-
SuperNano-Web Dry Air Filter: ‘That’s massive!’ is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1300 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume, resulting in added power while keeping the installation process quick and simple.
EVOLUTION Cold Air Intake System, Part No. EVO1300, 2019-2022 Hyundai Veloster N L4-2.0L Turbo- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop integration is designed to capture the largest amount of cool air for max performance
- Replacement air filter part number X-1108-BB (Dry) or X-1108-BR (Oiled Cotton)
- Simple drop-in installation can normally be completed within 20 minutes
- Air Filter attaches to the airbox using our patented TwistLok method
- Box seamlessly adapts to the OE inlet scoop without modification
- Fully serviceable 4.00″ I.D. Injen SuperNano-Web dry air filter
- Manufactured from high-strength XLPE Roto-Molded Polyethylene
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Injen Technology Limited Lifetime Warranty
- Aggressive intake growl under acceleration
- Made in Pomona California, USA
-
Injen 19-22 Hyundai Veloster N L4 2.0L Turbo Performance SS Axle Back Exhaust System – Burnt Ti Tips
Here at Injen, there is no sacrificing build quality. Each and every component included with this kit has been tried, tested, and proven over decades of refinement. The SES1343ABTT utilizes Investment Cast Flanges to provide an incredibly precise fit and finish, not to mention the simplest installation process available. Hand-crafted with only the finest materials, this kit utilizes 76mm 304 Stainless Steel tubing, hangers, and flanges. If the tone alone doesn’t garner enough attention, the twin titanium-look exhaust tips are sure to impress anyone that takes the time to look at what lies beneath. Not to mention, all of Injen’s Exhaust Systems are hand-crafted in Pomona, CA with the highest level of precision possible. Designed to fit into factory mounting locations, with no cutting or drilling required.
Performance Exhaust System, Part No. SES1343ABTT, 2019-2020 Hyundai Veloster N L4-2.0L Turbo- This product utilizes Stainless Steel Investment Cast Flanges for a Precise Fit and Easy Installation
- If you’re looking to improve sound, power, and looks then this is the system for you!
- Bolt-on Exhaust Tip design for infinite adjustability and a perfect fit, every time
- Note: Fits Models WITHOUT Performance Package (Active Variable Exhaust)
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Stainless Steel Hardware and Hangers for a simple install
- 76mm dual muffler design for that signature Injen sound
- Sexy dual-exit exhaust system with Titanium-look tips
- Manufactured from premium 304 SS Mandrel-Bent Tubing
- Designed and manufactured in Pomona, CA
- No Cutting or Welding Required
- Elegant Axle-Back design
-
Injen’s all new Evolution series sealed cold air intake system for the 2019-2024 RAM 1500 (DT) trucks equipped with the V8-5.7L is unmatched in the aftermarket. The EVO8101 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8101 housing encloses an Injen SuperNano-Web Dry air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen’s EVO8101 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.
EVOLUTION Cold Air Intake System, Part No. EVO8101, 2019-2024 RAM 1500 (DT) V8-5.7L- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
- Also available with an 8-Layer oiled Air FIlter: Intake system P/N EVO8101C
- Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
- Intake scoop is designed to capture the largest amount of cool air
- Smooth intake piping eliminates restrictions and improves airflow
- Aggressive under hood appearance while maintaining an OE fit
- Utilizes our patented Twist-Lock Filter attachment system
- Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Fully serviceable Injen SuperNano-Web dry air filter
- Does not fit the classic body (DS) style RAM trucks
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1116-BB
- Designed to work with the stock calibration
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
-
Injen’s all new Evolution series sealed cold air intake system for the 2019-2024 RAM 1500 (DT) trucks equipped with the V8-5.7L is unmatched in the aftermarket. The EVO8101C is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8101C housing encloses an Injen 8-Layer oiled cotton gauze air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen’s EVO8101C comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.
EVOLUTION Cold Air Intake System, Part No. EVO8101C, 2019-2024 RAM 1500 (DT) V8-5.7L- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
- Also available with our SuperNano-Web Dry Air Filter: Intake system P/N EVO8101
- Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
- Intake scoop is designed to capture the largest amount of cool air
- Smooth intake piping eliminates restrictions and improves airflow
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
- Aggressive under hood appearance while maintaining an OE fit
- Utilizes our patented Twist-Lock Filter attachment system
- Optional Injen air filter cleaning kit part number X-1030
- Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Does not fit the classic body style (DS) RAM trucks
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1116-BR
- Designed to work with the stock calibration
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
-
The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems and the EVO8008 is no exception. The Injen EVO8008 is specifically engineered for the 2019-2022 RAM trucks with the 6.7L Cummins Diesel engine. This amazing intake system was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque across the entire powerband. The EVO8008 is a beautiful system that features our patented twist-lock filter mounting system, our patented MR technology for precise fueling without check engine lights, a massive 360 degree SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and an integrated scoop that seamlessly connects to your factory inlet to deliver that cool, crisp air that your turbo diesel demands.
EVOLUTION Cold Air Intake System, Part No. EVO8008, 2019-2022 RAM 2500/3500 L6-6.7L Turbo Diesel- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
- Also available is our X-Pedal Throttle Response Controller: Part Number PT0013B
- Also available with an 8-Layer oiled Air Filter: Intake system P/N EVO8008C
- Fully functional scoop works seamlessly with the factory ram air scoop
- Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
- Intake scoop is designed to capture the largest amount of cool air
- Smooth intake piping eliminates restrictions and improves airflow
- Aggressive under hood appearance while maintaining an OE fit
- Utilizes our patented Twist-Lock Filter attachment system
- Dyno Proven gains of up to 15 hp and 33 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- NOTE: Does not fit the classic body style RAM trucks
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1113-BB
- Designed to work with the stock calibration
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
-
The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems and the EVO8008C is no exception. The Injen EVO8008C is specifically engineered for the 2019-2022 RAM trucks with the 6.7L Cummins Diesel engine. This amazing intake system was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque across the entire powerband. The EVO8008C is a beautiful system that features our patented twist-lock filter mounting system, our patented MR technology for precise fueling without check engine lights, a massive 360 degree 8-Layer Oiled Cotton Gauze air filter, a smooth Rotomolded induction tube for reduced restriction levels, and an integrated scoop that seamlessly connects to your factory inlet to deliver that cool, crisp air that your turbo diesel demands.
EVOLUTION Cold Air Intake System, Part No. EVO8008, 2019-2022 RAM 2500/3500 L6-6.7L Turbo Diesel- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
- Also available with our SuperNano-Web Dry Air Filter: Intake system P/N EVO8008
- Also available is our X-Pedal Throttle Response Controller: Part Number PT0013B
- Fully functional scoop works seamlessly with the factory ram air scoop
- Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
- Intake scoop is designed to capture the largest amount of cool air
- Smooth intake piping eliminates restrictions and improves airflow
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
- Aggressive under hood appearance while maintaining an OE fit
- Utilizes our patented Twist-Lock Filter attachment system
- Optional Injen air filter cleaning kit part number X-1030
- Dyno Proven gains of up to 15 hp and 33 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- NOTE: Does not fit the classic body style RAM trucks
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1113-BR
- Designed to work with the stock calibration
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
-
We design every performance product with ease of installation in mind and this exhaust is no different. On the SES2300CF we’ve included V-Band clamps and flanges for the simplest, quickest installation possible. No need for any cutting, drilling, or modification of the vehicle to complete installation. The system uses all factory mounting points for simple and convenient placement and compatibility. To increase performance, we opted for a stepped piping design that keeps the flow rate consistent throughout the length of the exhaust. Keeping the flow rate consistent not only adds performance but also helps keep the tone of the exhaust where we designed it to be throughout the rev range.
Performance Exhaust System, Part No. SES2300CF, 2020-2023 Toyota GR Supra L6-3.0L Turbo (A90/A91).- Emissions: This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#.
- Integrated exhaust valve for normal (quiet) and sport mode (race inspired sound) operation
- Injen’s dual oval, straight-through mufflers for exceptional sound and power output
- Oversized tubing reduces restriction providing increased airflow and performance
- Custom investment cast Y-Pipe equalizes flow for improved performance and sound
- Dyno Proven power increase of 11 HP and 9 Lb.-Ft. of torque at the wheels
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Beautiful V-Band clamps used for a simple, leak-free installation
- Manufactured from huge, mandrel-bent, 304 stainless-steel tubing
- Performance Stepped design for maximum performance and velocity
- Uses all factory mounting locations with factory-style hangers
- Includes all necessary hardware for a hassle-free installation
- Front and mid-section utilizing massive 3.50in (89mm) tubing
- Dual 4.5in (114mm) bolt-on Carbon Fiber Exhaust Tips
- Increase Throttle Response and Decreases Turbo Lag
- Rear section utilizes huge 3.00in (76mm) tubing
- Exhaust Valve uses factory motor: not included
- Designed and manufactured in Pomona, CA
-
You finally have your 2020-2025 BMW G20 3-Series equipped with the Turbo B58 and Turbo Hybrid B58 engine and now the next logical step in your search for power gains is with Injen Technology. The EVO1108 is specifically designed for a drop-in fit in your BMW, including the seamless fitment into the factory air scoop. This easy to install performance cold air intake system allows that hungry Turbo engine to breathe deeper and unleash that additional performance that you’ve been craving. It truly is a win on all levels.
EVOLUTION Cold Air Intake System, Part No. EVO1108, 2020-2025 BMW M240i/M340i/M440i L6-3.0L Turbo/L6-3.0L Turbo Hybrid- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop integration is designed to capture the largest amount of cool air for max performance
- Simple drop-in installation can normally be completed within 20 minutes
- Air Filter attaches to the airbox using our patented TwistLock method
- Box seamlessly adapts to the OE inlet scoop without modification
- Fully serviceable 5.00″ I.D. Injen SuperNano-Web dry air filter
- Manufactured from high-strength XLPE Roto-Molded Polyethylene
- Dynamic under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 13 hp and 11 lb-ft. of torque
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1093-BB
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
-
Your search for the best performing cold air intake that also protects your valuable 2020-2024 Ford F-Series Super Duty is over. You just found the Injen EVO9007 that is specifically engineered for the 2020-2024 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. We’ve taken every ounce of our 20+ years of experience to create the most versatile kit on the market today, without complicating the installation process. With an incredible 63 additional lb-ft. of torque at the pedal, you can be sure that your truck is more than equipped to tackle towing just about any load, all while retaining factory fuel trims and A/F ratios to prevent damage to your expensive motor.
EVOLUTION Cold Air Intake System, Part No. EVO9007, 2020-2024 Ford Diesel Trucks V8-6.7L Powerstroke.- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
- Works seamlessly with our hot and cold side charge pipe system P/N SES9004ICP or SES9004ICPWB
- Includes removable Urethane Plugs for heavily tuned trucks that require additional airflow
- Also available as a kit with our 8-Layer Oiled Air Filter: Intake system P/N EVO9007C
- This intake is CARB approved under EO# D-476-13 for model years 2020-2022.
- No Tune Required – Designed to work seamless with the stock calibration
- Intake tube features Injen’s patented internal MegaRam (MR) Technology
- Durable XLPE Roto-Molded Polyethylene tube and filter housing
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 28 hp and 63 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- 2023-2024 models have not yet received CARB approval
- Reinforced automotive grade silicone couplers
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1116-BB
- Made in Pomona California, USA
-
Your search for the best performing cold air intake that also protects your valuable 2020-2024 Ford F-Series Super Duty is over. You just found the Injen EVO9007C that is specifically engineered for the 2020-2024 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. We’ve taken every ounce of our 20+ years of experience to create the most versatile kit on the market today, without complicating the installation process. With an incredible 63 additional lb-ft. of torque at the pedal, you can be sure that your truck is more than equipped to tackle towing just about any load, all while retaining factory fuel trims and A/F ratios to prevent damage to your expensive motor.
EVOLUTION Cold Air Intake System, Part No. EVO9007C, 2020-2024 Ford Diesel Trucks V8-6.7L Powerstroke.- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
- Works seamlessly with our hot and cold side charge pipe system P/N SES9004ICP or SES9004ICPWB
- Includes removable Urethane Plugs for heavily tuned trucks that require additional airflow
- Also available as a kit with our Dry Air Filter: Intake system P/N EVO9007
- This intake is CARB approved under EO# D-476-13 for model years 2020-2022.
- No Tune Required – Designed to work seamless with the stock calibration
- Intake tube features Injen’s patented internal MegaRam (MR) Technology
- Durable XLPE Roto-Molded Polyethylene tube and filter housing
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 28 hp and 63 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Optional Injen air filter cleaning kit part number X-1030
- Stainless steel band clamps with inner protective liner
- 2023-2024 models have not yet received CARB approval
- Reinforced automotive grade silicone couplers
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1116-BR
- Made in Pomona California, USA
-
You already purchased the sporty 2020-2024 Polaris Slingshot and now you’re hunting for an intake system that’ll give you the sound you crave, the power you demand, and the under hood looks you desire. Look no further because Injen has exciting news for you! The PS7001 performance cold air intake from Injen Technology will allow that L4-2.0L engine found in your Slingshot to breathe deeper and provide the added performance that you’ve been craving. Injen Technology has gone steps further than the competition in this design ? for example – by designing a full intake system that keeps the IAT sensor inside the airflow path for far superior fuel trim calibrations during normal driving. This isn’t just some filter on the end of the stock intake tube like the competition has brought to market; the Injen intake is a fully engineered system that is designed and manufactured by the same people that gave you the best-selling intake for the Gen1 Slingshot!
PS Cold Air Intake System, Part No. PS7001WR, 2020-2024 Polaris Slingshot L4-2.0L- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- IAT sensor remains in the intake tract and not relocated to a heatshield like the competition
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 11 hp and 9 lb-ft. of torque
- Mandrel-bent 4.0in O.D. 6061-T6 aluminum intake tubing
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1127-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional Hydroshield part number 1077BLK
- Available in three amazing finishes:
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
- PS7001P (Polished Finish)
- PS7001WB (Wrinkle Black)
- PS7001WR (Wrinkle Red)
-
The legendary Toyota Supra has returned for 2020! A legend only deserves the best and the Injen Race Series Cat-Back Single-Exit Exhaust System Delivers! Specifically engineered for the 2020-2023 Toyota GR Supra equipped with the L6-3.0L Turbo, this system was designed from the ground up to compliment the aggressive styling and blistering performance of these sporty sedans. Our race inspired single-exit design hones the tone of the engine into an ear-pleasing symphony. Purposefully delivering a crisp, clean, deep rumble at idle and an aggressive roar when you’re pushing the limits.
Race Series Performance Exhaust System, Part No. SES2300RS, 2020-2023 Toyota GR Suupra L6-3.0L Turbo (A90/A91)- NOTE: This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#.
- Race Exhaust design that eliminates all factory mufflers, resonators, and valves for race inspired weight reduction and sound
- No-tip racing design that utilizes oversized 3.50in tubing the entire length of the exhaust
- Dyno Proven power increase of 10 HP and 11 Lb.-Ft. of torque at the wheels
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- A savings of over 20lbs when compared to the stock exhaust system!
- Beautiful V-Band clamps used for a simple, leak-free installation
- Manufactured from huge, mandrel-bent, 304 stainless-steel tubing
- Uses all factory mounting locations with factory-style hangers
- Includes all necessary hardware for a hassle-free installation
- Increase Throttle Response and Decreases Turbo Lag
- Designed and manufactured in Pomona, CA
- Race-Inspired single exit design
- Emissions
Showing 19465–19476 of 29420 results