-
Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Dodge 6.7 Cummins! The Snow Performance Diesel Stage 2 Boost Cooler is available for all 6.7 Cummins owners looking to have the benefit of water-methanol injection through out the 6.7Ls boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven 6.7L Dodge Cummins that see light towing.
Diesel Stage 2 Boost Cooler(tm) Water-Methanol Injection Kit Dodge 6.7L Cummins (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive VC-50 Controller/Harness, (2) 1′, (1) 2′, (1) 20′ Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Dual Nozzle Upgrade, High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve- Adjustable Progressive Boost Activated Water-Meth Engagement
- 300 PSI UHO Pump/SP Hypersonic Nozzles
- High Flow Solenoid Upgrade
- 100% Methanol Resistant
- Dual Water-Meth Nozzles
- High Flow Check Valve
- Large 7 Gal Capacity
- Made In U.S.A.
-
Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Dodge 6.7L Cummins owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Dodge 6.7L Cummins that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Dodge 6.7L Cummins (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive Stage 3 Controller/Harness, (3) 1′, (1) 2′, (1) 20′ Stainless Steel Braided Line, EGT Probe Assembly, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve -
Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) Dodge Challengers/Chargers with the 5.7 / 6.1 / 6.4 engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) Dodge Challenger/Chargers with 5.7 / 6.1 / 6.4 engine.
Stage 2 Boost Cooler(tm) 2008+ Dodge Challenger/Charger RT 5.7 / 6.1 / 6.4 Forced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 2.5 Gal Tank Upgrade, Throttle Body Spacer Injection Plate Upgrade, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 15′ Stainless Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic Nozzles/High Flow Solenoid/High Flow Check Valve -
Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for your 2008+ Mitsubishi Evo X equipped with the 2.0L engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2008-2015 Mitsubishi Evo X 2.0L.
Stage 2 Boost Cooler(tm) 2008-2015 Mitsubishi EVO X 2.0L Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 2.5 Gal Tank Upgrade, Mitsubishi Evo X Throttle Body Spacer Injection Plate Upgrade, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 15′ Stainless Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic Nozzles/High Flow Solenoid/High Flow Check Valve -
Snow Performance 10 Gallon Tank upgrade is designed for all diesel truck owners looking to carry a large amount of water-methanol fluid with out hindering bed space. Custom molded to fit in the void area between the truck bed floor, top of bed and tire well. Comes complete with a high flow Solenoid, screen fitting, custom straps, and 20′ of tubing. Designed to go 800+ miles while towing.
10 Gal. Water-Methanol Tank Upgrade High Temp Nylon (w/brackets, solenoid, hose & all necessary fittings)
Kit Contents: 10 Gal Tank, (2) Straps, (20′) Red High Temp Nylon Tubing, High Flow Solenoid Upgrade, Required Quick-Connect Fittings/Hardware, Screen Filter -
Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) 2010-2015 Gen 5 Chevy Camaro SS 6.2L LS3 engines. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) 2010-2015 Camaro SS 6.2L.
Stage 2 Boost Cooler(tm) 2010-2015 Chevy Camaro SS 6.2L Forced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 2.5 Gal Tank Upgrade, 2010-2015 6.2L Camaro SS Injection Plate Upgrade, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 15′ Stainless Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic Nozzles/High Flow Solenoid/High Flow Check Valve -
Snow Performance 102mm LS Throttle Body Injection Plate
-
Snow Performance 10AN Braided Stainless Fuel Line Kit – Black Line
-
Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for 2010+ Ford F-150s equipped with the 3.5L EcoBoost engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2010+ Ford F-150s equipped with the 3.5L EcoBoost engine.
Stage 2 Boost Cooler(tm) 2010-2017 Ford F-150 3.5L EcoBoost Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 2.5 Gal Tank Upgrade, Throttle Body Spacer Injection Plate Upgrade, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 15′ Stainless Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic Nozzles/High Flow Solenoid/High Flow Check Valve -
Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for forced induction (supercharged/turbocharged) 2011+?Ford 5.0 Coyote engines. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) 2011+ Ford Mustang GTs equipped with the 5.0L Coyote engine.
Stage 2 Boost Cooler(tm) 2011-2017 Ford Mustang GT 5.0L Forced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 2.5 Gal Tank Upgrade, 2011+ 5.0L Ford Mustang GT Throttle Body Spacer Injection Plate Upgrade, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 15′ Stainless Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic Nozzles/High Flow Solenoid/High Flow Check Valve -
To meet your specific vehicle’s fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example). These pumps are NOT compatible with methanol. For street-driven applications, it can be beneficial to combine a smaller fuel pump along with one or two larger fuel pumps. This allows you to street drive on the smaller fuel pump which has a lower amp draw and does not generate as much heat. Once you get into boost, the larger pumps can be activated to support your high horsepower needs. The easiest way to do this is to use a Snow Performance Boost activated pressure switch (part # SNO-81014) and a Snow Performance Multi-Pump Relay Module (part # SNF-20003). Available pump configurations are shown below: 2 Pump Street able Configuration (one 450lph pump and one 470lph pump). This configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline. -Current Selection 3 Pump Street able Configuration (One 450lph pump and Two 470lph pumps)- This configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline. This configuration draws 10-12% less current than the ?Race 3 pump version. 3 Pump Race Configuration (Three 470lph pumps). This configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline. This configuration is designed for max effort/flow.
Corvette C7 (2014-2019) Fuel Hat High Output Version (3 Pump, 1-274 and 2-285) -
Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for 2015+ Ford Mustangs equipped with the 2.3L EcoBoost engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2015+ Ford Mustang equipped with the 2.3L EcoBoost engine.
Stage 2 Boost Cooler(tm) 2015+ Ford Mustang 2.3L EcoBoost Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 2.5 Gal Tank Upgrade, Throttle Body Spacer Injection Plate Upgrade, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 15′ Stainless Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic Nozzles/High Flow Solenoid/High Flow Check Valve
Showing 44065–44076 of 55109 results