0
1
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
1 Shopping Cart 3,688.89 $

CSF Nissan R33 Skyline GT-R/GTS Full Billet Aluminum High-Performance Radiator – Black

The 2-Row 42mm core greatly not only increases the fluid capacity of the radiator, but also improves the cores ability to dissipate heat. CSF’s Exclusive B-Tube Technology increases the heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance. More cooling rows also improve the overall efficiency of the radiator. More cooling tubes means more surface area for the coolant’s heat to dissipate from. Each end tank is CNC machined billet aluminum giving them incredible strength and durability. CNC machining offers incredible precision and uniformity. The results are perfectly produced end tanks that perfectly match up with the ends of the 42 mm core. Hand TIG welding joins the tanks to the core creating the strongest radiator on the market for the R33 Skyline. Each radiator includes a 1.4 bar high pressure cap with an embossed CSF logo. High pressure radiator caps raise the boiling point of coolant. This helps protect the system from boiling over at higher operating temperatures. While the radiator is designed to keep the system from reaching such temperatures, it is always good to have extra protection for situations where the coolant gets too hot. The CSF #7219B comes in Black. Also available in a raw billet aluminum finish (CSF #7219).
CSF manufactures the most advanced and efficient radiator in the industry for your R33 Skyline. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
The CSF #7219B Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

  • 6.5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact
  • True Plug-and-Play “Drop-in Fit” Installation Requires Absolutely No Modifications
  • Top Rank Logo machined into Top End Tank and Painted on Core
  • 1.4 Bar (20psi) High Pressure Radiator Cap with CSF logo
  • 75 Cooling Tubes with CSF’s Exclusive B-Tube Technology
  • CNC Machined Mounting Pins and OEM Style Inlet/Outlet
  • CNC Machined 100% Billet Aluminum End Tanks
  • 1/8th NPT Temp Sensor Port on Top End Tank
  • 100% All Aluminum TIG-Welded Construction
  • 2-Row – 42mm Ultra-High-Performance Core
  • OE Location Fan Shroud Mounting Points
  • Individually Leak and Pressure Tested
  • 2-Year Limited Warranty
  • Satin Black Finish
  • Limited Production

1,499.38 $

Out of stock
SKU 7219B
brand CSF

Description

The 2-Row 42mm core greatly not only increases the fluid capacity of the radiator, but also improves the cores ability to dissipate heat. CSF’s Exclusive B-Tube Technology increases the heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance. More cooling rows also improve the overall efficiency of the radiator. More cooling tubes means more surface area for the coolant’s heat to dissipate from. Each end tank is CNC machined billet aluminum giving them incredible strength and durability. CNC machining offers incredible precision and uniformity. The results are perfectly produced end tanks that perfectly match up with the ends of the 42 mm core. Hand TIG welding joins the tanks to the core creating the strongest radiator on the market for the R33 Skyline. Each radiator includes a 1.4 bar high pressure cap with an embossed CSF logo. High pressure radiator caps raise the boiling point of coolant. This helps protect the system from boiling over at higher operating temperatures. While the radiator is designed to keep the system from reaching such temperatures, it is always good to have extra protection for situations where the coolant gets too hot. The CSF #7219B comes in Black. Also available in a raw billet aluminum finish (CSF #7219).
CSF manufactures the most advanced and efficient radiator in the industry for your R33 Skyline. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
The CSF #7219B Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

  • 6.5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact
  • True Plug-and-Play “Drop-in Fit” Installation Requires Absolutely No Modifications
  • Top Rank Logo machined into Top End Tank and Painted on Core
  • 1.4 Bar (20psi) High Pressure Radiator Cap with CSF logo
  • 75 Cooling Tubes with CSF’s Exclusive B-Tube Technology
  • CNC Machined Mounting Pins and OEM Style Inlet/Outlet
  • CNC Machined 100% Billet Aluminum End Tanks
  • 1/8th NPT Temp Sensor Port on Top End Tank
  • 100% All Aluminum TIG-Welded Construction
  • 2-Row – 42mm Ultra-High-Performance Core
  • OE Location Fan Shroud Mounting Points
  • Individually Leak and Pressure Tested
  • 2-Year Limited Warranty
  • Satin Black Finish
  • Limited Production

Specification

Weight 17 kg
Dimensions 30 × 24 × 6 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

N
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
clearance_item

t
regular_stock

false
units_per_sku

1
upc

71035307219B
brand

CSF
part_number

7219B

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 8131

    CSF BMW B58/B48 Front Mount Triple-Pass Heat Exchanger w/Rock Guard

    No Reviews

    The original OEM B58 heat exchanger is a 1-row unit that is 27mm thick. In comparison, CSF has used its industry-exclusive world’s largest 2-row core (68mm) with CSF’s B-Tube technology. A unique tank design allows the larger CSF core to still fit into the OEM cooling system housing. Another critical feature of the CSF BMW B58 high-performance heat exchanger is its unique triple-pass flow design. The water traveling through the upgraded heat exchanger flows through the radiator three times before exiting the cooler and flowing back into the manifold charge cooler. This ensures that the outlet water temperature of the heat exchanger is the absolute lowest it can be. The OEM design, as well as more expensive aftermarket designs, all have single-pass flow structures.
    Significantly reduce Intake Air Temperatures (IAT) for Maximum Performance (with Faster Heat Soak Recovery) on your B58/B48 Powered BMW with a CSF Heat Exchangers.
    The CSF #8131 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

    • Direct Plug-and-Play Design, Including CNC Machined “Quick Connect” Inlet/Outlet Water Fittings
    • 68mm 2-Row Core with CSF’s B-Tube Technology (World’s Largest 2-Row Core)
    • OEM CNC Machined Mounting Location Pins and Brackets
    • Core Size: 524mm Length x 478mm Height x 69mm Wide
    • Replaces OEM Part Number: 17118741830
    • No Modifications Needed to Install
    • 1-Hour “Mirror Finish” Hand Polish
    • 6.5mm Multi-Louvered Fin Height
    • Included Detachable Rock Guard
    • Triple-Pass Flow Design
    888.68 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 7088

    CSF Porsche 944 (NA and Turbo) High Performance Radiator

    No Reviews

    CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your Porsche 944 / 968 / 924S running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF’s exclusive B-Tube Technology: Unlike a regular oval shape “O” type radiator tube, CSF uses a specially engineered tube in the shape of a “B”. These “B-tubes” are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal “O” shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes – producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With “B-tubes” you are able to get “dual liquid laminar flow”. CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.
    CSF manufactures the most advanced and efficient radiator in the industry for your Porsche 944 / 968 / 924S. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
    The CSF #7088 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

    • 6.5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact
    • True Plug-and-Play “Drop-in Fit” Installation Requires Absolutely No Modifications
    • CNC Machined Mounting Brackets, Fittings, and OEM Style Inlet/Outlet
    • Includes Adjustable Top End Plate Radiator Cross-Over Tube Brackets
    • Optional Shroud & Dual 9-Inch SPAL Fan Kit Available (CSF #8180)
    • 100% All Aluminum TIG-Welded Construction
    • 2-Row – 42mm Ultra-High-Performance Core
    • Includes Upgraded Yellow Zinc Hardware
    • Individually Leak and Pressure Tested
    • CSF’s Exclusive B-Tube Technology
    • Satin Black Finish for OEM+ Look
    • 2-Year Limited Warranty
    951.66 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 7078

    CSF 15-18 BMW M2 (F87) / 12-16 BMW M235i/M235ix Radiator

    No Reviews

    CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your N55 Powered BMW running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF’s exclusive B-Tube Technology: Unlike a regular oval shape “O” type radiator tube, CSF uses a specially engineered tube in the shape of a “B”. These “B-tubes” are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal “O” shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes – producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With “B-tubes” you are able to get “dual liquid laminar flow”. CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.
    CSF manufactures the most advanced and efficient radiator in the industry for your N55 Powered BMW. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
    The CSF #7078 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

    • “Drop-in Fit” Requiring No Modifications To Install – Accepts All Attaching OEM Components Including “Quick-Connect” Hoses, AC Condenser, Mounting Brackets and Fan Shroud
    • Core Features an Ultra-Efficient Fin with 6.5mm Fin Height and Multi-Louvered Design for Maximum Surface Area Contact
    • 2-Row 42mm Core (Dual Core) Featuring CSF’s Exclusive B-Tube Technology
    • CNC Machined “Quick-Connect” Inlet/Outlet and All Aux. Connections
    • CNC Machined Brackets and Fittings for Superb Fit and Durability
    • Replaces OEM Part Number: 17118672103
    • All-Aluminum Race Style Drain Plug
    • Smooth Satin Finish
    883.20 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 7064

    CSF 99-03 BMW M5 (E39) / 95-03 BMW 540i M/T Radiator (Fits Auto Trans w/Modified Drain Plug)

    No Reviews

    CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your E39 M5/540i running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF’s exclusive B-Tube Technology: Unlike a regular oval shape “O” type radiator tube, CSF uses a specially engineered tube in the shape of a “B”. These “B-tubes” are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal “O” shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes – producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With “B-tubes” you are able to get “dual liquid laminar flow”. CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.
    CSF manufactures the most advanced and efficient radiator in the industry for your E39 M5/540i. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
    The CSF #7064 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

    • “Drop-in Fit” Requiring No Modifications to Install – Accepts All Attaching OEM Components Including “Quick Connect” Hoses, AC Condenser, Mounting Brackets and Fan Shroud
    • Core Features an Ultra-Efficient Fin with 6.5mm Fin Height and Multi-Louvered Design for Maximum Surface Area Contact
    • 2-Row 42mm Core (Dual Core) Featuring CSF’s Exclusive B-Tube Technology
    • CNC Machined Brackets and Fittings for Superb Fit and Durability
    • CNC Machined “Quick-Connect” Inlet/Outlet Connections
    • All-Aluminum Race Style Drain Plug
    • Smooth Satin Finish
    861.29 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 1 Cart Garage
support@ucperformance.com