0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

AEM Bosch UEGO Replacement Sensor

AEM’s Bosch 4.2LSU Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM wideband air/fuel UEGO controllers.These sensors have a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output. The wideband sensor is laboratory-calibrated at the Bosch factory, accurate to 0.1 AFR and never requires free-air calibration when used with an AEM wideband AFR controller.Replacement Sensor for the following AEM Wideband Controllers.AEM Infinity Engine Management Systems30-4100 – Digital Wideband UEGO Gauge30-4900 – Wideband Failsafe Gauge30-2310 – Inline Wideband UEGO Controller30-2340 – 4-Channel Wideband UEGO Controller30-2340-N – 4-Channel Wideband UEGO Controller – Nascar30-5130 – Analog Wideband UEGO Gauge30-5143 – Analog E85 Wideband UEGO Gauge30-2320 – X-WiFi Wideband/EGT Controller
Bosch LSU 4.2 Wideband UEGO Replacement Sensor, Sensor Only

  • High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area)
  • Never requires free-air calibration when used with an AEM Controller and connector plug.
  • Connector and pins included
  • Replacement sensor only

158.40 $

SKU 30-2001
brand AEM
Add to wishlist Add to compare

Description

AEM’s Bosch 4.2LSU Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM wideband air/fuel UEGO controllers.These sensors have a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output. The wideband sensor is laboratory-calibrated at the Bosch factory, accurate to 0.1 AFR and never requires free-air calibration when used with an AEM wideband AFR controller.Replacement Sensor for the following AEM Wideband Controllers.AEM Infinity Engine Management Systems30-4100 – Digital Wideband UEGO Gauge30-4900 – Wideband Failsafe Gauge30-2310 – Inline Wideband UEGO Controller30-2340 – 4-Channel Wideband UEGO Controller30-2340-N – 4-Channel Wideband UEGO Controller – Nascar30-5130 – Analog Wideband UEGO Gauge30-5143 – Analog E85 Wideband UEGO Gauge30-2320 – X-WiFi Wideband/EGT Controller
Bosch LSU 4.2 Wideband UEGO Replacement Sensor, Sensor Only

  • High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area)
  • Never requires free-air calibration when used with an AEM Controller and connector plug.
  • Connector and pins included
  • Replacement sensor only

Specification

Weight 0.38 kg
Dimensions 4.6 × 4.2 × 2.4 cm
air_freight_prohibited

false
not_carb_approved

false
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

t
units_per_sku

1
upc

840879010850
brand

AEM
part_number

30-2001

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 24311

    NGK Audi A8 Quattro 2007-2005 Direct Fit 5-Wire Wideband A/F Sensor

    No Reviews

    NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
    NTK is constantly improving sensor designs to provide excellent performance and improve resistance to failure. NTK works with their OEM manufacturers through each phase of development from concept to production.

    • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
    226.57 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 24332

    NGK BMW 528i 2011 Direct Fit 5-Wire Wideband A/F Sensor

    No Reviews

    NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
    NTK is constantly improving sensor designs to provide excellent performance and improve resistance to failure. NTK works with their OEM manufacturers through each phase of development from concept to production.

    • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
    258.54 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 25715

    NGK Mercedes-Benz G550 2015-2009 Direct Fit Oxygen Sensor

    No Reviews

    NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
    NTK is constantly improving sensor designs to provide excellent performance and improve resistance to failure. NTK works with their OEM manufacturers through each phase of development from concept to production.

    • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
    227.96 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 24324

    NGK Volkswagen Beetle 2005 Direct Fit 5-Wire Wideband A/F Sensor

    No Reviews

    NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
    NTK is constantly improving sensor designs to provide excellent performance and improve resistance to failure. NTK works with their OEM manufacturers through each phase of development from concept to production.

    • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
    211.28 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com