-
The unique design of CSF’s oil cooler line has distinct advantages over conventional style oil coolers (plate-type/stacked oil coolers). The oil coolers can be placed in tighter spaces or different areas of the vehicle that don’t have much vertical surface area. Longer rectangular sizes can also help with avoiding the stacking of too many coolers which may cause airflow issues to other components in the cooling system. Inlet/outlet port placement is much easier to route oil lines. Typical oil cooler lines have to be routed from different/opposite ends of the cooler often facing up or down. Usually one line has to run across from one side of the cooler to the other to then be routed together to the feed/return connection of the oil system. The CSF oil coolers are much more robust, durable, and can withstand a higher peak burst rate. This allows the cooler to be mounted in areas that might get high debris (front fascia, diff cooler, side vents, etc…). The CSF oil cooler is designed to withstand a tremendous amount of vibration and debris.
CSF offers the best and most advanced Oil Coolers on the market. So when it comes to keeping your engine oil temps down as you push your Universal / 73′ Porsche 911 RS-Style Bumper hard on the street or track, a CSF is the obvious choice.
The CSF #8201 is a universal cooling product and will require some custom work and/or fabrication to install. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Satin Black Finish for Extreme Protection Against Corrosion and Debris
- “Aero-Flow” Bar Design for Lightweight, Strength, and Maximum Flow
- High Efficiency & Rugged Durability Bar/Plate Design
- Direct-Fit for Porsche ’73 RS Style Front Bumper
- Triangular Flush Mounting Holes (M8 x 1.25)
- Optimized to Also Accept AN-16 Connections
- Core Surface: 18.9″ L x 4.72″ H x 2.25″ W
- Overall: 22″ L x 4.75″ H x 2.25″ W
- M22 x 1.5 Inlet/Outlet Connections
- Internal Radius for Maximum Flow
- Fluid Capacity 0.72L (0.76 qt)
- Pressure Tested at 120psi
- Dual-Pass Oil Cooler
-
CSF has created the Ultimate Half radiator with direct fitment for the most popular 92-00 Honda Civic platform. Even better, it can be used as a universal radiator and comes with a direct-fitment kit for Mitsubishi Evolution 7/8/9 models as well. A true innovation of the industry’s #1 selling model. Take your set up to the next level with this Half sized radiator. This radiator features a 2-Row core with CSF’s exclusive B-Tube Technology: Unlike a regular oval shape “O” type radiator tube, CSF uses a specially engineered tube in the shape of a “B”. These “B-tubes” are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal “O” shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes – producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With “B-tubes” you are able to get “dual liquid laminar flow”. CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.
CSF manufactures the most advanced and efficient radiator in the industry for your Evo/Civic/Custom Application. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
The CSF #2858X is a universal cooling product and will require some custom work and/or fabrication to install. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- “Drop-in Fit” Requiring No Modifications to Install – Accepts All Attaching OEM Components Including “Quick Connect” Hoses, AC Condenser, Mounting Brackets and Fan Shroud
- Core Features an Ultra-Efficient Fin with 6.5mm Fin Height and Multi-Louvered Design for Maximum Surface Area Contact
- 2-Row 42mm Core (Dual Core) Featuring CSF’s Exclusive B-Tube Technology
- CNC Machined Brackets and Fittings for Superb Fit and Durability
- CNC Machined “Quick-Connect” Inlet/Outlet Connections
- All-Aluminum Race Style Drain Plug
- 1-Hour “Mirror Finish” Hand Polish
-
CSF has created the Ultimate Half radiator with direct fitment for the most popular 92-00 Honda Civic platform. Even better, it can be used as a universal radiator and comes with a direct-fitment kit for Mitsubishi Evolution 7/8/9 models as well. A true innovation of the industry’s #1 selling model. Take your set up to the next level with this Half sized radiator. This radiator features a 2-Row core with CSF’s exclusive B-Tube Technology: Unlike a regular oval shape “O” type radiator tube, CSF uses a specially engineered tube in the shape of a “B”. These “B-tubes” are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal “O” shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes – producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With “B-tubes” you are able to get “dual liquid laminar flow”. CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.
CSF manufactures the most advanced and efficient radiator in the industry for your Evo/Civic/Custom Application. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
The CSF #2858XB is a universal cooling product and will require some custom work and/or fabrication to install. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- “Drop-in Fit” Requiring No Modifications to Install – Accepts All Attaching OEM Components Including “Quick Connect” Hoses, AC Condenser, Mounting Brackets and Fan Shroud
- Core Features an Ultra-Efficient Fin with 6.5mm Fin Height and Multi-Louvered Design for Maximum Surface Area Contact
- 2-Row 42mm Core (Dual Core) Featuring CSF’s Exclusive B-Tube Technology
- CNC Machined Brackets and Fittings for Superb Fit and Durability
- CNC Machined “Quick-Connect” Inlet/Outlet Connections
- Black Finish for High-End Stealth Look
- All-Aluminum Race Style Drain Plug
-
The unique design of CSF’s oil cooler line has distinct advantages over conventional style oil coolers (plate-type/stacked oil coolers). The oil coolers can be placed in tighter spaces or different areas of the vehicle that don’t have much vertical surface area. Longer rectangular sizes can also help with avoiding the stacking of too many coolers which may cause airflow issues to other components in the cooling system. Inlet/outlet port placement is much easier to route oil lines. Typical oil cooler lines have to be routed from different/opposite ends of the cooler often facing up or down. Usually one line has to run across from one side of the cooler to the other to then be routed together to the feed/return connection of the oil system. The CSF oil coolers are much more robust, durable, and can withstand a higher peak burst rate. This allows the cooler to be mounted in areas that might get high debris (front fascia, diff cooler, side vents, etc…). The CSF oil cooler is designed to withstand a tremendous amount of vibration and debris.
CSF offers the best and most advanced Oil Coolers on the market. So when it comes to keeping your engine oil temps down as you push your Vehicle / 73′ Porsche 911 RSR-Style Bumper hard on the street or track, a CSF is the obvious choice.
The CSF #8111 is a universal cooling product and will require some custom work and/or fabrication to install. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Universal style M22 x 1.50 female fittings on opposite sides (feed and return top and bottom adjacent w/ slight 15-degree angle for bumper clearance)
- Designed for direct-fitment as a front mount center oil cooler for Porsche 911/930 models (up to 1989) (For IROC-style or similar front bumper)
- Core dimensions: 21.50″L x 5.75″H x 2.25″W (541mm x 146mm x 55mm)
- Single-pass design (Porsche “RSR” front center mount oil cooler)
- For use with M30 / -16AN / -12AN union adapters.
- 10 rows of high pressure bar/plate oil cooling
- Dimensions: 24″L x 5.75″H x 2.25″W
- Fluid Capacity 0.89L (0.94 qt)
-
The unique design of CSF’s oil cooler line has distinct advantages over conventional style oil coolers (plate-type/stacked oil coolers). The oil coolers can be placed in tighter spaces or different areas of the vehicle that don’t have much vertical surface area. Longer rectangular sizes can also help with avoiding the stacking of too many coolers which may cause airflow issues to other components in the cooling system. Inlet/outlet port placement is much easier to route oil lines. Typical oil cooler lines have to be routed from different/opposite ends of the cooler often facing up or down. Usually one line has to run across from one side of the cooler to the other to then be routed together to the feed/return connection of the oil system. The CSF oil coolers are much more robust, durable, and can withstand a higher peak burst rate. This allows the cooler to be mounted in areas that might get high debris (front fascia, diff cooler, side vents, etc…). The CSF oil cooler is designed to withstand a tremendous amount of vibration and debris.
CSF offers the best and most advanced Oil Coolers on the market. So when it comes to keeping your engine oil temps down as you push your Universal / 73′ Porsche 911 RSR-Style Bumper hard on the street or track, a CSF is the obvious choice.
The CSF #8202 is a universal cooling product and will require some custom work and/or fabrication to install. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Satin Black Finish for Extreme Protection Against Corrosion and Debris
- “Aero-Flow” Bar Design for Lightweight, Strength, and Maximum Flow
- High Efficiency & Rugged Durability Bar/Plate Design
- Direct-Fit for Porsche ’73 RSR Style Front Bumper
- Triangular Flush Mounting Holes (M8 x 1.25)
- Optimized to Also Accept AN-16 Connections
- Core Surface: 18.9″ L x 4.72″ H x 2.25″ W
- Overall: 22″ L x 4.75″ H x 2.25″ W
- M22 x 1.5 Inlet/Outlet Connections
- Internal Radius for Maximum Flow
- Fluid Capacity 0.72L (0.76 qt)
- Pressure Tested at 120psi
- Single-Pass Oil Cooler
-
wind tunnel, vibration, thermal cycle, and burst pressure testing. Universal Fit Allows for Mounting in Multiple Different Configurations. The Triple-Pass Flow Structure allows the coolant to flow across the core of the radiator three times before exiting for lowest outlet temperatures possible. This radiator features a 2-Row core with CSF’s exclusive B-Tube Technology: Unlike a regular oval-shaped “O” type radiator tube, CSF uses a specially engineered tube in the shape of a “B”. These “B-tubes” are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal “O” shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes – producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With “B-tubes” you are able to get “dual liquid laminar flow”. CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.
CSF manufactures the most advanced and efficient radiator in the industry for your Vehicle. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
The CSF #8023 is a universal cooling product and will require some custom work and/or fabrication to install. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- All CSF High-Performance Radiators Undergo a Rigorous Testing Process During Development, Including Burst Pressure, Thermal Cycle, Vibration Testing, and Salt Spray Testing
- Triple-Pass Flow Configuration Allows Coolant to Flow Across the Core Three Times Before Exiting for Lowest Outlet Temperatures Possible
- Universal Fit Allows for Mounting in Multiple Different Configurations
- 8mm Tall Multi-Louvered Fins with CSF’s Exclusive B-Tube Technology
- True “Drop-in” Fit With No Modifications Necessary for Installation
- Track Tested and Proven by Formula Drift Champion, Michael Essa
- 29.3″L x 19.1″H x 2.55″W (not including an fittings)
- Black Powder-Coated Core for Thermal Rejection
- 100% All Aluminum TIG-Welded Construction
- Perfect for V-Mount Turbocharged Setups
- 2-Row 52mm Ultra High-Performance Core
- CNC Machined Mounting Brackets
- Individually Leak Tested
- 2-Year Limited Warranty
- Smooth Satin Finish
- -AN Fittings
-
CSF VW 16-20 GTI 2.0L Turbo / 16-18 Golf 1.8L Turbo / 15-19 Golf SportWagen 1.8L Turbo Radiator
-
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This 12″ x 5″ x 5″ Air-to-Water Core is rated for 1000 WHP and the perfect fit for your custom high-performance intercooler. Each CSF Intercooler core is pressure tested at 120psi for maximum reliability in extreme boost applications. Hand-Built using jigs & fixtures for a perfectly straight core in a clean room using gloves inside the CSF factory to ensure proper brazing and a clean surface for future welding. Featuring a multi-louvered high precision staggered fin design (for both ambient and pressure sides of the core) for the best heat transfer possible.
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This Air-to-Water Core is rated for 1000 WHP and the perfect fit for your custom high-performance intercooler.
The CSF #8084 is a universal cooling product and will require some custom work and/or fabrication to install. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Manufactured by Hand in a Clean Room Using Gloves Inside the CSF Cooling Factory to Ensure Proper Brazing and a Clean Surface for Future Welding
- Multi-Louvered High Precision Staggered Fin Design (for Both Ambient and Pressure Sides of the Core)
- Individually Boxed and Protected for Secure Transport Through Single Piece Mail Services
- Batch Brazed in CSF’s State-of-the-Art Digital Vacuum Brazing Oven (12 Ovens in Total)
- Strict Quality Control and Quality Testing, Including Individual Pressure Testing
- Hand-Built Using Jigs & Fixtures for a Perfectly Straight Core for Easy Welding
- Pressure Tested at 120psi for Maximum Reliability in Extreme Boost Applications
- Dimensions: 12″x5″x5″ (305mm x 123mm x 125mm)
- Heavy-Duty Bar & Plate Intercooler Cores
- HP Rating: 1000
- Air-to-Water
-
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This 12″ x 6″ x 6″ Air-to-Water Core is rated for 1500 WHP and the perfect fit for your custom high-performance intercooler. Each CSF Intercooler core is pressure tested at 120psi for maximum reliability in extreme boost applications. Hand-Built using jigs & fixtures for a perfectly straight core in a clean room using gloves inside the CSF factory to ensure proper brazing and a clean surface for future welding. Featuring a multi-louvered high precision staggered fin design (for both ambient and pressure sides of the core) for the best heat transfer possible.
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This Air-to-Water Core is rated for 1500 WHP and the perfect fit for your custom high-performance intercooler.
The CSF #8085 is a universal cooling product and will require some custom work and/or fabrication to install. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Manufactured by Hand in a Clean Room Using Gloves Inside the CSF Cooling Factory to Ensure Proper Brazing and a Clean Surface for Future Welding
- Multi-Louvered High Precision Staggered Fin Design (for Both Ambient and Pressure Sides of the Core)
- Individually Boxed and Protected for Secure Transport Through Single Piece Mail Services
- Batch Brazed in CSF’s State-of-the-Art Digital Vacuum Brazing Oven (12 Ovens in Total)
- Strict Quality Control and Quality Testing, Including Individual Pressure Testing
- Hand-Built Using Jigs & Fixtures for a Perfectly Straight Core for Easy Welding
- Pressure Tested at 120psi for Maximum Reliability in Extreme Boost Applications
- Dimensions: 12″x6″x6″ (305mm x 150mm x 150mm)
- Heavy-Duty Bar & Plate Intercooler Cores
- HP Rating: 1500
- Air-to-Water
-
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This 8.5″ x 6″ x 6″ Air-to-Water Core is rated for 1000 WHP and the perfect fit for your custom high-performance intercooler. Each CSF Intercooler core is pressure tested at 120psi for maximum reliability in extreme boost applications. Hand-Built using jigs & fixtures for a perfectly straight core in a clean room using gloves inside the CSF factory to ensure proper brazing and a clean surface for future welding. Featuring a multi-louvered high precision staggered fin design (for both ambient and pressure sides of the core) for the best heat transfer possible.
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This Air-to-Water Core is rated for 1000 WHP and the perfect fit for your custom high-performance intercooler.
The CSF #8113 is a universal cooling product and will require some custom work and/or fabrication to install. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Manufactured by Hand in a Clean Room Using Gloves Inside the CSF Cooling Factory to Ensure Proper Brazing and a Clean Surface for Future Welding
- Multi-Louvered High Precision Staggered Fin Design (for Both Ambient and Pressure Sides of the Core)
- Individually Boxed and Protected for Secure Transport Through Single Piece Mail Services
- Batch Brazed in CSF’s State-of-the-Art Digital Vacuum Brazing Oven (12 Ovens in Total)
- Strict Quality Control and Quality Testing, Including Individual Pressure Testing
- Hand-Built Using Jigs & Fixtures for a Perfectly Straight Core for Easy Welding
- Pressure Tested at 120psi for Maximum Reliability in Extreme Boost Applications
- Dimensions: 8.5″x6″x6″ (215mm x 150mm x 150mm)
- Heavy-Duty Bar & Plate Intercooler Cores
- HP Rating: 1000
- Air-to-Water
-
CSF’s 42mm 2-Row aluminum core is a massive improvement over the factory core. The combination of a thicker core, second cooling row, and increased fluid capacity drastically improves the amount of heat the system can absorb and dissipate. CSF’s Exclusive B-Tube Technology increases the heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible cooling performance.
The MK6 Fiesta ST’s factory cooling system was always a problem with the car having overheating issues even when completely stock. The best solution is a High Performance All-Aluminum Radiator from CSF.
The CSF #7237 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Triple Pass Flow Configuration Allows Coolant to Flow Across the Core Three Times Before Exiting for Lowest Outlet Temperatures Possible
- 6.5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact
- True Plug-and-Play “Drop-in Fit” Installation Requires Absolutely No Modifications
- Cooling Tubes with CSF’s Exclusive B-Tube Technology
- 100% All Aluminum TIG-Welded Construction
- 1-Row – 31mm Ultra-High-Performance Core
- CNC Machined Mounting Pins and Brackets
- Individually Leak and Pressure Tested
- 2-Year Limited Warranty
- OEM Style Inlet/Outlet
Showing 21901–21912 of 83665 results