-
Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) 2010-2015 Gen 5 Chevy Camaro SS 6.2L LS3 engines. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) 2010-2015 Camaro SS 6.2L.
Stage 2 Boost Cooler(tm) 2010-2015 Chevy Camaro SS 6.2L Forced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 2.5 Gal Tank Upgrade, 2010-2015 6.2L Camaro SS Injection Plate Upgrade, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 15′ Stainless Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic Nozzles/High Flow Solenoid/High Flow Check Valve -
Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) 2010-2015 Gen 5 Chevy Camaro SS 6.2L LS3 engines. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) 2010-2015 Camaro SS 6.2L.
Stage 2 Boost Cooler(tm) 2010-2015 Chevy Camaro SS 6.2L Forced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings) – No Tank -
Snow Performance 102mm LS Throttle Body Injection Plate
-
Snow Performance 10AN Braided Stainless Fuel Line Kit – Black Line
-
Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for 2010+ Ford F-150s equipped with the 3.5L EcoBoost engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2010+ Ford F-150s equipped with the 3.5L EcoBoost engine.
Stage 2 Boost Cooler(tm) 2010-2017 Ford F-150 3.5L EcoBoost Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings) – No Tank -
Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for 2010+ Ford F-150s equipped with the 3.5L EcoBoost engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2010+ Ford F-150s equipped with the 3.5L EcoBoost engine.
Stage 2 Boost Cooler(tm) 2010-2017 Ford F-150 3.5L EcoBoost Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 2.5 Gal Tank Upgrade, Throttle Body Spacer Injection Plate Upgrade, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 15′ Stainless Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic Nozzles/High Flow Solenoid/High Flow Check Valve -
Snow Performance 11-17 Mustang Stg 2 Boost Cooler F/I Water Inj. Kit (SS Brded Line/4AN Fittings) w/
Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for forced induction (supercharged/turbocharged) 2011+?Ford 5.0 Coyote engines. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) 2011+ Ford Mustang GTs equipped with the 5.0L Coyote engine.
Stage 2 Boost Cooler(tm) 2011-2017 Ford Mustang GT 5.0L Forced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings) – No Tank -
Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for forced induction (supercharged/turbocharged) 2011+?Ford 5.0 Coyote engines. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) 2011+ Ford Mustang GTs equipped with the 5.0L Coyote engine.
Stage 2 Boost Cooler(tm) 2011-2017 Ford Mustang GT 5.0L Forced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 2.5 Gal Tank Upgrade, 2011+ 5.0L Ford Mustang GT Throttle Body Spacer Injection Plate Upgrade, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 15′ Stainless Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic Nozzles/High Flow Solenoid/High Flow Check Valve -
Snow Performance 13-18 Ford Focus ST Stg 2 Boost Cooler Water Inj Kit (SS Braided Line/4AN) w/o Tank
Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for 2015+ Ford Mustangs equipped with the 2.3L EcoBoost engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2015+ Ford Mustang equipped with the 2.3L EcoBoost engine.
Stage 2 Boost Cooler 2013-2018 Ford Focus ST Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings) – No Tank -
To meet your specific vehicle’s fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.
Corvette C7 (2014-2019) Fuel Hat High Output Version (3 Pump, 1-274 and 2-285) -
Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for 2015+ Ford Mustangs equipped with the 2.3L EcoBoost engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2015+ Ford Mustang equipped with the 2.3L EcoBoost engine.
Stage 2 Boost Cooler(tm) 2015+ Ford Mustang 2.3L EcoBoost Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 2.5 Gal Tank Upgrade, Throttle Body Spacer Injection Plate Upgrade, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 15′ Stainless Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic Nozzles/High Flow Solenoid/High Flow Check Valve -
Snow Performance 15-17 Mustang EcB Stg 2 Bst Cooler Water Injection Kit (SS Brded Line/4AN) w/o Tank
Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for 2015+ Ford Mustangs equipped with the 2.3L EcoBoost engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2015+ Ford Mustang equipped with the 2.3L EcoBoost engine.
Stage 2 Boost Cooler(tm) 2015+ Ford Mustang 2.3L EcoBoost Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings) – No Tank
Showing 66265–66276 of 83360 results