Joint Kit is made out of high-strength steel to enhance durability
- Buy With Confidence: This Camber Adjustable Roll Center Correcting Performance Ball Joint Kit is backed with a 3 year 60,000 mile warranty
- Improved Handling: This Whiteline kit enhances front-end grip and reduces bump steer to improve handling and steering response
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
- Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
- Geometry Correcting: This Whiteline Kit corrects the front roll center geometry for lowered vehicles
- Install guide included providing detailed instructions on how to install your new purchase .
- Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.
Reviews
There are no reviews yet.