0
1
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
1 Shopping Cart 770.23 $

aFe Control 24-26 Toyota Tacoma Upper Control Arms – Set (Red)

Enhance your Toyota’s handling performance and style with the all-new aFe CONTROL Upper Control Arms. Although the factory control arms may be adequate with most front lift kits, the appearance of the OE arm leaves little to be desired. CNC machined from 6061-T6 billet aluminum, our control arm is beautifully sculpted with a unique design that is sure to set your truck apart from the crowd. Looks aren’t everything. aFe CONTROL has meticulously engineered the arms to have full camber and caster adjustment, including more than enough bearing articulation and coil spring clearance for a variety of lift kits. Whether you’re on a road trip with the family or off-roading on the trails, aFe CONTROL will get you there. The control arm body is CNC machined from 6061-T6 billet aluminum. Unique top design and machined bottom pockets for weight savings. The arm is finished with red anodizing with laser engraved logo. Heavy-duty 7/8” hard chrome plated rod end chassis mounts allow for versatile camber and caster adjustments allowing you to align your truck with ease for both factory ride height and lifted trucks. Equipped with our high articulating 1.25” uniball, the aFe control arm can easily operate with zero binding for lifted trucks with increased down travel. aFe CONTROL uniballs are PTFE lined for long lasting, quiet operation. Machined out of 6061-T6 aluminum, our black anodized bearing cap will help keep the dirt and moisture from accumulating on top of the uniball.
aFe CONTROL Billet Uniball Upper Control Arm Kit Red Toyota Tacoma 24-26 / 4Runner 25-26 L4-2.4L (t)

  • Direct Fit Installation Requires No Modifications
  • Red Anodized Finish with Laser Engraved Logo
  • CNC Machined 6061-T6 Billet Aluminum Arms
  • Works with Factory and Lifted Height
  • All Necessary Hardware Included
  • Camber and Caster Adjustable

1,736.27 $

SKU 460-72T006-R
brand aFe
Add to wishlist Add to compare

Description

Enhance your Toyota’s handling performance and style with the all-new aFe CONTROL Upper Control Arms. Although the factory control arms may be adequate with most front lift kits, the appearance of the OE arm leaves little to be desired. CNC machined from 6061-T6 billet aluminum, our control arm is beautifully sculpted with a unique design that is sure to set your truck apart from the crowd. Looks aren’t everything. aFe CONTROL has meticulously engineered the arms to have full camber and caster adjustment, including more than enough bearing articulation and coil spring clearance for a variety of lift kits. Whether you’re on a road trip with the family or off-roading on the trails, aFe CONTROL will get you there. The control arm body is CNC machined from 6061-T6 billet aluminum. Unique top design and machined bottom pockets for weight savings. The arm is finished with red anodizing with laser engraved logo. Heavy-duty 7/8” hard chrome plated rod end chassis mounts allow for versatile camber and caster adjustments allowing you to align your truck with ease for both factory ride height and lifted trucks. Equipped with our high articulating 1.25” uniball, the aFe control arm can easily operate with zero binding for lifted trucks with increased down travel. aFe CONTROL uniballs are PTFE lined for long lasting, quiet operation. Machined out of 6061-T6 aluminum, our black anodized bearing cap will help keep the dirt and moisture from accumulating on top of the uniball.
aFe CONTROL Billet Uniball Upper Control Arm Kit Red Toyota Tacoma 24-26 / 4Runner 25-26 L4-2.4L (t)

  • Direct Fit Installation Requires No Modifications
  • Red Anodized Finish with Laser Engraved Logo
  • CNC Machined 6061-T6 Billet Aluminum Arms
  • Works with Factory and Lifted Height
  • All Necessary Hardware Included
  • Camber and Caster Adjustable

Specification

Weight 22.6 kg
Dimensions 16.6 × 16.4 × 11 cm
air_freight_prohibited

false
not_carb_approved

false
carb_acknowledgement_required

false
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

t
units_per_sku

1
upc

802959008478
brand

aFe
part_number

460-72T006-R

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: SPL RTR G29

    SPL Parts 2020+ Toyota GR Supra (A90) / 2019+ BMW Z4 (G29) Rear Traction Links

    No Reviews

    SPL Parts Rear Traction Links (RTR) increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Our length adjustable links allow fine tuning of rear bumpsteer and anti squat characteristics. These arms are designed for use in high performance street and race vehicles.

    Our Rear Traction Links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with Blue Anodized Titanium socket head cap screws and our 360 degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. Long gone are the days of fumbling with wrenches to tighten jam nuts while trying to trying to keep your bearings oriented correctly. A simple 3/16″ allen key is all that is required to lock down your alignment settings!

    FK Bearings rod ends manufactured in Connecticut feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminates bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics. The operating temperatures of the liner ranges from -65º to 325ºF, offering robust reliability for both street and track use.

    Sold as a pair.

    Made in the USA.
    SPL Toyota Supra A90 / BMW Z4 G29 Rear Adjustable Traction Arms

    • Proudly made, engineered, and assembled in the USA.
    553.33 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SPL TR E9X

    SPL Parts 06-13 BMW 3 Series/1 Series (E9X/E8X)/F8X Front Tension Rods

    No Reviews

    BMW E9X/E8X/F8X Tension Rods (TR) provide a wide range of front caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right caster. Low-friction, smooth articulating FK Spherical Bearings eliminate the stock mushy rubber bushing to provide a more responsive steering feel. Anti dive geometry can also be tuned with the use of our stainless steel spacers

    Our parts are engineered for maximum performance. Billet Aluminum alloy 2024 hex rods are precision CNC machined and gun drilled to reduce unsprung weight while maintaining high strength and stiffness. Our exclusive 360 degree Rotating Clamp design allows for easy access to quickly and precisely locking in your desired alignment settings. Blue Anodized Titanium hardware shaves even more unsprung weight from the arms and offers superior strength.

    FK Bearings Rod Ends are manufactured in Connecticut. The JMX is an upgraded harden rod end used for superior added strength. Featuring a Teflon liner to provide quiet operation, low friction, smooth articulation and eliminates bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics. The operating temperatures of the liner ranges from -65º to 325º F, offering robust reliability for both street and track use.

    Sold as a pair.

    Made in the USA.
    SPL BMW E9X / E8X / F8X Adjustable Tension Rods

    • Proudly made, engineered, and assembled in the USA.
    861.43 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SPL RTR F8X

    SPL Parts 2014+ BMW M2/M3/M4 (F8X) Rear Traction Links

    No Reviews

    BMW F8X/G8X Rear Traction Links (RTR) for the M2 / M3 / M4 increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Our length adjustable links allow fine tuning of rear bumpsteer and anti squat characteristics. These arms are designed for use in high performance street and race vehicles.

    Black Anodized and gun drilled 2024 Aluminum links along with our 360 degree Rotating Clamp design allow for quick and precise adjustment. Blue Anodized Titanium Socket Head Cap Screws shaves even more unsprung weight without compromising strength.

    FK Bearings rod ends manufactured in Connecticut feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminates bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics. The operating temperatures of the liner ranges from -65º to 325ºF, offering robust reliability for both street and track use.

    Sold as a pair.

    Made in the USA.
    SPL BMW F8X Rear Adjustable Traction Arms

    • Proudly made, engineered, and assembled in the USA.
    553.33 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SPL RLL E36

    SPL Parts 90-00 BMW 3 Series (E36) Rear Camber Links

    No Reviews

    BMW E36 Rear Camber Arms (RLL) allow for an increased range of rear camber adjustment, necessary for lowered cars and performance alignments to maintain proper rear camber and reduce tire wear on the street and track. This provides increased stability and predictability to the rear suspension for tighter handling. Our Rear Camber Links feature gun drilled 6061-T6 Aluminum center links, clamps, and clevises, along with Blue Anodized Titanium socket head cap screws and our 360 degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. Long gone are the days of fumbling with wrenches to tighten jam nuts while trying to trying to keep your bearings oriented correctly. A simple 3/16″ allen key is all that is required to lock down your alignment settings! Custom 3 piece FK Bearings Rod Ends manufactured in Connecticut feature a Teflon liner to provide quiet operation, low friction, smooth articulation and eliminates bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics. The operating temperatures of the liner ranges from -65&ordm
    SPL BMW E36 Rear Adjustable Camber Arms

    • Proudly made, engineered, and assembled in the USA.
    553.33 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 1 Cart Garage
support@ucperformance.com