-
Kooks Headers and Exhaust has been the leader in the High Performance Exhaust Industry for over 50 Years! Since 1962, Kooks takes pride in offering the best Headers and complete exhaust systems for your street, race and off-road applications. We have won hundreds of championships and set countless records in the NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, SCCA and many other racing organizations. Now with three generations of family leadership, we are proud to say that all of our products are handcrafted here in the USA and we are proud to still be independently owned and operated. And don’t forget, “Get Kookin with KOOKS!”
3in. Ball and Socket Connection Kit. 2) 6in. Long Pieces of 3in. 304 Stainless Tubing with Flare. 2) 6in. Long Pieces of 3in. 304 Stainless Tubing with Ball. 4) 3in. 2-Bolt Stainless Flanges. 1) Ball and Socket Connection Bolt Kit. Sold as
3in. Ball and Socket Connection Kit. This Kit Allows You to Add a Connection in a 3in. Exhaust System. 2) 6in. Long Piece of 3in. O.D. 16ga 304 Stainless Steel Tubing with a Flare on One End. 2) 6in. Long Piece of 3in. O.D. 16ga 304 Stainless Steel Tubing with a Ball on One End. 4) 3in. 2-Bolt Flanges laser cut from 3/8in. Thick 304 Stainless Steel. 1) Ball and Socket Connection Bolt Kit. Sold as Kit.
3″ Ball and Socket Connection Kit. This Kit Allows You to Add a Connection in a 3″ Exhaust System. 2) 6″ Long Piece of 3″ O.D. 16ga 304 Stainless Steel Tubing with a Flare on One End 2) 6″ Long Piece of 3″ O.D. 16ga 304 Stainless Steel Tubing with a Ball on One End 4) 3″ 2-Bolt Flanges laser cut from 3/8″ Thick 304 Stainless Steel 1) Ball and Socket Connection Bolt Kit Sold as Kit.- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks System Are Specifically Designed For Maximum Power
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Limited Lifetime Warranty To Original Purchaser
- 3 Generations Being Family Owned And Operated
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 100 Percent Manufactured In The USA
-
Kooks Headers and Exhaust has been the leader in the High Performance Exhaust Industry for over 50 Years! Since 1962, Kooks takes pride in offering the best Headers and complete exhaust systems for your street, race and off-road applications. We have won hundreds of championships and set countless records in the NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, SCCA and many other racing organizations. Now with three generations of family leadership, we are proud to say that all of our products are handcrafted here in the USA and we are proud to still be independently owned and operated. And don’t forget, “Get Kookin with KOOKS!”
3in. Oval Muffler. Polished Stainless Steel. Center Inlet/Center Outlet. 12in. Long Body. 16in. Overall length. 4-1/2in. x 7-1/2in. Oval Body. 3in. I.D. Inlet and Outlet. Sold Individually.
3″ Oval Muffler. Polished Stainless Steel. Center Inlet/Center Outlet. 12″ Long Body. 16″ Overall length. 4-1/2″ x 7-1/2″ Oval Body. 3″ I.D. Inlet and Outlet. Sold Individually.
3″ Oval Muffler Polished Stainless Steel Center Inlet/Center Outlet 12″ Long Body 16″ Overall length 4-1/2″ x 7-1/2″ Oval Body 3″ I.D. Inlet and Outlet Sold Individually- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks System Are Specifically Designed For Maximum Power
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Limited Lifetime Warranty To Original Purchaser
- 3 Generations Being Family Owned And Operated
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 100 Percent Manufactured In The USA
-
Kooks Headers and Exhaust has been the leader in the High Performance Exhaust Industry for over 50 Years! Since 1962, Kooks takes pride in offering the best Headers and complete exhaust systems for your street, race and off-road applications. We have won hundreds of championships and set countless records in the NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, SCCA and many other racing organizations. Now with three generations of family leadership, we are proud to say that all of our products are handcrafted here in the USA and we are proud to still be independently owned and operated. And don’t forget, “Get Kookin with KOOKS!”
O2 Extension Kit C6 Corvette 2) 16in. Front Extension Harness (4-Pin) 2) 18in. Rear Extension Harness (4-Pin). Extensions are included in Header kits where needed. This part is a replacment for damaged or lost Extensions.
O2 Extension Kit C6 Corvette 2) 16in. Front Extension Harness (4-Pin) 2) 18in. Rear Extension Harness (4-Pin). Oxygen Sensor Extension harnesses are included in Header kits where needed. This part number should only be ordered as a replacment for damaged or lost Oxygen Sensor Extensions.- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks System Are Specifically Designed For Maximum Power
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Limited Lifetime Warranty To Original Purchaser
- 3 Generations Being Family Owned And Operated
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 100 Percent Manufactured In The USA
-
Kooks Headers and Exhaust has been the leader in the High Performance Exhaust Industry for over 50 Years! Since 1962, Kooks takes pride in offering the best Headers and complete exhaust systems for your street, race and off-road applications. We have won hundreds of championships and set countless records in the NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, SCCA and many other racing organizations. Now with three generations of family leadership, we are proud to say that all of our products are handcrafted here in the USA and we are proud to still be independently owned and operated. And don’t forget, “Get Kookin with KOOKS!”
Spark Plug Sleeve-Natural W/Red Logo Package of 8 Sleeves. Universal-fits multiple angled spark plug boots. 1-1/4” I.D. at both ends. Withstands up to 1200°F of direct heat. Glass fiber double-wall construction. Fits nearly every boot type!
Universal Spark Plug Sleeve – Natural W/Red Logo Package of 8 Sleeves
Universal Spark Plug Sleeve Natural W/Red Logo Package of 8 Sleeves Universal-Fits nearly every type of boot 1-1/4” I.D. at both ends Withstands up to 1200°F of direct heat Glass fiber double-wall construction- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks System Are Specifically Designed For Maximum Power
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Limited Lifetime Warranty To Original Purchaser
- 3 Generations Being Family Owned And Operated
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 100 Percent Manufactured In The USA
-
Kraftwerks Performance Group is proud to bring you the most advanced supercharger system available. At the core of each Kraftwerks supercharger kit is the revolutionary and patented Rotrex, traction-drive supercharger. The proprietary design allows for reduced weight; smaller, quieter, cooler operation; and shaft speeds in excess of 200,000 rpm. No other forced induction method can compare to Rotrex’s superior efficiency, unmatched performance, reduced emissions, and transient response. Kraftwerks supercharger systems are designed to deliver broad, usable power gains—ideal for street cars and track cars alike. No other supercharger kit or turbocharger system can compare. Kraftwerks supercharger kits represent the pinnacle of forced induction, having demonstrated gains in excess of 100% across the entire powerband on a number of applications. Each Kraftwerks supercharger kit is designed in-house at our state-of-the-art, Norco, Calif., facility with applications available for a variety of vehicles. Today we continue our tradition of creating leading-edge products through a state-of-the-art engineering and R&D department as well as through extensive engine development and testing both on the race track and the street.
Supercharger Pulley Upgrade; 90mm X 30mm;- Pulley Upgrade
-
KraftWerks 19-24 Honda Talon Stage I Camshaft Set
-
Intercooler; 3 in. Inlet/Outlet; Core Size: 31 in. L x 12 in. H x 4 in. T; Black;
-
Intercooler; 3 in. Inlet/Outlet; Core Size: 31 in. L x 12 in. H x 4 in. T;
-
20mm Replacement Belt; 1440mm/20mm Width Cogged Belt;
-
Flanged Cogged Pulley; 30mm;
-
The Turn Signal Adapter Kit accepts any single-circuit (2-wire power/ground) Kuryakyn by Kellermann or aftermarket turn signals that mount via M8 studs.
- Provides full-coverage over the OEM mounting location for an extremely clean look
- Made from high-quality CNC-machined aluminum with black anodized finish
- Accepts any aftermarket turn signals that mount via M8 stud
- Includes specific wiring pigtails with built-in resistors
Showing 27973–27984 of 40982 results