Mishimoto 2013+ Ford Focus ST Performance Aluminum Radiator

Improve the cooling capacity on your 2015-2020 BMW M3 or M4 with the Mishimoto Performance Heat Exchanger. Air-to-water intercooling is the means of more efficient heat transfer from the charged air, but it now requires an additional heat exchanger mounted to the front of the vehicle in order to dissipate the transferred heat. The S55 powering the F8X generation of the M?s packs quite a punch and while the BMW engineers laid a solid foundation for dissipating the heat from the intercooling system, but we saw some room to improve. We started by eliminating any bits of plastic from the design, and replacing the end tanks, and ports with durable aluminum. We kept the dual-pass flow through the core for maximum cooling properties, while expanding the core into the available space. Our new design features a 42mm thick core while extending the height by 150mm totaling in a 60-percent increase in core volume and adding 180-percent to the external fin surface area. The end result of our improvements is a 9 F drop in global intercooling system temperatures over the stock unit. Size isn?t the only thing that matters with this heat exchanger. Since the heat exchanger sits front and center in the M3 and M4?s cooling stack, It’s susceptible to damage from road debris. To keep your air-to-water system safe, our heat exchanger comes equipped with a steel mesh stone guard for an added layer of protection for the fins. We also incorporated a variable fin pitch for the lower 12 rows on the core in order to facilitate cooling to DCT equipped M?s. Finally, our 2015-2020 BMW F8X M3/M4 Performance Heat Exchanger also includes the Mishimoto Lifetime Warranty for a worry-free install.
High-performance component designed to enhance thermal efficiency, durability, and reliability under demanding conditions. Engineered to support optimal temperature control and system performance across applications.

• Includes durable stainless-steel stone guard for maximum protection against road debris
• 10F drop in global intercooler coolant temperatures over stock
• 60-percent increase in core volume

CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your E30 M3 running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF’s exclusive B-Tube Technology: Unlike a regular oval shape “O” type radiator tube, CSF uses a specially engineered tube in the shape of a “B”. These “B-tubes” are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal “O” shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes – producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With “B-tubes” you are able to get “dual liquid laminar flow”. CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.
CSF manufactures the most advanced and efficient radiator in the industry for your E30 M3. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
The CSF #7063 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

• “Drop-In Fit” Requiring No Modifications to Install – Accepts All Attaching OEM Components Including “Quick Connect” Hoses, AC Condenser, Mounting Brackets and Fan Shroud
• 1-1/4″ Core Features an Ultra-Efficient Fin with a Multi-Louvered Design for Maximum Surface Area Contact
• CNC Machined Brackets and Fittings for Superb Fit and Durability
• Slip-On 1-3/8″ Inlet/Outlet Connections
• Replaces OEM Part Number: 17111468084
• All-Aluminum Race Style Drain Plug
• 1-Hour “Mirror Finish” Hand Polish
• CSF’s Exclusive B-Tube Technology