Made from a high quality aluminum alloy with a tensile strength of 80,000 psi‚ Needle bearing trunnions allow valve spring pressures of up to 350 lbs. open pressure, making Aluminum Roller Rocker Arms a good choice for many street applications.
Don’t cut up your new rocker arms to clear a wider diameter valve spring. Instead, use these .100″ offset shafts to shift your Chrysler 273-360 rocker arms inboard to pick up clearance on 1.550″ and larger valve springs.
Made from a high quality aluminum alloy with a tensile strength of 80,000 psi‚ Needle bearing trunnions allow valve spring pressures of up to 350 lbs. open pressure, making Aluminum Roller Rocker Arms a good choice for many street applications.
Don’t cut up your new rocker arms to clear a wider diameter valve spring. Instead, use these .100″ offset shafts to shift your Chrysler 273-360 rocker arms inboard to pick up clearance on 1.550″ and larger valve springs.
| Weight | 5.06 kg |
|---|---|
| Dimensions | 24.5 × 3 × 2.8 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 036584291497 |
| brand | COMP Cams |
| part_number | 1084-2 |
Edelbrock part #77770 Red Roller Rocker arms are designed for small block Chevy’s using 3/8″ studs. This 1.5:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are centerless ground for superior quality. A high quality Torrington needle bearing fulcrum combined with a roller tip ensure smooth operation and performance. The full body design will accommodate up to 1.65″ diameter springs. Thick-walled adjusting nuts and 4140 steel poly locks are included.
Edelbrock part #77770 Red Roller Rocker arms are designed for small block Chevy’s using 3/8″ studs. This 1.5:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum.
Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L)
Stock LS Rocker arms can experience cageless needle bearing failure when loads are increased. COMP Cams engineers have solved this problem with upgraded Rockers featuring a stronger and more durable trunnion and captured bearing design. These upgraded Rockers increase lift capacity and utilize caged precision Roller bearings to improve valve train durability. The trunnions are secured by snap rings. The Rockers feature a black-oxide finish and are available for LS1, LS3 and LS7 valve train geometries. A DIY upgrade kit is also available for users with stock Rockers. It features a magnetic Installation tool, and its cylindrical construction is perfect for use in an arbor press, bench vise or c-clamp.
With upgraded trunnions that are secured by snap rings along with a black oxide finish, our upgraded OE LS rockers offer higher lift capacity than stock. Featuring a 1.7 ratio, these 1477 rockers fit LS1, LS2 and LS6 engines.
Available individually under 1477-1.
This Shaft Mount Aluminum Roller Rocker Arm Kit from COMP Cams is designed for Chrysler V8 383-440 Applications and has Rockers with a 1.6 ratio. Mounted on an ultra-durable shaft, these Rocker arms are made from a high quality aluminum alloy with a tensile strength of 80,000 psi. Needle bearing trunnions allow valve spring pressures of up to 350 lbs. open pressure, making Aluminum Roller Rocker Arms a good choice for many street applications.
Constructed from an aluminum alloy, this 1.6 ratio shaft-mount rocker system for Chrysler 383-440 has a tensile strength of 80,000, perfect for any race applications.
Increase Strength Over Stock, While Increasing Lift without Swapping Cams. For LS3/L99/L76 and Other Rectangle-Port Head Equipped LS Applications. Includes Full Set of (16) Stud-Mount Rockers (with Poly Locks), 3/8″ Studs and Raised Guide Plates for 5/16″ Pushrods. The above image does not show a complete set of Rockers, poly-locks, Studs, or guide plates.
Convert your LS3 engine to an adjustable valvetrain with the Ultra Pro Magnum Rocker Kit. Our kit includes 1.8 Ultra Pro Magnum Rockers, guideplates, 3/8″ studs, adjusting nuts and set screws for a complete adjustable valvetrain solution.
Reviews
There are no reviews yet.