-
A high-horsepower Evo demands an intercooler that provides optimal airflow and a cool, dense charge of air. Modified vehicles running high-boost pressures often suffer from increased air intake temperatures (AITs) and heat soak, which can result in diminished performance. Keep your intake temperatures under control with the Mishimoto Lancer Evolution X Performance Intercooler. This intercooler is a direct bolt-on unit engineered specifically for the Evo X. Thanks to an efficient 3.5-inch thick bar-and-plate core, this intercooler provides optimal heat dissipation and low AITs. The robust cast aluminum end tanks provide superior durability and smooth, uninterrupted airflow. The Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler provides a dyno-proven increase of 10 hp and 10 tq, and it will support modified vehicles up to 600 hp! This intercooler core is equipped with a strategic fin design that promotes substantial heat exchange while providing minimal pressure loss across the core. Whether you are making a pass at the drag strip or sliding around a rally stage, this intercooler will provide the cooling that your engine needs to perform at its best. This intercooler is available with a powder-coated finish in either silver or stealth black. As with all our products, this intercooler includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.
2010-2011 Mitsubishi Lancer Evolution GSR 2.0 Liter TC-SST, 2008 Mitsubishi Lancer Evolution GSR 2.0 Liter W5M6A, 2010-2014 Mitsubishi Lancer Evolution GSR 2.0 Liter W5M6A, 2008 Mitsubishi Lancer Evolution MR 2.0 Liter TC-SST, 2010-2014 Mitsubishi Lancer Evolution MR 2.0 Liter TC-SST, 2010-2011 Mitsubishi Lancer Evolution MR Touring 2.0 Liter TC-SST- Full aluminum cast end tanks provide increased durability and smooth, uninterrupted airflow
- Efficient 3.5-in thick bar-and-plate core provides optimal heat dissipation and low AITs
- 10 whp and 10 tq bolt-on power increase
-
A high-horsepower Evo demands an intercooler that provides optimal airflow and a cool, dense charge of air. Modified vehicles running high-boost pressures often suffer from increased air intake temperatures (AITs) and heat soak, which can result in diminished performance. Keep your intake temperatures under control with the Mishimoto Lancer Evolution X Performance Intercooler. This intercooler is a direct bolt-on unit engineered specifically for the Evo X. Thanks to an efficient 3.5-inch thick bar-and-plate core, this intercooler provides optimal heat dissipation and low AITs. The robust cast aluminum end tanks provide superior durability and smooth, uninterrupted airflow. The Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler provides a dyno-proven increase of 10 hp and 10 tq, and it will support modified vehicles up to 600 hp! This intercooler core is equipped with a strategic fin design that promotes substantial heat exchange while providing minimal pressure loss across the core. Whether you are making a pass at the drag strip or sliding around a rally stage, this intercooler will provide the cooling that your engine needs to perform at its best. This intercooler is available with a powder-coated finish in either silver or stealth black. As with all our products, this intercooler includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.
2010-2011 Mitsubishi Lancer Evolution GSR 2.0 Liter TC-SST, 2008 Mitsubishi Lancer Evolution GSR 2.0 Liter W5M6A, 2010-2014 Mitsubishi Lancer Evolution GSR 2.0 Liter W5M6A, 2008 Mitsubishi Lancer Evolution MR 2.0 Liter TC-SST, 2010-2014 Mitsubishi Lancer Evolution MR 2.0 Liter TC-SST, 2010-2011 Mitsubishi Lancer Evolution MR Touring 2.0 Liter TC-SST- Full aluminum cast end tanks provide increased durability and smooth, uninterrupted airflow
- Efficient 3.5-in thick bar-and-plate core provides optimal heat dissipation and low AITs
- 10 whp and 10 tq bolt-on power increase
-
Get that plastic blob of an overflow tank out of your engine bay. Stock plastic tanks are prone to failure due to repeated hot and cold cycles, and they create a horrible eyesore as they lurk in your engine bay. Mishimoto’s 2008+ STI / WRX coolant overflow tank is constructed from durable, TIG-welded aluminum for optimal durability and longevity. Included with this STI / WRX coolant overflow tank is a CNC-machined dipstick to allow for easy checking of coolant levels. With the choice of two finishes, polished and anodized black, this tank will have no problem matching the style of your engine bay. This STI / WRX coolant overflow tank fits perfectly with the stock or Mishimoto STI / WRX radiators. As with all Mishimoto STI and WRX parts, this overflow tank includes the Mishimoto Lifetime Warranty.
Engine coolant reservoir designed to store and regulate excess coolant for proper system operation. Durable construction resists heat and pressure, helping prevent leaks and maintain optimal temperature.
2015-2016 Subaru WRX Base 2.0 Liter TY751, 2015-2016 Subaru WRX Limited 2.0 Liter TR690, 2015-2016 Subaru WRX Limited 2.0 Liter TY751, 2015-2016 Subaru WRX Premium 2.0 Liter TR690, 2015-2016 Subaru WRX Premium 2.0 Liter TY751, 2015-2016 Subaru WRX STI Base 2.5 Liter TY856, 2015 Subaru WRX STI Launch Edition 2.5 Liter TY856, 2015-2016 Subaru WRX STI Limited 2.5 Liter TY856, 2016 Subaru WRX STI Series.HyperBlue 2.5 Liter TY856- All-aluminum, fully welded construction for maximum durability during repeated cold and hot transitions
- Dipstick allows for proper cold coolant levels
- Installs in under 30 minutes
-
Add some quick horsepower to your WRX or STI with the new Mishimoto Subaru WRX/STI Performance Air Intake. This kit is engineered specifically for your 2008+ Subaru WRX or STI and includes everything needed to replace the restrictive factory airbox. Our engineers spent months fine-tuning this design in an attempt to squeak out every last bit of performance. This dyno-proven air intake provides 25 hp/25 tq gains over the OEM intake while maintaining safe air/fuel ratios, perfect for some extra punch on the street or autocross course. The Mishimoto Subaru WRX/STI Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the factory tune. The mandrel bent aluminum intake pipe is available with a red or black powder-coated finish or a polished aluminum finish. This pipe utilizes the Mishimoto air straightener and CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures (IATs), the air filter has been placed outside the hot engine bay, and a powder-coated heat shield prevents any heat-soak from occurring. The Mishimoto free-flowing air filter provides a 16-percent greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the factory intake. The Mishimoto Subaru WRX/STI Performance Air Intake is made in the USA and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.
2009 Subaru Forester XT 2.5 Liter, 2009-2010 Subaru Forester XT Limited 2.5 Liter, 2010-2013 Subaru Forester XT Premium 2.5 Liter, 2011-2013 Subaru Forester XT Touring 2.5 Liter, 2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2008 Subaru Impreza WRX 2.5 Liter TZ1B8, 2010-2014 Subaru Impreza WRX Limited 2.5 Liter TY758, 2009-2014 Subaru Impreza WRX Premium 2.5 Liter TY758, 2008-2014 Subaru Impreza WRX STI 2.5 Liter TY856, 2011-2014 Subaru Impreza WRX STI Limited 2.5 Liter TY856, 2010 Subaru Impreza WRX STI Special Edition 2.5 Liter TY856- Mandrel-bent aluminum intake pipe with air straightener and CNC-machined MAF housing
- Dyno-proven gains of 25 hp/ 25 tq at 5300 rpm
- Eliminates restrictions and improves airflow
-
Add some quick horsepower to your WRX or STI with the new Mishimoto Subaru WRX/STI Performance Air Intake. This kit is engineered specifically for your 2008+ Subaru WRX or STI and includes everything needed to replace the restrictive factory airbox. Our engineers spent months fine-tuning this design in an attempt to squeak out every last bit of performance. This dyno-proven air intake provides 25 hp/25 tq gains over the OEM intake while maintaining safe air/fuel ratios, perfect for some extra punch on the street or autocross course. The Mishimoto Subaru WRX/STI Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the factory tune. The mandrel bent aluminum intake pipe is available with a red or black powder-coated finish or a polished aluminum finish. This pipe utilizes the Mishimoto air straightener and CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures (IATs), the air filter has been placed outside the hot engine bay, and a powder-coated heat shield prevents any heat-soak from occurring. The Mishimoto free-flowing air filter provides a 16-percent greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the factory intake. The Mishimoto Subaru WRX/STI Performance Air Intake is made in the USA and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.
2009 Subaru Forester XT 2.5 Liter, 2009-2010 Subaru Forester XT Limited 2.5 Liter, 2010-2013 Subaru Forester XT Premium 2.5 Liter, 2011-2013 Subaru Forester XT Touring 2.5 Liter, 2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2008 Subaru Impreza WRX 2.5 Liter TZ1B8, 2010-2014 Subaru Impreza WRX Limited 2.5 Liter TY758, 2009-2014 Subaru Impreza WRX Premium 2.5 Liter TY758, 2008-2014 Subaru Impreza WRX STI 2.5 Liter TY856, 2011-2014 Subaru Impreza WRX STI Limited 2.5 Liter TY856, 2010 Subaru Impreza WRX STI Special Edition 2.5 Liter TY856- Mandrel-bent aluminum intake pipe with air straightener and CNC-machined MAF housing
- Dyno-proven gains of 25 hp/ 25 tq at 5300 rpm
- Eliminates restrictions and improves airflow
-
Add some quick horsepower to your WRX or STI with the new Mishimoto Subaru WRX/STI Performance Air Intake. This kit is engineered specifically for your 2008+ Subaru WRX or STI and includes everything needed to replace the restrictive factory airbox. Our engineers spent months fine-tuning this design in an attempt to squeak out every last bit of performance. This dyno-proven air intake provides 25 hp/25 tq gains over the OEM intake while maintaining safe air/fuel ratios, perfect for some extra punch on the street or autocross course. The Mishimoto Subaru WRX/STI Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the factory tune. The mandrel bent aluminum intake pipe is available with a red or black powder-coated finish or a polished aluminum finish. This pipe utilizes the Mishimoto air straightener and CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures (IATs), the air filter has been placed outside the hot engine bay, and a powder-coated heat shield prevents any heat-soak from occurring. The Mishimoto free-flowing air filter provides a 16-percent greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the factory intake. The Mishimoto Subaru WRX/STI Performance Air Intake is made in the USA and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.
2009 Subaru Forester XT 2.5 Liter, 2009-2010 Subaru Forester XT Limited 2.5 Liter, 2010-2013 Subaru Forester XT Premium 2.5 Liter, 2011-2013 Subaru Forester XT Touring 2.5 Liter, 2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2008 Subaru Impreza WRX 2.5 Liter TZ1B8, 2010-2014 Subaru Impreza WRX Limited 2.5 Liter TY758, 2009-2014 Subaru Impreza WRX Premium 2.5 Liter TY758, 2008-2014 Subaru Impreza WRX STI 2.5 Liter TY856, 2011-2014 Subaru Impreza WRX STI Limited 2.5 Liter TY856, 2010 Subaru Impreza WRX STI Special Edition 2.5 Liter TY856- Mandrel-bent aluminum intake pipe with air straightener and CNC-machined MAF housing
- Dyno-proven gains of 25 hp/ 25 tq at 5300 rpm
- Eliminates restrictions and improves airflow
-
Free up some engine bay space with the Mishimoto Subaru WRX/STI Plug-N-Play Aluminum Fan Shroud Kit! This kit bolts directly to your stock or Mishimoto performance radiator, and works perfectly with the OEM coolant overflow tank. The brushed aluminum fan shroud is preassembled with two 12-inch high-flow fans, and prewired with factory-style connectors. This plug-n-play kit requires zero splicing, soldering, or crimping and bolts into place just like the stock fan shroud setup. Each fan provides over 1150 CFM of airflow, which effectively keeps hot engine temperatures at bay. Thanks to a slim profile, this fan shroud has a maximum depth of just 3.5-inch that saves significantly more engine bay space. This kit includes all hardware for installation and the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
High-performance component designed to enhance thermal efficiency, durability, and reliability under demanding conditions. Engineered to support optimal temperature control and system performance across applications.- Includes two Mishimoto 12-in slim fans, each flowing over 1,100 CFM
- Direct plug-n-play for the 2008-2015 Subaru WRX/STI
- Fans are prewired with stock-style connectors
-
Get that plastic blob of an overflow tank out of your engine bay. Stock plastic tanks are prone to failure due to repeated hot and cold cycles, and they create a horrible eyesore as they lurk in your engine bay. Mishimoto’s 2008+ STI / WRX coolant overflow tank is constructed from durable, TIG-welded aluminum for optimal durability and longevity. Included with this STI / WRX coolant overflow tank is a CNC-machined dipstick to allow for easy checking of coolant levels. With the choice of two finishes, polished and anodized black, this tank will have no problem matching the style of your engine bay. This STI / WRX coolant overflow tank fits perfectly with the stock or Mishimoto STI / WRX radiators. As with all Mishimoto STI and WRX parts, this overflow tank includes the Mishimoto Lifetime Warranty.
Engine coolant reservoir designed to store and regulate excess coolant for proper system operation. Durable construction resists heat and pressure, helping prevent leaks and maintain optimal temperature.
2015-2016 Subaru WRX Base 2.0 Liter TY751, 2015-2016 Subaru WRX Limited 2.0 Liter TR690, 2015-2016 Subaru WRX Limited 2.0 Liter TY751, 2015-2016 Subaru WRX Premium 2.0 Liter TR690, 2015-2016 Subaru WRX Premium 2.0 Liter TY751, 2015-2016 Subaru WRX STI Base 2.5 Liter TY856, 2015 Subaru WRX STI Launch Edition 2.5 Liter TY856, 2015-2016 Subaru WRX STI Limited 2.5 Liter TY856, 2016 Subaru WRX STI Series.HyperBlue 2.5 Liter TY856- All-aluminum, fully welded construction for maximum durability during repeated cold and hot transitions
- Dipstick allows for proper cold coolant levels
- Installs in under 30 minutes
-
Rubber radiator hoses are prone to dry rot, cracking, and leaking, and nobody wants to find a coolant puddle under their car, or worse yet, spring a leak while driving. Get ahead of the game for your 2008-2009 Pontiac G8 GT 6.0L and upgrade your factory radiator hoses to durable, high performance silicone hoses. The Mishimoto Silicone Radiator Hose Kit is a direct fit replacement and includes the upper and lower radiator hoses and high-quality worm-gear clamps for ease of installation. Unlike the degradation-prone factory rubber hoses on your 6.0L, Mishimoto silicone radiator hoses are constructed from five layers of high-grade silicone with heat-resistant embedded fibers, providing unrivaled durability, heat resistance, and pressure tolerance. Available in black, blue, and red, not only is this a great upgrade that provides you with long-lasting durability, but you can also add a pop of color and style to your engine bay! Like all our parts, this Mishimoto Silicone Radiator Hose Kit is backed by our Mishimoto Lifetime Warranty.
Complete radiator coolant hose kit designed to maintain proper coolant flow and system pressure. Includes durable, heat-resistant hoses for leak prevention, reliable performance, and a precise, easy installation.- Constructed from five layers of high-grade silicone with heat-resistant embedded fibers
- Replaces old, dry-rot-prone factory rubber hoses
- Improves heat and pressure tolerance
-
Rubber radiator hoses are prone to dry rot, cracking, and leaking, and nobody wants to find a coolant puddle under their car, or worse yet, spring a leak while driving. Get ahead of the game for your 2008-2009 Pontiac G8 GT 6.0L and upgrade your factory radiator hoses to durable, high performance silicone hoses. The Mishimoto Silicone Radiator Hose Kit is a direct fit replacement and includes the upper and lower radiator hoses and high-quality worm-gear clamps for ease of installation. Unlike the degradation-prone factory rubber hoses on your 6.0L, Mishimoto silicone radiator hoses are constructed from five layers of high-grade silicone with heat-resistant embedded fibers, providing unrivaled durability, heat resistance, and pressure tolerance. Available in black, blue, and red, not only is this a great upgrade that provides you with long-lasting durability, but you can also add a pop of color and style to your engine bay! Like all our parts, this Mishimoto Silicone Radiator Hose Kit is backed by our Mishimoto Lifetime Warranty.
Complete radiator coolant hose kit designed to maintain proper coolant flow and system pressure. Includes durable, heat-resistant hoses for leak prevention, reliable performance, and a precise, easy installation.- Constructed from five layers of high-grade silicone with heat-resistant embedded fibers
- Replaces old, dry-rot-prone factory rubber hoses
- Improves heat and pressure tolerance
-
Rubber radiator hoses are prone to dry rot, cracking, and leaking, and nobody wants to find a coolant puddle under their car, or worse yet, spring a leak while driving. Get ahead of the game for your 2008-2009 Pontiac G8 GT 6.0L and upgrade your factory radiator hoses to durable, high performance silicone hoses. The Mishimoto Silicone Radiator Hose Kit is a direct fit replacement and includes the upper and lower radiator hoses and high-quality worm-gear clamps for ease of installation. Unlike the degradation-prone factory rubber hoses on your 6.0L, Mishimoto silicone radiator hoses are constructed from five layers of high-grade silicone with heat-resistant embedded fibers, providing unrivaled durability, heat resistance, and pressure tolerance. Available in black, blue, and red, not only is this a great upgrade that provides you with long-lasting durability, but you can also add a pop of color and style to your engine bay! Like all our parts, this Mishimoto Silicone Radiator Hose Kit is backed by our Mishimoto Lifetime Warranty.
Complete radiator coolant hose kit designed to maintain proper coolant flow and system pressure. Includes durable, heat-resistant hoses for leak prevention, reliable performance, and a precise, easy installation.- Constructed from five layers of high-grade silicone with heat-resistant embedded fibers
- Replaces old, dry-rot-prone factory rubber hoses
- Improves heat and pressure tolerance
-
Whether you’re carving through back roads in your WRX or pushing your STI to the limit on track day, maintaining optimal coolant temperatures is essential to protecting your EJ engine. The factory radiator’s plastic end tanks and limited cooling capacity can quickly become a weak link, especially under the high demands of spirited driving or hot summer commutes. A failure in the cooling system can lead to overheating, head gasket issues, and costly repairs that cut your driving adventures short. The Mishimoto Performance Aluminum Radiator for the 2008–2014 Subaru WRX and 2008–2021 Subaru STI is engineered to be the ultimate safeguard for your engine, delivering improved cooling efficiency and durability over stock. — Built with a lightweight, dual-core design and 100% brazed aluminum construction, this radiator maximizes heat dissipation and withstands higher pressures to keep your engine performing at its best. The TIG-welded, polished end tanks add strength and a premium finish, while the direct-fit design ensures a straightforward installation with no cutting or modification required. The included high-pressure 1.3 bar radiator cap raises the boiling point of your coolant for an extra margin of safety under heavy loads, and a second radiator cap is included for use on the expansion tank. With up to a 30% increase in cooling efficiency over the factory unit, this upgrade is ideal for daily driving, spirited runs, or competitive use. — Backed by the Mishimoto Lifetime Warranty, including accident protection, this radiator is built to keep your Subaru running strong for years to come.
Aluminum radiator engineered for efficient heat dissipation and optimal engine cooling. Precision-fit design ensures easy installation, corrosion resistance, and reliable performance across varied driving conditions.
2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2008-2014 Subaru Impreza WRX 2.5 Liter TY758, 2010-2014 Subaru Impreza WRX Limited 2.5 Liter TY758, 2010-2014 Subaru Impreza WRX Limited 2.5 Liter TY758, 2010-2014 Subaru Impreza WRX Limited 2.5 Liter TY758, 2010-2014 Subaru Impreza WRX Limited 2.5 Liter TY758, 2010-2014 Subaru Impreza WRX Limited 2.5 Liter TY758, 2009-2014 Subaru Impreza WRX Premium 2.5 Liter TY758, 2009-2014 Subaru Impreza WRX Premium 2.5 Liter TY758, 2009-2014 Subaru Impreza WRX Premium 2.5 Liter TY758, 2009-2014 Subaru Impreza WRX Premium 2.5 Liter TY758, 2009-2014 Subaru Impreza WRX Premium 2.5 Liter TY758, 2009-2014 Subaru Impreza WRX Premium 2.5 Liter TY758, 2008-2014 Subaru Impreza WRX STI 2.5 Liter TY856, 2008-2014 Subaru Impreza WRX STI 2.5 Liter TY856, 2008-2014 Subaru Impreza WRX STI 2.5 Liter TY856, 2008-2014 Subaru Impreza WRX STI 2.5 Liter TY856, 2008-2014 Subaru Impreza WRX STI 2.5 Liter TY856, 2008-2014 Subaru Impreza WRX STI 2.5 Liter TY856, 2008-2014 Subaru Impreza WRX STI 2.5 Liter TY856, 2011-2014 Subaru Impreza WRX STI Limited 2.5 Liter TY856, 2011-2014 Subaru Impreza WRX STI Limited 2.5 Liter TY856, 2011-2014 Subaru Impreza WRX STI Limited 2.5 Liter TY856, 2011-2014 Subaru Impreza WRX STI Limited 2.5 Liter TY856, 2010 Subaru Impreza WRX STI Special Edition 2.5 Liter TY856, 2005-2006 Subaru Legacy GT 2.5 Liter TY757, 2005-2006 Subaru Legacy GT 2.5 Liter TY757, 2005 Subaru Legacy GT Limited 2.5 Liter TY757, 2007 Subaru Legacy GT Limited 2.5 Liter TY757, 2005 Subaru Legacy GT Limited 2.5 Liter TY757, 2007 Subaru Legacy GT Limited 2.5 Liter TY757, 2008-2009 Subaru Legacy GT Limited 2.5 Liter TY758, 2008-2009 Subaru Legacy GT Limited 2.5 Liter TY758 …See Application Guide for Additional Fitments- Increased coolant capacity directly results in improved cooling efficiency
- Full aluminum construction features durable, TIG-welded end tanks
- Features a two-row, 1.65 thick brazed aluminum core
Showing 21001–21012 of 26749 results