0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $
K&N performance cold air intake with black plastic housing and a red-framed cone filter
Black handheld automotive diagnostic scanner with a rectangular display and a curved grip; a plug-style connector extends from the end.
Car air intake duct with a curved elbow and mounting flange.
Car engine bay with battery, coolant reservoir, large air intake, and engine cover visible from front of vehicle.
Close-up of a car engine bay showing a black plastic air intake housing with a red-and-purple K&N air filter visible in the intake.
Exploded view of a car cold air intake kit showing the intake pipe, red conical filter, clamps, and housing.
K&N performance car air intake with a black plastic tube and pink-filter, shown beside its black-and-orange box.

K&N 17-20 Ford F150/Raptor V6 3.5L NextGen Cold Air Intake

This K&N NextGen cold air intake system is engineered for Ford F150/F150 Raptor V6 3.5L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 59.01% CFM GAIN (driver side) & 38.3% CFM GAIN (passenger side) to your engine and provides an increase of 32.38 horsepower and 35.52 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

  • Precision-Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.

616.17 $

SKU 50-2609
brand K&N Engineering
Add to wishlist Add to compare

Description

This K&N NextGen cold air intake system is engineered for Ford F150/F150 Raptor V6 3.5L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 59.01% CFM GAIN (driver side) & 38.3% CFM GAIN (passenger side) to your engine and provides an increase of 32.38 horsepower and 35.52 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

  • Precision-Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.

Specification

Weight 14.9 kg
Dimensions 24.1 × 23.9 × 19.4 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

t
units_per_sku

1
upc

024844416698
brand

K&N Engineering
part_number

50-2609

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 58-10005D

    aFe Black Series Stage-2 Carbon Fiber Cold Air Intake System w/ Pro DRY S Media – 18-19 BMW M5 (F90)

    No Reviews

    These 7″ tall, 360-degree radial flow air filters were specially designed to be installed through the M5’s strut braces, maximizing airflow and making for an easy installation. They feature our oil-free Pro DRY S media with three layers of progressively finer synthetic media for maximum convenience. This media is perfect for street use. The air filters are surrounded by heat-resistant XLPE polymer housings. Covers, constructed from 100% twill weave carbon fiber, are secured to the housings with premium aFe POWER branded hardware – making for an aggressive style and simple air filter inspection. Lightweight, high gloss, twill weave carbon fiber tubes direct filtered air from the air filters to the engine. Using computer design software and dyno tuning, they’re designed to achieve maximum power gains while maintaining a perfect fit. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, premium hardware, and a Black Series plate are included. Optional 100% carbon fiber Dynamic Air Scoops (sold separately P/N: 58-10005SC) are available to bring more cool air from the kidney grilles into the intake housings
    Black Series Stage-2 Carbon Fiber Cold Air Intake System w/ Pro DRY S Filter BMW M5 (F90) 18-23 V8-4.4L (t) S63

    • Carbon Fiber Air Scoops (Sold Separately P/N: 58-10005SC) Direct Cool Air to Intake System From Kidney Grilles
    • Premium aFe POWER Branded Laser-Etched Hardware and Exclusive Black Series Plate Included
    • Washable and Reusable Pro DRY S Air Filters for Maximum Convenience
    • Tubes w/ Heat Resistant Plastic Housings
    2,000.55 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 54-83043R

    aFe Magnum Force Stage-2Si Cold Air Intake System w/ Pro 5R Media BMW X5 (F15) / X6 (F16) 14-19 3.0L

    No Reviews

    Large Five Layer Performance Air Filter: This 360-degree radial flow air filter features a 3-1/4″ x 6-1/2″ flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is best suited for street use.
    Unique Sealed Housing: The one-piece sealed housing, constructed of XLPE (cross-linked polyethylene) polymer, is used to minimize the number of components and ensure the coolest air intake charge available.
    Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.
    Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps and hardware are included. Its revolutionary design uses half the number of parts of a traditional cold air intake system.
    Magnum FORCE Stage-2Si Cold Air Intake System w/ Pro 5R Filter BMW X5 (E70/F15)/X6 (E71/F16) 11-19 3.0L (t) N55

    • Oversized, Heat-Resistant Sealed Housing Gathers Larger Amounts of Cool Air
    • Washable and Reusable Pro 5R Air Filter
    • Measured Flow: 350 CFM @ 7 IN H2O
    • Outflows Factory Intake by 15%
    • +51 lbs. x ft. TQ & +24 HP
    655.89 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SP1111WB

    Injen 01-06 BMW 330i E46 3.0L (M54) L-6 Wrinkle Black Short Ram Intake w/ Enc Heat Shield & Adapter

    No Reviews

    Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
    Short Ram Air Intake System; Incl. Heat Shield w/Top Lid/Filter/Hardware/Instruction; HP Gains +11.0 HP/Torque Gains +10.0 ft. lbs.; Wrinkle Black;
    BMW 2001-06 E46 330i 3.0L L6 M54 enigne Tuned short ram with brushed heatshield cover and Super nano web dry filter

    • This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
    • Smooth intake piping eliminates restrictions and improves airflow
    • Includes custom heat shield with high-flow velocity stack
    • Dyno Proven gains of up to 10 hp and 10 lb-ft. of torque
    • Fully serviceable Injen SuperNano-Web dry air filter
    • Provides power gains while maintaining A/F ratios
    • Replacement air filter part number X-1045-BB
    • Aggressive engine tone under full throttle
    • Injen Technology Limited Lifetime Warranty
    • Optional hydroshield part number 1052BLK
    • Increased Torque up to 10 ft./lbs.
    • 6061-T6 aluminum intake tubing
    • Available in multiple finishes
    • Made in Pomona, California USA
    • No additional tuning required
    • Short Ram Air Intake Design
    376.05 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 57-10006R

    aFe Track Series Stg 2 Carbon Fiber Intake w/Pro 5R Media 15-20 BMW M3/M4(F80/82/83) L6-3.0L(tt) S55

    No Reviews

    Large Five Layer Performance Air Filters: These 6″ tall 360-degree radial flow air filters feature our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. This media provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases, making it perfect for street and/or track use. Their inverted top makes for more filter surface area, resulting in longer service intervals. Dyno-Tuned Intake Tubes: This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their durable black XLPE material is heat soak resistant and extremely durable. The longer tube passing in front of the engine features aluminum trim, securing the coolant hose and giving a unique look to your engine bay. Optional carbon fiber trim pieces can be purchased seperately (PN 54-13032CC). One-Piece Housing: The included performance air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. Their open design allows for easy viewing of the air filters and delivers an aggressive air intake sound. The system utilizes the vehicle’s OE air inlet with no additional hardware. They utilize the vehicle’s factory air inlet with no additional hardware. Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
    Track Series Carbon Fiber Intake System w/ Pro 5R Filter BMW M2 Competition (F87) 19-21/M3/M4 (F80/82/83) 15-20 L6-3.0L (tt) S55

    • Open-Element Design Showcases the Air Filters and Delivers an Aggressive Air Intake Sound
    • Utilizes Factory Mounting Locations for a Fast and Easy Installation (Roughly 15 Minutes)
    • 100% Twill Weave Carbon Fiber Intake Tubes with Lightweight Housings
    • Washable and Reusable Pro 5R Air Filters for Maximum Performance
    • Dyno-Proven Gains up to +25 HP and +23 Lbs. x Ft. TQ
    • Measured Flow: 815 CFM @ 7″ H2O
    • Outflows Factory Intake by 41%
    1,736.27 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com