-
Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Diesel! The Snow Performance Diesel Stage 2 Boost Cooler is available for all diesel truck owners looking to have the benefit of water-methanol injection through out the trucks boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven diesel trucks that see light towing.
Diesel Stage 2 Boost Cooler(tm) Water-Methanol Injection Universal (Red High Temp Nylon Tubing, Quick-Connect Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive VC-50 Controller/Harness, 20′ Red High Temp Nylon Tubing, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Dual Nozzle Upgrade, High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve- Adjustable Progressive Boost Activated Water-Meth Engagement
- 300 PSI UHO Pump/SP Hypersonic Nozzles
- High Flow Solenoid Upgrade
- 100% Methanol Resistant
- Dual Water-Meth Nozzles
- High Flow Check Valve
- Large 7 Gal Capacity
- Made In U.S.A.
-
The all new VC-50 water methanol injection controller from Snow Performance gives you the benefits of a boost gauge and water methanol controller/fail safe all in one! Heavily loaded, the VC-50 controller comes with built in manifold absolute pressure sensor that proportionality injects more or less water methanol according to boost pressure. Start and full points are adjustable to match what the engine requires. New dual tone 7 color (white, green, blue, red, orange, purple, yellow) OLED screen shows boost, percentage of injection, low level, second stage activation, and fault codes in a bright easy to read screen.
-
Snow Performance Stage 2.5 Forced Induction Progressive Water-Methanol Injection Kit
-
Water Methanol, Gas Stg II, Naturally Aspirated, Carbureted
-
Snow Performance Water-Methanol Injection systems provide increased performance with or without nitrous. Water Methanol Injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing which results in increased power and torque. When used with Nitrous, the need for timing retard is greatly reduced or eliminated. Boosted applications especially benefit from reduced intake temperatures. NX Water / Methanol systems include the latest technology and the highest quality components available. This innovative plate combines the performance and safety benefits of Water Methanol injection with the horsepower and throttle response improvements of a carburetor shear plate. This design places the water methanol nozzle in the center of the Carb bores for excellent cylinder to cylinder distribution. The system includes a high output water methanol pump, a 3 quart tank, filtered nozzles, push lock line as well as everything needed for the installation. Fits on Dominator or 4500 series intake flanges. Stage 2 systems are activated by a two dial electronic controller that progressively controls water methanol output by either boost or vacuum.
-
Snow Performance Water-Methanol Injection systems provide increased performance with or without nitrous. Water Methanol Injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing which results in increased power and torque. When used with Nitrous, the need for timing retard is greatly reduced or eliminated. Boosted applications especially benefit from reduced intake temperatures. NX Water / Methanol systems include the latest technology and the highest quality components available. This innovative plate combines the performance and safety benefits of Water Methanol injection with the horsepower and throttle response improvements of a carburetor shear plate. This design places the water methanol nozzle in the center of the Carb bores for excellent cylinder to cylinder distribution. The system includes a high output water methanol pump, a 3 quart tank, filtered nozzles, push lock line as well as everything needed for the installation. Fits on Dominator or 4500 series intake flanges. Stage 2 systems are activated by a two dial electronic controller that progressively controls water methanol output by either boost or vacuum.
Hellcat Lid With Stage 2.5 Water/Methanol System No Tank -
Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Dodge 6.7L Cummins owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Dodge 6.7L Cummins that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Dodge 6.7L Cummins (Red High Temp Nylon Tubing, Quick-Connect Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Stage 3 Controller/Harness, 20′ Red High Temp Nylon Tubing, EGT Probe Assembly, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve -
Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Dodge 5.9L Cummins owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! 7 Gal Tank included for trip ready installation. Recommended for all daily driven Dodge 5.9L Cummins that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system.
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Dodge 5.9L Cummins (Red High Temp Nylon Tubing, Quick-Connect Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Stage 3 Controller/Harness, 20′ Red High Temp Nylon Tubing, EGT Probe Assembly, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve -
Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Dodge 5.9L Cummins owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! 7 Gal Tank included for trip ready installation. Recommended for all daily driven Dodge 5.9L Cummins that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system.
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Dodge 5.9L Cummins (Red High Temp Nylon Tubing, Quick-Connect Fittings) – No Tank -
Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Chevy / GMC LBZ / LLY/ LMM/ LML / L5P Duramax Ford owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Chevy /GMC LBZ / LLY / LMM / LML / L5P Duramax owners that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Chevy/GMC LBZ/LLY/LMM/LML/L5P Duramax (Red High Temp Nylon Tubing, Quick-Connect Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Stage 3 Controller/Harness, 20′ Red High Temp Nylon Tubing, EGT Probe Assembly, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve -
Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstroke owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstrokes that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Ford 7.3/6.0/6.4/6.7 Powerstroke (Red High Temp Nylon Tubing, Quick-Connect Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Stage 3 Controller/Harness, 20′ Red High Temp Nylon Tubing, EGT Probe Assembly, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve -
Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all turbo diesel pusher RV owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the RV enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Comes with 40′ harness for easy install on rear motor applications and 7 Gal Tank for trip ready installation. Recommended for all diesel RV pushers seeking a plug and play water-methanol solution.
Showing 65185–65196 of 81244 results