Shop

The 57-1142 scoop system is designed to provide your engine with a higher volume of fresh air, and helps keep the clutch cool using a heat-resistant HDPE scoop and water-resistant DRYCHARGER pre-filter. The CAD-designed scoop replaces the factory dust cover, and is engineered for durability in dirty, sandy environments. The included DRYCHARGER pre-filter helps provide additional protection from dirt and moisture. Installation can typically be completed in less than 30 minutes with only basic hand tools, and all necessary hardware is included. Buy with confidence under the K&N 10-Year/Million Mile Limited Warranty. Legal in all 50 States.
The 57-1142 scoop system is designed to provide your engine with a higher volume of fresh air, and helps keep the clutch cool through the use of a heat-resistant HDPE scoop and water-resistant DRYCHARGER pre-filter.

• K&N 10-Year/Million Mile Limited Warranty™
• 10-Year/Million Mile Limited Warranty

The K&N 57-1141 cold air intake system replaces the factory air filter and air intake housing in many Can-Am Maverick models for a guaranteed increase in horsepower and torque. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine. The system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media, which is protected by a foam wrap and an enclosed filter housing for additional protection from heat and the elements. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. Can typically be installed in 90 minutes or less using standard hand tools. Legal in all 50 States.
K&N’s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow.

• K&N Million Mile Limited Warranty
• 50 State legal

The K&N 57-3098 FIPK air intake system replaces the restrictive factory air filter and air intake tubing while retaining the factory air box on select Chevrolet, GMC, and Cadillac models. K&N air intakes are designed to dramatically reduce air intake restriction as they smooth and straighten air flow for a guaranteed horsepower gain. This allows your engine to inhale a larger amount of air than the factory air filter and air intake assembly. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a replacement K&N high-flow air filter and an aerodynamically engineered intake tube that easily connects to your vehicle’s factory air box and throttle body. The air filter can be used for up to 50,000 miles before servicing is needed depending on driving conditions. This air intake system is designed for quick and easy installation with commonly available tools.
K&N’s easy to install air intake systems replace the restrictive factory air filter and air intake tubing allowing for virtually unrestricted air flow. This power gaining air intake comes with K&N’s famous million mile limited warranty.

• K&N Million Mile Limited Warranty

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
K&N’s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque, and are protected by the K&N No-Hassle Lifetime Limited Warranty.

• K&N Million Mile Limited Warranty
• Will not void vehicle warranty

An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and the air box lid allows for quick and easy access to the filter without tools. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design of the filter allows you to go up to 100,000 miles between filter services under normal highway driving conditions. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
K&N’s enclosed air box roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque, and are protected by the K&N No-Hassle Lifetime Limited Warranty.

• Engineered to provide high airflow and exceptional filtration
• K&N Million Mile Limited Warranty

K&N NextGen Diesel Dryflow cold air intake systems feature a high-density polyethylene (HDPE) rotationally molded tube designed to help increase the volume of airflow to your engine and provide an increase in horsepower and torque with no tune required. This intake system is paired with a washable, reusable Dryflow LIFETIME Air Filter featuring an oil-free synthetic media. The oversized, conical design allows you to go up to 50,000 miles between filter services under normal highway driving conditions and has an easy oil-free two step cleaning process for convenience. A custom designed NextGen air box helps protect air intake from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

• Engineered for Convenience: NextGen Dryflow® synthetic media delivers up to 99% filtration efficiency and features an easy, two-step cleaning process that requires no oil, making maintenance more convenient.

K&N NextGen Diesel Dryflow cold air intake systems feature a high-density polyethylene (HDPE) rotationally molded tube designed to help increase the volume of airflow to your engine and provide an increase in horsepower and torque with no tune required. This intake system is paired with a washable, reusable Dryflow LIFETIME Air Filter featuring an oil-free synthetic media. The oversized, conical design allows you to go up to 50,000 miles between filter services under normal highway driving conditions and has an easy oil-free two step cleaning process for convenience. A custom designed NextGen air box helps protect air intake from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

• Engineered for Convenience: NextGen Dryflow® synthetic media delivers up to 99% filtration efficiency and features an easy, two-step cleaning process that requires no oil, making maintenance more convenient.

The K&N 57-3104 FIPK air intake system replaces the restrictive factory air filter and air intake tubing while retaining the factory air box on specific Chevrolet Colorado models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow for a guaranteed horsepower gain. This allows your engine to inhale a larger amount of air than the factory air filter and air intake assembly. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a replacement K&N high-flow air filter and an aerodynamically engineered intake tube that easily connects to your vehicle’s factory air box and throttle body. The air filter can be used for up to 50,000 miles before servicing is needed depending on driving conditions. This air intake system is designed for quick and easy installation with commonly available tools.
K&N’s easy to install air intake systems replace the restrictive factory air filter and air intake tubing allowing for virtually unrestricted air flow. This power gaining air intake comes with K&N’s famous million mile limited warranty.

• K&N Million Mile Limited Warranty

This K&N NextGen cold air intake system is engineered for Ford F150/F150 Raptor V6 3.5L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 59.01% CFM GAIN (driver side) & 38.3% CFM GAIN (passenger side) to your engine and provides an increase of 32.38 horsepower and 35.52 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

• Precision-Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.