0
3
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
3 Shopping Cart 981.36 $

COMP Cams Alum Rocker Arm Chrysler SB 1.6in

This Shaft Mount Aluminum Roller Rocker Arm Kit from COMP Cams is designed for Chrysler V8 273-360 Applications and has Rockers with a 1.6 ratio. Mounted on an ultra-durable shaft, these Rocker arms are made from a high quality aluminum alloy with a tensile strength of 80,000 psi. Needle bearing trunnions allow valve spring pressures of up to 350 lbs. open pressure, making Aluminum Roller Rocker Arms a good choice for many street applications.
Constructed of a strong aluminum alloy, these 1.6 ratio shaft-mount rockers replace the rockers that comes with our 1074-KIT Shaft-Mount Rocker System for Chrysler 273-360.

1,458.84 $

Out of stock
SKU 1076-16
brand COMP Cams

Description

This Shaft Mount Aluminum Roller Rocker Arm Kit from COMP Cams is designed for Chrysler V8 273-360 Applications and has Rockers with a 1.6 ratio. Mounted on an ultra-durable shaft, these Rocker arms are made from a high quality aluminum alloy with a tensile strength of 80,000 psi. Needle bearing trunnions allow valve spring pressures of up to 350 lbs. open pressure, making Aluminum Roller Rocker Arms a good choice for many street applications.
Constructed of a strong aluminum alloy, these 1.6 ratio shaft-mount rockers replace the rockers that comes with our 1074-KIT Shaft-Mount Rocker System for Chrysler 273-360.

Specification

Weight 6.68 kg
Dimensions 13 × 4 × 3.8 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

false
units_per_sku

1
upc

036584290728
brand

COMP Cams
part_number

1076-16

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 13704-KIT

    Comp Cams GM LS7 & Gen V LT Trunnion Upgrade Kit

    No Reviews

    The COMP Cams GM LS7/Gen V LT Trunnion Upgrade Kit is designed to upgrade the stock needle bearings with full complement Roller trunnions and will improve the reliability of your LS7 and Gen V LT Rocker arms. A must when upgrading to a high performance Camshaft or higher load valve springs.
    Kit includes:

    Heavy-duty billet Steel Rocker arm trunnions
    High needle count Roller bearings
    Retaining rings

    Our trunnion upgrade kit converts an OE GM LS7 and GEN V LT rocker into a captured trunnion for higher stability and stiffness. Compatible with stock geometry, our trunnion kit can be performed in 30 minutes with a C-clamp or a bench vise.
    For GM LS Trunnion Upgrade Kit, see 13702-KIT. Includes virtually the same components as the LS kit, but includes a set of M8x1.25×35 SHCS bolts to fit the GEN V LT instead of the M8x1.25×45 SHCS bolts in the 13702/TL-KIT. Bearings, Retaining Clips and Trunnions are identical. See 13702TL-KIT for GM LS Trunnion Upgrade Kit with Tool.
    GM LS7 and GEN V LT1

    301.68 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 13702-KIT

    COMP Cams Trunnion Kit LS-Type Rocker Retrofit

    No Reviews

    Upgrades stock LS Series Rocker arms with captured Roller trunnions for modified applications. NASCAR spec LS engine proven to increases stability and stiffness.
    Our trunnion upgrade kit converts a stock LS series rocker arm into a captured trunnion for increased stability and stiffness. Compatible with stock geometry, our trunnion kit can be performed in 30 minutes with a C-clamp or a bench vise.
    See 13702TL-KIT for Trunnion Upgrade Kit with Assembly tool. See 13704-KIT for Trunnion Upgrade Kit for GM LS7 and GM GEN V LT.

    256.00 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 77780

    Edelbrock Rocker Arms Roller SBF 3/8In 1 6 1 Ratio Set of 16

    No Reviews

    Edelbrock part #77780 Red Roller Rocker arms are designed for small block Ford’s using 3/8 studs. This 1.6:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are centerless ground for superior quality. A high quality Torrington needle bearing fulcrum combined with a roller tip ensure smooth operation and performance. The full body design will accommodate up to 1.65″ diameter springs. Thick-walled adjusting nuts and 4140 steel poly locks are included.
    Edelbrock part #77780 Red Roller Rocker arms are designed for small block Ford’s using 3/8 studs. This 1.6:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum.
    Ford:Small-Block:289 (4.7L)-351W (5.8L)

    • Made In U.S.A.
    961.92 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 1621-16

    COMP Cams Ultra Pro Mag Rocker Kit Chrysler 3

    No Reviews

    Ultra Pro Magnum Roller Rocker Arms not only live up to the lofty standards of the original Pro Magnums. The 8650 chromemoly material and arched, web-like design deliver increased strength and rigidity while still reducing the moment of inertia and optimizing the dynamic balance. A unique black oxide exterior finish helps prevent corrosion and increases durability. Featuring Oversized trunnions, precision-sorted needle bearings and hardened Roller tips for the ultimate in performance and dependability. Optimized retainer and valve spring clearances allow for use of most diameter springs, retainers and +.050″ locks without clearance or fitment issues.Chrysler 383-440 Big Block – Shaft Mounted – 1.5 Ratio. Investment cast 8650 chromemoly body and arched, web-like design deliver increased strength and rigidity while still reducing the moment of inertia. Unique black oxide exterior finish helps prevent corrosion and increases durability. Optimized retainer and valve spring clearances allow for use of most diameter springs, retainers and +.050″ locks without clearance or fitment issues. Feature Oversized trunnions, precision-sorted needle bearings and hardened Roller tips. Lifetime Warranty – So strong that we guarantee the Rocker bodies against breakage for life. For use with up to 850 lbs of open spring pressure. Requires ball/ball style pushrods.
    Complete with bolts, shafts and spacers, this 1.5 Ultra Pro Magnum shaft-mount rocker system for Chrysler 383-440 B/RB is made from 8620 chromemoly, handles higher spring rates, a unique oil system and an adjuster that allows ball pushrods.

    1,313.50 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 3 Cart Garage
support@ucperformance.com