-
EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.
Yellowstuff Street And Track Brake Pads; FMSI Pad No. D592; Vented; 330mm Dia.; 62mm Height; 32mm Thick; 73.4mm Center Hole Dia.; Pad Dimensions: 110 x 69 x 17mm;- Zero Fade Race Developed Compound
- Brakes Effective Right From Cold
- Can Be Used On Street/Race Track
- Better High Speed Stopping
- High Friction Pad
-
EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.
Yellowstuff Street And Track Brake Pads; FMSI Pad No. D491; Pad Dimensions: 123 x 59 x 15mm;- Zero Fade Race Developed Compound
- Brakes Effective Right From Cold
- Can Be Used On Street/Race Track
- Better High Speed Stopping
- High Friction Pad
-
There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Redstuff Ceramic Low Dust Brake Pads; FMSI Pad No. D608; Vented; 298mm Dia.; 80.5mm Height; 28mm Thick; 120.6mm Center Hole Dia.; Pad Dimensions: 97 x 65 x 16mm;- Great For Fast Street And Premium Sedan
- Ideal European Vehicle Brake Upgrade
- High Friction Low Heat Fade
- Lowest Dust Pad In Range
-
EBC Ultimax Slotted Rotors offer you the performance of slotted rotors but without the air noise that is normally associated with slotted rotors. The progressively angled slots on the EBC Ultimax Slotted Brake Rotors offer quiet brake operation without that excessive air noise, while still allowing the slots to help keep your brakes cool. The angled slots pull in cool air for cooler brake operation which helps your brakes perform at their best. The slots also help to clear any excess dust and debris to help keep pad grip to a maximum while also increasing pad longevity.
Ultimax OE Style Disc Set; Rear; For FMSI Pad No. D608; Vented; 5 Bolt Holes; 299mm Dia.; 74mm Height; 28mm Thick; 103mm Center Hole Dia.;- Ultimax OE Style Disc Kit
-
EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.
Yellowstuff Street And Track Brake Pads; FMSI Pad No. D608; Vented; 298mm Dia.; 80.5mm Height; 28mm Thick; 120.6mm Center Hole Dia.; Pad Dimensions: 97 x 65 x 16mm;- Zero Fade Race Developed Compound
- Brakes Effective Right From Cold
- Can Be Used On Street/Race Track
- Better High Speed Stopping
- High Friction Pad
-
EBC Ultimax Slotted Rotors offer you the performance of slotted rotors but without the air noise that is normally associated with slotted rotors. The progressively angled slots on the EBC Ultimax Slotted Brake Rotors offer quiet brake operation without that excessive air noise, while still allowing the slots to help keep your brakes cool. The angled slots pull in cool air for cooler brake operation which helps your brakes perform at their best. The slots also help to clear any excess dust and debris to help keep pad grip to a maximum while also increasing pad longevity.
Cross Drilled Rotor Set; Front; For FMSI Pad No. D609; Vented; 5 Bolt Holes; 322mm Dia.; 77mm Height; 32mm Thick; 103mm Center Hole Dia.;- Ultimax OE Style Disc Kit
-
An excellent solution for 4×4 use, this heavy duty Greenstuff formulation has slightly lower friction than its 2000 series counterpart (average friction coefficient 0.45mm) but has the benefit of longer life and better resistance to offroad conditions of dust and sand etc. It has an extremely low rotor wear factor and medium-to-good lifetime.
6000 Series Greenstuff Truck/SUV Brakes Disc Pads; FMSI Pad No. D433; Vented; 254mm Dia.; 41mm Height; 21.8mm Thick; 86mm Center Hole Dia.; Pad Dimensions: 116 x 53 x 17mm;- Sport Replacement Pad For Truck/SUV
- Improves Stopping Power
- Lower Dust
-
EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.
Yellowstuff Street And Track Brake Pads; FMSI Pad No. D433; Vented; 254mm Dia.; 41mm Height; 21.8mm Thick; 86mm Center Hole Dia.; Pad Dimensions: 116 x 53 x 17mm;- Zero Fade Race Developed Compound
- Brakes Effective Right From Cold
- Can Be Used On Street/Race Track
- Better High Speed Stopping
- High Friction Pad
-
All EBC rotors are made from OE spec grey cast iron, exactly as used on new car production and as many as we have tools for are BRITISH MADE wholly in our own UK foundry. Currently EVERY SINGLE ROTOR sold in Europe and the UK is BRITISH MADE and a majority of the designs specific to the USA are also BRITISH made.The British foundry is constantly expanding its in house tooled range but EBC like every brake manufacturer ….does need occasionally to buy some rotors in from approved sources to complete ranges in overseas markets. None of our competitors will ever tell you where their rotors come from and we at EBC are as disappointed as the rest of the world that cost pressure means there is not ONE foundry left in the USA to supply such parts, other brake brands when asked about origin will just sidestep the question. When we do buy rotors in, they are specified, sampled, tested for element analysis, grain structure, tensile strength, hardness and optimum ductility and tested 100 piece by piece to be perfect for runout on this in house machine.
3GD Series Sport Slotted Rotor Set; Rear; For FMSI Pad No. D374; Solid; 4 Bolt Holes; 239mm Dia.; 48mm Height; 10mm Thick; 61mm Center Hole Dia.;- Removes Dirt Dust And Debris From Braking Zone
- Anodized For Protection/Black For Domestics
- Reduces Brake Fade Under Load And At Speed
- Great For Truck/SUV/Towing/For Sedan Use
- Anodized For Protection/Gold For Imports
- Wide Slots Helps Brakes Run Cooler
-
EBC Ultimax Slotted Rotors offer you the performance of slotted rotors but without the air noise that is normally associated with slotted rotors. The progressively angled slots on the EBC Ultimax Slotted Brake Rotors offer quiet brake operation without that excessive air noise, while still allowing the slots to help keep your brakes cool. The angled slots pull in cool air for cooler brake operation which helps your brakes perform at their best. The slots also help to clear any excess dust and debris to help keep pad grip to a maximum while also increasing pad longevity.
Ultimax OE Style Disc Set; Rear; For FMSI Pad No. D374; Solid; 4 Bolt Holes; 239mm Dia.; 48mm Height; 10mm Thick; 61mm Center Hole Dia.;- Ultimax OE Style Disc Kit
-
There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Redstuff Ceramic Low Dust Brake Pads; FMSI Pad No. D374; Solid; 239mm Dia.; 48mm Height; 10mm Thick; 61mm Center Hole Dia.; Pad Dimensions: 89 x 35 x 13mm;- Great For Fast Street And Premium Sedan
- Ideal European Vehicle Brake Upgrade
- High Friction Low Heat Fade
- Lowest Dust Pad In Range
-
Choose from EBC plain non drilled rotors or sport rotors in two choices – wide aperture 3GD series for cooler running or new SUPER SILENT Ultimax USR slotted series. All EBC rotors are British made and are precision machined in the UK. Rotors are made from high quality grey iron to exacting standards and undergo extensive testing and rigorous quality control.Slotted rotors can significantly improve brake performance and longevity when used with a matching high friction pad set. Having sold hundreds of thousands of brake kits EBC Brakes feel confident their approach is as perfect as it gets.
USR Series Sport Slotted Rotor Set; Rear; For FMSI Pad No. D374; Solid; 4 Bolt Holes; 239mm Dia.; 48mm Height; 10mm Thick; 61mm Center Hole Dia.;- Narrow Slots Reduce Air Noise
- Reduced Brake Fade At Speed
- Pads Stay Smooth And Flat
- Ideal For Premium Sedans
- Brakes Run Cooler
Showing 19213–19224 of 52837 results