-
Fully synthetic leading edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears. The use of modern additive technology provides ultimate protection, longer fluid life and stability combined with ideal shift quality under all operating conditions.
For modern automatic transmissions, hybrid transaxle systems and electric drive differentials where a ATF fluid according to the existing product specifications is required. Observe vehicle or transmission manufacturers instructions!
The specifications and regulations of the unit or vehicle manufacturers must be observed. Optimum effectiveness is only possible when the product is used unmixed.- Enables A Multifaceted Range Of Applications
- Excellent Viscosity/Temperature Properties
- Outstanding Friction Characteristics
- Very Good Low-Temperature Properties
- Outstanding Resistance To Oxidation
- Excellent Corrosion Protection
- High Resistance To Aging
- Prevents Foam Formation
- High Wear Resistance
-
Mineral based all-season motor oil, particularly suited for older generation high mileage gasoline and diesel vehicles. Provides a stable lubricating film even under extreme operating conditions. Designed with proven wear protection technology. Keeps rubber seals such as valve stem seals, crank seals, cam seals etc. soft and pliable for low oil consumption.
Ideal for the year-round use in older gas and diesel engine designs with or without turbocharger. Safe for catalytic converters.
Observe manufacturers instructions.- Can Be Used In Gasoline And Diesel Engines With And Without Turbocharger
- Tested For The Use With Catalytic Converters
- Very Good Dispersion Properties
- High Lubrication Reliability
- Optimum Stability To Aging
- Excellent Wear Resistance
- Excellent Cleaning Effect
- Prevents Black Sludge
- High Shear Stability
- Low Evaporation Loss
-
High performance Multipurpose Grease for use in a wide range of applications in motor vehicles and general machine lubrication. Carefully selected ingredients offer good corrosion protection, ensures long-term lubrication in damp and dusty environments. Resists cold and hot water washout. Certification: acc DIN 51502 K2K-20
In automotive sector, construction and agricultural machinery and in the industrial sector suitable as a universal lubrication grease. Comply with manufacturers instructions.
As usual for grease. The operating instructions of the bearing and machine manufacturers must be followed.- Especially Resistant To Cold And Hot Water
- Excellent Stability To Liquefying
- Highest Load-Carrying Capacity
- Outstanding Slip Properties
- Optimum Stability To Aging
- Friction And Wear Reducing
- Good Corrosion Protection
-
The MagnaFlow Performance Exhaust Diesel Turbo Downpipe 15398 is a 3in. diameter mandrel bent stainless steel pipe designed to connect near your turbocharger and is weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Magnaflow Direct-Fit Exhaust Pipe
The MagnaFlow Turbo Downpipe 15398 is a 3in. diameter mandrel bent stainless steel pipe designed to connect near your turbocharger and i’s weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Mandrel Bent Tubing
-
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4481597. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2001-2005 Mazda Miata. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Direct-Fit Catalytic Converter
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
- Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
- Durable 308 Stainless Steel MIG Welds
-
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4561062. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2005 Volkswagen Passat, 2001-2005 Audi A4 Quattro, and more, this direct-fit catalytic converter also interchanges with OE parts 8E0 131 089 DX and 4B0 254 200 X, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Direct-Fit Catalytic Converter
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.- Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
- Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
- Durable 308 Stainless Steel MIG Welds
-
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23941. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2002-2006 Acura RSX and interchanges with OE parts 18160-PRB-A00 and 18160-PRB-A20. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Mandrel Bent Tubing Retains Oem-Like Design And Geometry
- Durable 308 Stainless Steel Mig Welds
-
The MagnaFlow 2002-2008 Lexus SC430 Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.3L 2002-2008 Lexus SC430 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5 x 5.5in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Lexus SC430 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Lexus SC430’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16917 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16917 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Magnaflow Street Series Stainless Cat-Back System
The MagnaFlow 2002-2008 Lexus SC430 Street Series Cat-Back Performance Exhaust System 16917 brings out the personality of your 4.3L 2002-2008 Lexus SC430 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5 x 5.5in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Lexus SC430 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Lexus SC430’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16917 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16917 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno Proven Performance
-
The MagnaFlow Pro Series Cat-Back Performance Exhaust System17876 enhances your truck with an exhaust that has been weight-optimized and tuned to produce our famous deep signature sound and dyno-proven performance. 17876’s mandrel bent 5in. diameter main piping passes through a 1 Straight-Through mufflers before terminating in a Single Passenger Side Rear exit. Exhaust kit 17876 is engineered to produce Aggressive exterior and Moderate interior sound levels. Installation is made easy thanks to this exhaust system’s direct-fit, do-it-yourself design. This cat-back emissions-legal exhaust system is made of durable, corrosion resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty.
The MagnaFlow Pro Series Cat-Back Performance Exhaust System 17876 enhances your truck with an exhaust that has been weight-optimized and tuned to produce our famous deep signature sound and dyno-proven performance. 17876’s mandrel bent 5in. diameter main piping passes through a 1 Straight-Through mufflers before terminating in a Single Passenger Side Rear exit. Exhaust kit 17876 is engineered to produce Aggressive exterior and Moderate interior sound levels. Installation is made easy thanks to this exhaust system’s direct-fit, do-it-yourself design. This cat-back emissions-legal exhaust system is made of durable, corrosion resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty.- Throaty, powerful performance sound Magnaflow is famous for
- Throaty/Powerful Performance Sound Magnaflow Is Famous For
- Attention Grabbing Design Thanks To An Aggressive Style
- Intercooled Tips
-
The MagnaFlow® Toyota 4Runner Overland Series™ Cat-Back Performance Exhaust System #19546 will enhance your 4.0L V6 Toyota 4Runner (2003-2024) with MagnaFlow®’s renowned deep rumble and dyno-proven performance. MagnaFlow® #19546 is weight optimized for additional utility and designed such that its mandrel bent 2.5” diameter main piping is situated more closely to the body than the stock configuration. This combined with a single high-clearance no-tip, passenger-side rear exhaust exit allows for significantly improved ground clearance and departure angles. MagnaFlow® exhaust system #19546 is compatible with the most popular bolt-on aftermarket modifications and features our No Drone Technology, which cancels out the natural droning frequencies of the V6 Toyota 4Runner at cruising speeds. This allows for a quiet ride on the highway while retaining the character of your rig’s exhaust note. CNC precision robotic manufacturing enables perfect fitment and hassle-free bolt-on installation. The 100% stainless steel construction of exhaust kit #19546 is covered by MagnaFlow®’s limited lifetime construction warranty.
Magnaflow Overland Series Stainless Cat-Back System
The MagnaFlow Toyota 4Runner Overland Series Cat-Back Performance Exhaust System #19546 will enhance your 4.0L V6 Toyota 4Runner (2003-2023) with MagnaFlow’s renowned deep rumble and dyno-proven performance. MagnaFlow #19546 is weight optimized for additional utility and designed such that its mandrel bent 2.5″ diameter main piping is situated more closely to the body than the stock configuration. This combined with a single high-clearance no-tip, passenger-side rear exhaust exit allows for significantly improved ground clearance and departure angles. MagnaFlow exhaust system #19546 is compatible with the most popular bolt-on aftermarket modifications and features our No Drone Technology, which cancels out the natural droning frequencies of the V6 Toyota 4Runner at cruising speeds. This allows for a quiet ride on the highway while retaining the character of your rig’s exhaust note. CNC precision robotic manufacturing enables perfect fitment and hassle-free bolt-on installation. The 100% stainless steel construction of exhaust kit #19546 is covered by MagnaFlow’s limited lifetime construction warranty.- No-Drone-Technology Allows For A Quiet Cabin
- Dyno Proven Performance
- High Clearance Exit
-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0854 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0854’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2004-2008 Kia Spectra 2.0L & 2007 Kia Spectra5 2.0L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0854 includes (4) Bolts, (2) 2-Bolt Gaskets, (1) 2in. U-Bolt Clamp, (4) Nuts and interchanges with OE parts 0K2K140305, 286502F250, 287002F805, 287513S000. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0854 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23-169. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2004-2009 Toyota Prius and interchanges with OE part 17410-21500. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23-169. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2004-2009 Toyota Prius and interchanges with OE part 17410-21500. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Mandrel Bent Tubing Retains Oem-Like Design And Geometry
- Durable 308 stainless steel MIG welds
Showing 31033–31044 of 44069 results